INSTALLING CENTRIFUGE TOURNIQUET BRACKET

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ม.ค. 2025

ความคิดเห็น • 66

  • @jackmccarty1309
    @jackmccarty1309 5 ปีที่แล้ว +21

    Hey man, just a helpful hint, the TQ holder you have is made for a sof-t wide TQ not a CAT. The issue is the one you have in the video is not deep enough for the CAT, which causes it to sit too high and interfere with the bail going forward. I run the same setup as my duty holster and it functions flawlessly with the correct TQ holder.

    • @tr7287
      @tr7287 4 ปีที่แล้ว

      I don’t think you’re correct. This TQ holder is made for the CAT. In fact, I had another TQ and it won’t fit this holder so I went and bought a CAT TQ and now it fits. You just have to fold it the right way. It’s gonna be tight but it fits. What is a “soft-t wise” TQ? You have a link?

    • @jackmccarty1309
      @jackmccarty1309 4 ปีที่แล้ว

      www.tacmedsolutions.com/SOF-Tourniquet-Gen-4
      Eleven 10 makes TQ holders for both models.

    • @michaelpeery4221
      @michaelpeery4221 4 ปีที่แล้ว

      Yeah he’s right, that model is for the wrong tourniquet, I run both models

    • @zunrue1
      @zunrue1 2 ปีที่แล้ว

      @@tr7287 the box literally says "for sof-t wide tourniquet"
      The model he got is not for the CAT

    • @tacticalministries3508
      @tacticalministries3508 2 ปีที่แล้ว +1

      @@tr7287 the box clearly says for SOF T wide, the CAT version is shaped different. I wear that TQ holster on my belt

  • @Drone86
    @Drone86 5 ปีที่แล้ว +9

    “It’s not gonna get in the way” as the hood hits the TQ. See if it’s possible to set the holder lower, there were a lot of mounting holes on the back of the TQ holder

  • @jonathanclaypool563
    @jonathanclaypool563 ปีที่แล้ว

    Awesome video man did the holder come with the mount?

  • @grant81992
    @grant81992 4 ปีที่แล้ว +1

    The ones they issue now have washers on the backside and state that the small screws attach the TQ hlder to the strut. So they provide two extra screws with washers now? Also the new ones only have two holes that mount to the TQ holder so they must want you to use their screws that they now provide with their washers. I'll try to post a pic later.

    • @johnaguilera642
      @johnaguilera642 4 ปีที่แล้ว

      How did you get the bottom screw in. I can’t seem to fit my finger in the TQ holster to screw in the other half

    • @grant81992
      @grant81992 4 ปีที่แล้ว +1

      @@johnaguilera642 The bottom screw on the TQ holder? Work on that screw first and then the top ones. I didn't have a problem but I also have skinny hands.

  • @ralphyboy3856
    @ralphyboy3856 6 ปีที่แล้ว +1

    Nice Blooper Video not alot of people go this route. You made it like a rookie LOL 😝😝 Over all you have great stuff to show us. This is something i will definitely be getting. Thanks for you sevices brother

    • @thatgeardude
      @thatgeardude  6 ปีที่แล้ว +3

      Ralph Lugo lol get used to it. All my videos will be like this. They are quick and I can get info out faster this way specially with how busy I am with real world stuff. Think of them like you being there as my buddy and me showing you around. Can you bring some Chick-fil-A on your way in? lol

    • @ralphyboy3856
      @ralphyboy3856 6 ปีที่แล้ว

      @@thatgeardude WHAT A FATTY LOL!!!
      broke my Heart cause the setup doesn't work on the Safariland 7 series 😭😭

  • @Chris-1742
    @Chris-1742 5 ปีที่แล้ว +1

    Where can I get this? Centrifuge doesn’t show the product on their website currently.

  • @OffDuty
    @OffDuty 6 ปีที่แล้ว +3

    Looks legit. I'm interested to see how it performs and hopefully you find a way so it doesn't affect the hood.
    Great simple video 👌

    • @Mlopez_602
      @Mlopez_602 6 ปีที่แล้ว +1

      Looks like if you only use 2 screws and mount it lower the hood won't be affected.

    • @thatgeardude
      @thatgeardude  6 ปีที่แล้ว +2

      I fixed it and it doesn't mess with the hood at all. I lowered the 1110 pouch down one notch.

    • @OffDuty
      @OffDuty 6 ปีที่แล้ว

      @@thatgeardude Sweeeet.

  • @tr7287
    @tr7287 4 ปีที่แล้ว

    Is it necessary to take off the two plastic barrel and light caps at the bottom of the holster? Do you have to take both off or one? Thanks.

  • @maurobonino9654
    @maurobonino9654 3 ปีที่แล้ว

    Which support should be used to mount the hard case on a Safariland 6360 holster without torch for Beretta Px4 Storm?

  • @7djsavage21
    @7djsavage21 5 ปีที่แล้ว +1

    Looks good. But yeah like you said you just have to fold the tq better to get it to sit lower in the holder.

  • @RedTexan_Ram
    @RedTexan_Ram 6 ปีที่แล้ว +1

    That’s badass for guys like me very slim my duty belt doesn’t have enough space. But the tourniquet might fall out of the pouch

    • @Mannydeleon12
      @Mannydeleon12 5 ปีที่แล้ว

      You have to literally rip it out....the TQ doesn’t fall out easily. I’ve been in fights and like I said, it has to be ripped out otherwise it stays in 👌🏼

  • @joshuabrown9439
    @joshuabrown9439 4 ปีที่แล้ว +1

    Volume is low but you have found yourself a new subscriber! I'm check more of your vids tomorrow

    • @thatgeardude
      @thatgeardude  4 ปีที่แล้ว

      Yup lol working on it 🥵

  • @Christian-cr5oz
    @Christian-cr5oz 5 ปีที่แล้ว +1

    The PD I work for issues the 7000 series. I use a ALS Safariland 7360 for my Sig P226. Do they manufacture these for my type of holster?

    • @thatgeardude
      @thatgeardude  5 ปีที่แล้ว +1

      Neg, only for the 6000 series rn

  • @DragoChronicSmoker42
    @DragoChronicSmoker42 5 ปีที่แล้ว +2

    good video, i do wonder though..if any one has went reach for their pistol and accidentally pulled out the tourniquet lol

  • @uwishucould158
    @uwishucould158 3 ปีที่แล้ว

    Seems bulky. How do you like it?

  • @nraines89
    @nraines89 6 ปีที่แล้ว +2

    I know Solomon's are probably your favorite tactical boot. Most LEO's have to wear a polishable toe on duty. What boot do you recommend with a polishable toe? Maybe an idea for a video.🤙

    • @thatgeardude
      @thatgeardude  6 ปีที่แล้ว

      ive heard of some using the salomon jungle boots. have you tried those?

    • @nraines89
      @nraines89 6 ปีที่แล้ว

      @@thatgeardude didn't know they existed.

    • @chadlogan2215
      @chadlogan2215 6 ปีที่แล้ว +1

      I’m late to the argument but I wear the Merrell tactical boots in a 5-6 inch(low tops). They are extremely comfortable but I would recommend the taller version just bc it messes with the pant leg getting in and out of the truck. They are a version of the MOAB hiking boots I believe. Polishable toe and all black

  • @IKRYPTONxKNIGHTI
    @IKRYPTONxKNIGHTI 6 ปีที่แล้ว +1

    Is there a link for this bracket ?

  • @chriss2981
    @chriss2981 4 ปีที่แล้ว

    Do you have the negative cant on that setup from blackbox?

  • @Mlopez_602
    @Mlopez_602 6 ปีที่แล้ว +3

    Good idea. I would suggest some thread locker on the screws though.

  • @buddyxfren8309
    @buddyxfren8309 6 ปีที่แล้ว +1

    Rookie deputy here. I'd love to see you make a video on what it takes to be swat and your take on it. swat is one of those things that gets praised but never gets talked about.

  • @Deftonic101
    @Deftonic101 4 ปีที่แล้ว

    There's an updated version of this and looks more sturdy!

  • @Pauliminator
    @Pauliminator 6 ปีที่แล้ว

    Please put a link into the video description. Greetings from a german LEO!

  • @martinksepka2190
    @martinksepka2190 4 ปีที่แล้ว

    Will this work with a safariland 6360 non light bearing level 3 holster?

  • @garthbalcom6334
    @garthbalcom6334 3 ปีที่แล้ว

    Can anyone please help in answering this, I have a Safariland QLS system for Smith and Wesson 2.0 . Non light bearing and no red dot. So I would need to purchase the TQ Strut for my holster? Any help would be great .

    • @garthbalcom6334
      @garthbalcom6334 3 ปีที่แล้ว

      ...S/ W 2.0 4.25 barrel.

    • @zunrue1
      @zunrue1 2 ปีที่แล้ว

      If you want a tq on your holster you would need the strut

  • @BrandensOutdoorChannel
    @BrandensOutdoorChannel 3 ปีที่แล้ว

    uniform reminds me of Broward County

  • @benedictnoonan1525
    @benedictnoonan1525 6 ปีที่แล้ว +1

    I love the videos, keep up the good work. What watch are you wearing?

    • @findley9844
      @findley9844 6 ปีที่แล้ว +1

      Benedict Noonan it’s the Garmin tactix Charlie

    • @thatgeardude
      @thatgeardude  6 ปีที่แล้ว

      garmin charlie

  • @averyvenegas5077
    @averyvenegas5077 6 ปีที่แล้ว

    Can you link the multitasker?

  • @bigtank1982
    @bigtank1982 5 ปีที่แล้ว

    I’m waiting for them to come in stock or gen 2! Can’t get them right now

    • @tr7287
      @tr7287 4 ปีที่แล้ว

      centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

  • @policetributechannel7166
    @policetributechannel7166 6 ปีที่แล้ว +1

    Great video man! #thinblueline #thatgeardudesquad

  • @TheVatrap
    @TheVatrap 5 ปีที่แล้ว +1

    I have a 7390 😞

  • @alexf4659
    @alexf4659 5 ปีที่แล้ว +1

    It looks like this product is no longer manufactured.

    • @aburkett44
      @aburkett44 5 ปีที่แล้ว

      Alexander Fawaz centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

  • @williamdolan2673
    @williamdolan2673 5 ปีที่แล้ว

    Dang, should've jumped on this last October when Bill was releasing it.
    It doesn't look like they're making the TQ bracket anymore.

    • @aburkett44
      @aburkett44 5 ปีที่แล้ว +2

      William Dolan centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

  • @RICEY702
    @RICEY702 6 ปีที่แล้ว

    If only these were back in stock

    • @saiyanneo469
      @saiyanneo469 5 ปีที่แล้ว

      They're back in stock.

  • @Moistnsquishy
    @Moistnsquishy 3 ปีที่แล้ว

    Lol 30 inch waist is little?

  • @SubieDash
    @SubieDash 6 ปีที่แล้ว

    Never in stock :(