You know, your channel reminds me of Project Farm. You're like the welder version of Project Farm, since you test pretty much everything! If it's not already copyrighted, you too should start saying something along the lines of "we're gonna test that!" 😁
I paid $79 CDN for my Zojan 250. It’s real output is @ 130 amps DC. I’ve used it a few times but it’s really just a wall ornament in my shop. I did replace the power cord with a chassis grounded wire.
I hope you saved that strap for a Ghostbusters costume. Care to elaborate on the issues you found working with different rods? Thank you for the upload.
In the last third of the video or so I do talk about how different rods run. 6010 doesn't work with this machine, but that's no surprise because it doesn't run well on a lot of inverter machines. Other than that it was really just a matter of the welder not liking even a moderate length arc. If you keep a tight arc it will run 3/32" 7018, 6013 and 7014 without much trouble. 6011 is a bit tougher to keep going.
Could you get by with a 20 amp 220v plug instead of the 50amp. Reason is that the welder power cord wire guage and insulation will not handel 50amps anyways. Look at the size wire on an electric stove 50amp breaker. It's much larger to carry 50 amps. Thanks
@@bigtb1717 How long did it take to receive your welder once you ordered it? One more thing another review I saw of this type of small welder outfitted it witha Tig torch. They said it actually worked really good using the Tig method. Thanks
@@russellmatheny8677 I can't remember exactly how long it took, but I don't think it was very long. I think around a week. But I did order if from a seller on Amazon. I'm sure it varies depending on where you buy one.
This welder and the Juba ZX7-200 do surprisingly well for the price, as long as you understand that you will have to get cables, clamp, electrode holder and a 240V plug for the cord. And as long as you understand that you may not have much in the way of a warranty if you ever have issues. Otherwise, sure, it's a super small, light, and relatively inexpensive way to get started.
It can not be used for MIG welding. Welding on motorcycle frames in general should be approached very cautiously. There is too much chance for disaster if something breaks.
Its only a stick welder and if you dont know that sir i dont know if you should be welding on motorcycle frames. Could be realy dangerous fo the operator.
I can't say one way or another about long lasting. I haven't actually used it since the video. It's really not the best value. It doesn't come with any welding leads or even a cord end for the power cord. By the time you add those you probably could have purchased a much more capable machine.
Thanks man, I was looking for a small stick welder to do some work with around the outside of the house, I am looking at the Fronius Transpocket 180, seems like a very nice machine and can do 6010 like a champ but it cost north of $1200, its small in size but not as small as this chicom welder.
Honestly, the ESAB 161 LTS would be great for what you are looking for. Does 6010, small and light (smaller and lighter than the Transpocket 180). It has less output than the TP 180, but it is also dual voltage, which is very nice for a portable, around the house, odd-job welder. I picked mine up for around $485 locally. Definitely worth a look if you are in the market.
Obviously though, not nearly as small as this welder. But at a max of 130A output, and 240V input only, it is quite a bit more limited. Also, this machine simply doesn't weld as smooth as the 161 LTS, or even other Chinese welders (or, I'm sure, the Fronius).
Thanks again. I am not in the US, and ESAB 161 LTS is available only in the US, however, if I am to consider the ESAB (which I did) at one third of the price, I have the ESAB Buddy Arc 200 (I suppose it's the same machine with a different name?) available here at around $500, which is not a bad deal for a 200 amp machine?
Yeah, I had a feeling you weren't in the US since the Fronius stuff is rare around here. I know ESAB is available other places, but didn't know specifically which models. 240V may be the standard where you are, so the dual voltage option probably isn't as big of a deal.
True, however, it'd be nice to have a portable welder that's 110v as well as 220v so I can take it with me when I get back to the US. Specially since my stationary main welder is 220v. I think the ESAB 200 is a better deal for me money wise as I'm finding it hard to justify the Fronius even though Fronius seems to be the Ferraris of welders, or so they claim.
Daker Holdings llC Imagine what would happen if you changed the battery in your car from 12V to 6V? Car won't start! Dropping the voltage by half, will half the current if it will work properly at 110V at all.
@vial.of.photons Yes, some welders are dual voltage. This one is not. It is not designed for 110V. At 220V you would most likely only get about 120A-130A max. The Chinese lie all the time with regards to specs.
Let me know if you actually receive it in working order. Seems too cheap to be true. Right now it's priced around $85-$100 everywhere I see it (ebay, alibaba, aliexpress, amazon, etc.). Can't imagine they could even ship it from China for $9, much less throw the shipping in free. But that's crazy cheap if legit.
It was so funny that someone sent a Chinese manual instruction to a customer who didn't know chineses
Omg skip 4 minutes to opening the box!
Fast forward 15 minutes .He talks and says nothing. Good God start welding
I ordered one that is 400 amps. I found out eventually it only produces half the amps the digital display states.
Thanks for taking the time to review this welder,. The unboxing was good for a laugh.
Got one just like this and it works great!!
Steven Ray scan the instructions to pdf then translate with your phone
This welder reminds me of my Everlast 140st welder back at home. Very reliable and useful.
It's so adorable so tiny
You know, your channel reminds me of Project Farm. You're like the welder version of Project Farm, since you test pretty much everything! If it's not already copyrighted, you too should start saying something along the lines of "we're gonna test that!" 😁
I paid $79 CDN for my Zojan 250. It’s real output is @ 130 amps DC. I’ve used it a few times but it’s really just a wall ornament in my shop. I did replace the power cord with a chassis grounded wire.
At last, a welding toaster! Brilliant!!
220 input ok or not
Yes, 220 volt input will work for this welder.
i am going to buy an igbt converter model but im afraid about durability. which is good? DC inverter or BX6 AC model? Thanks
Can the Ingco welder do big grill jobs and weld thick steele
Ingco is one brand I haven't looked at. Which model are you looking at?
What is the cost of indian rupees?
¿And electrode 6011 celulosic?
I hope you saved that strap for a Ghostbusters costume.
Care to elaborate on the issues you found working with different rods?
Thank you for the upload.
In the last third of the video or so I do talk about how different rods run. 6010 doesn't work with this machine, but that's no surprise because it doesn't run well on a lot of inverter machines. Other than that it was really just a matter of the welder not liking even a moderate length arc. If you keep a tight arc it will run 3/32" 7018, 6013 and 7014 without much trouble. 6011 is a bit tougher to keep going.
@@bigtb1717 hmm wonder how it'll do with a coat hanger.
You are honest
Could you get by with a 20 amp 220v plug instead of the 50amp. Reason is that the welder power cord wire guage and insulation will not handel 50amps anyways. Look at the size wire on an electric stove 50amp breaker. It's much larger to carry 50 amps. Thanks
I used that plug because that is the receptacle I have in my garage. If you have a different 240V receptacle, I’m sure it would work.
@@bigtb1717 How long did it take to receive your welder once you ordered it? One more thing another review I saw of this type of small welder outfitted it witha Tig torch. They said it actually worked really good using the Tig method. Thanks
@@russellmatheny8677 I can't remember exactly how long it took, but I don't think it was very long. I think around a week. But I did order if from a seller on Amazon. I'm sure it varies depending on where you buy one.
For 80 , to learn on and do a few small jobs ? Or no ?
This welder and the Juba ZX7-200 do surprisingly well for the price, as long as you understand that you will have to get cables, clamp, electrode holder and a 240V plug for the cord. And as long as you understand that you may not have much in the way of a warranty if you ever have issues. Otherwise, sure, it's a super small, light, and relatively inexpensive way to get started.
@@bigtb1717 appreciate the expertise
teardown it:) if its having 4igbt its good welder:)
can igbt inverter model use at least 3,4 years at home use? any burn?
could it be used for welding motorcycle frames, and used for MIG welding?
It can not be used for MIG welding. Welding on motorcycle frames in general should be approached very cautiously. There is too much chance for disaster if something breaks.
Its only a stick welder and if you dont know that sir i dont know if you should be welding on motorcycle frames. Could be realy dangerous fo the operator.
Im gonna tig convert it like TFS is this good, but im unsure how to build the plug thing
Are you talking about the dinse plug for the torch?
For mine I used a CK9 torch and torch adapter. I can give you links if you want.
Great review. Thx
Please sir
I would buy myself a small welding machine like this
Or is it just a waste of money
Is it effective and long lasting
I can't say one way or another about long lasting. I haven't actually used it since the video. It's really not the best value. It doesn't come with any welding leads or even a cord end for the power cord. By the time you add those you probably could have purchased a much more capable machine.
They last a good amount of time i have one and it runs grate i have it for 1 year now welding here and there random stuff
@@bigtb1717 for example , what can be buy for better value
Thanks man, I was looking for a small stick welder to do some work with around the outside of the house, I am looking at the Fronius Transpocket 180, seems like a very nice machine and can do 6010 like a champ but it cost north of $1200, its small in size but not as small as this chicom welder.
Honestly, the ESAB 161 LTS would be great for what you are looking for. Does 6010, small and light (smaller and lighter than the Transpocket 180). It has less output than the TP 180, but it is also dual voltage, which is very nice for a portable, around the house, odd-job welder. I picked mine up for around $485 locally. Definitely worth a look if you are in the market.
Obviously though, not nearly as small as this welder. But at a max of 130A output, and 240V input only, it is quite a bit more limited. Also, this machine simply doesn't weld as smooth as the 161 LTS, or even other Chinese welders (or, I'm sure, the Fronius).
Thanks again. I am not in the US, and ESAB 161 LTS is available only in the US, however, if I am to consider the ESAB (which I did) at one third of the price, I have the ESAB Buddy Arc 200 (I suppose it's the same machine with a different name?) available here at around $500, which is not a bad deal for a 200 amp machine?
Yeah, I had a feeling you weren't in the US since the Fronius stuff is rare around here. I know ESAB is available other places, but didn't know specifically which models.
240V may be the standard where you are, so the dual voltage option probably isn't as big of a deal.
True, however, it'd be nice to have a portable welder that's 110v as well as 220v so I can take it with me when I get back to the US. Specially since my stationary main welder is 220v. I think the ESAB 200 is a better deal for me money wise as I'm finding it hard to justify the Fronius even though Fronius seems to be the Ferraris of welders, or so they claim.
Why not try it in 110v & see what happens?
Daker Holdings llC
Imagine what would happen if you changed the battery in your car from 12V to 6V? Car won't start!
Dropping the voltage by half, will half the current if it will work properly at 110V at all.
@vial.of.photons
Yes, some welders are dual voltage. This one is not. It is not designed for 110V. At 220V you would most likely only get about 120A-130A max. The Chinese lie all the time with regards to specs.
"The power of leader" haha
I just ordered this EXACT welder for 8.99 free shipping from China. 100 dollars you got ripped off MAJORLY. Great review though thanks.
Let me know if you actually receive it in working order. Seems too cheap to be true. Right now it's priced around $85-$100 everywhere I see it (ebay, alibaba, aliexpress, amazon, etc.). Can't imagine they could even ship it from China for $9, much less throw the shipping in free. But that's crazy cheap if legit.
has the welder actually shipped? anything under 60 dollars looks like a scam
Got mine for 35.00.