Hi, I have several questions about using Octopus: 1. At 11:43, you selected "Pareto front", while at 12:17, it shows "Elite" was used instead of "Pareto front" 2. How long it took to finish the optimization? I have been running the optimization for more than 5 hrs, it's still searching. 3. Could you show me a complete setting in Octopus? Thank you
Hello! I've got a problem at Analysis node (7:30), I've checked so many times and can't understand where is a discrepancy Node is orange and writes: "1. There are 22 rigid body modes in the system. This means some parts can move freely without causing deformation. Try to use the 'Eigen Modes'-component and activate the display of local coordinate axes: The first eigen-mode will be the rigid body motion. If this does not help, check whether you have a pinned support directly attached to a hinge. A hinge introduces an extra node which may cause the problem. When analyzing a flat shell structure one has to lock the rotation perpendicular to the plate in at least one node." Does anybody have an idea what's wrong? Thanks for your great work! ❤❤❤
Hi! Thanks for you question. Although it's hard to say what you can do without looking at the script. Please send me your .gh file. computate.design@gmail.com
@@computate.d9140Hello, I have the exact same issue. Could you please help if I can send you my .gh file ? Or If you figured out what was the problem please share with us how you solved it. Thank you for your amazing work !
Amazing bro
Can we see your script to Download it?
Hi,
I have several questions about using Octopus:
1. At 11:43, you selected "Pareto front", while at 12:17, it shows "Elite" was used instead of "Pareto front"
2. How long it took to finish the optimization? I have been running the optimization for more than 5 hrs, it's still searching.
3. Could you show me a complete setting in Octopus?
Thank you
how did you get on with the analysis? any chance you could share your file?
Hello! I've got a problem at Analysis node (7:30), I've checked so many times and can't understand where is a discrepancy
Node is orange and writes:
"1. There are 22 rigid body modes in the system. This means some parts can move freely without causing deformation.
Try to use the 'Eigen Modes'-component and activate the display of local coordinate axes: The first eigen-mode will be the rigid body motion.
If this does not help, check whether you have a pinned support directly attached to a hinge. A hinge introduces an extra node which may cause the problem.
When analyzing a flat shell structure one has to lock the rotation perpendicular to the plate in at least one node."
Does anybody have an idea what's wrong?
Thanks for your great work! ❤❤❤
Hi! Thanks for you question. Although it's hard to say what you can do without looking at the script. Please send me your .gh file. computate.design@gmail.com
@@computate.d9140Hello, I have the exact same issue. Could you please help if I can send you my .gh file ? Or If you figured out what was the problem please share with us how you solved it.
Thank you for your amazing work !
Can I see your script?
10:00 What song is that? I like-it.
please give us the script