When define the perp frames, reparametrize the curve and graft the parameter t the beam sections don't arrange perpendicular to the points in the circle. All columns are not aligned radially in polar coordinates. I finished the whole process. It's precise.
I had the same problem, in the start of the script with the minus component you have to type -1, be wrote it so fast I missed it. (A-B) make sure its -1 , hope this helps. I was so frustrated.
Could be something I missed but some of the lines are randomly oriented after sweeping, the ones that run zrom top to bottom are perfectly fine, the rest are chaotic, any idea how we can unify the normals of the curves?
Hey Bart! Your videos are awesome! Thank you so much for your content. Would it be possible to make a tutorial on how you set up your grasshopper/rhino viewport (how the GH geometry (points, lines, ...) is displayed in the Rhino Viewport) Looks pretty sleek ;)
Hello, when I use entwine data and rectangles to generate points, repeated points will be generated and the line will be chaotic. May I ask which step of the operation data processing is wrong? Finally, thank you very much for sharing.
Hello! Thanks for your question. It is really hard for me to answer this questions without looking at your script. Please feel free to send over your script so I can have a look.
Hi, I'm having issues with Flip Curves & Perp Frame (12:20). For some reasons, it doesn't work and I can't figure out why. Here are the error messages : ". A closed curve cannot be compared to a linear guide" and "Perpendicular frame could not be solved" thank's
Hi Amandine, thanks for your comment and question. It is correct that closed curves cannot be compared to linear guide curves. But the curves should not be closed. They are either non closed planar or line like curves. Maybe you joined the curves? Feel free to send me your script so I can have a look for you.
Hello, I'm having trouble trying to project curves onto the joined brep (at 10:48)? The entwined curves only project onto one of the joined surfaces, the top flat one not the funnel surface. Any ideas why?
If you're on a PC, install this: www.food4rhino.com/en/app/tt-toolbox If you're on a mac, try this workaround, as the plugin is not currently supported: discourse.mcneel.com/t/sort-curves-along-curve-without-tt-toolbox-plugin/134073/3
If you dont have that plug-in u can sort the list like this; First get the mid point of the entwine curves then find the closest point on the curve at the bottom. When u sort the entwine curve list relative to the distance between these points u will get the same result
@@ebrukuru3408 Hello, could you tell me what command do you use? I'm having trouble find the the distance between these points.. :/ I'm quite new with grasshopper and don't know my mistake
Hello, I'm having a problem when I create the pattern and do the cull and entwine command right from the beginning of the script, the pattern is shifted and not centered, I completed the whole script knowing it wasn't going to work, can you help me with this please? I'm so confused.
It's okay I figured it out, in the beginning of the script when you wrote the minus (A-B) component, you typed -1 , I missed it coz you were so fast. It's the only way the cull pattern will be correct and centered. Thanks anyway, .
@@computate.d9140 Hey I'm having the same issue where the pattern isn't centred when I look at the cull pattern, I'm guessing there is something wrong with the script early on, could you take a look?
@@matthewbailey6192 Hey hi I’m also having the same issue where the pattern isn’t centred when I look at the cull pattern , have you found a solution for it , if found please let me know
I got to about the 8:00 mark before crashing and burning. My lines are going a bit haywire and aren't going in a radial fashion. The speed of the video is way too fast, and there is way too much jumping around from beginning to end of script -- nearly impossible to diagnose without starting over from scratch. I appreciate you taking the time to make this, but there's a million ways to get lost.
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](/img/tr.png)
![[TH] 2024 PMWC x EWC Group Stage Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/VnOqutfqWqU/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | คู่รักแซฟฟิก "หลิงหลิง - ออม" จากซีรีย์ "ใจซ่อนรัก"](http://i.ytimg.com/vi/zs8AfphGn2w/mqdefault.jpg)
Thanks for posting this
Great work BJ!
Thanks!!
Your works are amazing, keep going pls
Thanks a lot. Just oploaded a new video ;) Cheers!
I found that NGON's plugin CurveSort can be a good replacement for Sort curve to curve
Hi, I don’t have sort curves along curve, is there something I can use to replace it?
Hey, it is such an awesome video. I try to follow your tutorial but got stuck at 1:16 why i cannot draw diagonal line like the photo?
When define the perp frames, reparametrize the curve and graft the parameter t the beam sections don't arrange perpendicular to the points in the circle. All columns are not aligned radially in polar coordinates.
I finished the whole process. It's precise.
I had the same problem, in the start of the script with the minus component you have to type -1, be wrote it so fast I missed it.
(A-B) make sure its -1 , hope this helps. I was so frustrated.
there is anymore sort curves along crv node!! which one is instead?
no tengo sort curves along crv, alguien sabe cuál sería el reemplazo de Cg?
Could be something I missed but some of the lines are randomly oriented after sweeping, the ones that run zrom top to bottom are perfectly fine, the rest are chaotic, any idea how we can unify the normals of the curves?
Hey Bart!
Your videos are awesome! Thank you so much for your content.
Would it be possible to make a tutorial on how you set up your grasshopper/rhino viewport (how the GH geometry (points, lines, ...) is displayed in the Rhino Viewport)
Looks pretty sleek ;)
Thanks! I will think about such a video. Stay tuned!
@@computate.d9140 your Rhino viewport is really cool! Also keen to see your tutorial on that! Great tutorials every time, please keep it up!
Hi @Gerald Mandevhana, check out my new video. Cheers!
I need these forms in the sketchup program, can you help me?
Do u know how to do the G code for this?
Hello, when I use entwine data and rectangles to generate points, repeated points will be generated and the line will be chaotic. May I ask which step of the operation data processing is wrong? Finally, thank you very much for sharing.
Hello! Thanks for your question. It is really hard for me to answer this questions without looking at your script. Please feel free to send over your script so I can have a look.
Hi, I'm having issues with Flip Curves & Perp Frame (12:20). For some reasons, it doesn't work and I can't figure out why. Here are the error messages : ". A closed curve cannot be compared to a linear guide" and "Perpendicular frame could not be solved"
thank's
Hi Amandine, thanks for your comment and question. It is correct that closed curves cannot be compared to linear guide curves. But the curves should not be closed. They are either non closed planar or line like curves. Maybe you joined the curves? Feel free to send me your script so I can have a look for you.
Hello, I'm having trouble trying to project curves onto the joined brep (at 10:48)? The entwined curves only project onto one of the joined surfaces, the top flat one not the funnel surface. Any ideas why?
Try increasing the ‘absolute tolerance’ of units in Rhino settings so that the two surfaces will join correctly using Brep Join
@Ellen Lau thank you , it worked !
@Ellen Lau hey ellen, what list did you unflatten?
hey! cant seem to find the "set curve along crv" component, does anyone know what I'm doing wrong??
If you're on a PC, install this: www.food4rhino.com/en/app/tt-toolbox
If you're on a mac, try this workaround, as the plugin is not currently supported: discourse.mcneel.com/t/sort-curves-along-curve-without-tt-toolbox-plugin/134073/3
Alguien sabe por qué no me sale el "13ms" debajo de Division ????
Hi, You can turn on the profiler through the display menu in Grasshopper
HELLO could you tell me what the plug-in do you used I cant find the "sort curves along crv" battary
Hello! I used TT Toolbox pluging (by Thornton Tomasetti). You can download this plugin on www.food4rhino.com/en
If you dont have that plug-in u can sort the list like this;
First get the mid point of the entwine curves then find the closest point on the curve at the bottom. When u sort the entwine curve list relative to the distance between these points u will get the same result
@@ebrukuru3408 That's a great method too. Thanks!
@@ebrukuru3408 Hello, could you tell me what command do you use? I'm having trouble find the the distance between these points.. :/ I'm quite new with grasshopper and don't know my mistake
I am having issues with the "sort curves along crv" section. Have any workarounds as Rhino 7 does not have that container?
Hi! Sort curves along crv is part of TT Toolbox pluging you can download for grasshopper. www.food4rhino.com/en/app/tt-toolbox
@@computate.d9140 hi it only for rhino 5 i cant use it with 7.. can u help me here?
@@randsafaaaldeen4742 It should work with Rhino 7 as well. Have you tried to reinstall the TT Toolbox plugin?
@@computate.d9140 hi, I downloaded the new release tttoolbox ,but still not work .the sort curve along curve component didn’t show in tab
I need these models in Sketchup, can you help me?
Haha 12:57 "woops"
Wish I could resolve my mistakes in Grasshopper so simply
It comes with practise! Just keep making "woops' mistakes, and you will resolve faster and faster. Goodluck
Hello, I'm having a problem when I create the pattern and do the cull and entwine command right from the beginning of the script, the pattern is shifted and not centered, I completed the whole script knowing it wasn't going to work, can you help me with this please? I'm so confused.
Hi Lexi, please send me your script. computate.design@gmail.com
It's okay I figured it out, in the beginning of the script when you wrote the minus (A-B) component, you typed -1 , I missed it coz you were so fast. It's the only way the cull pattern will be correct and centered. Thanks anyway, .
@@computate.d9140 Hey I'm having the same issue where the pattern isn't centred when I look at the cull pattern, I'm guessing there is something wrong with the script early on, could you take a look?
@@matthewbailey6192 Hey hi I’m also having the same issue where the pattern isn’t centred when I look at the cull pattern , have you found a solution for it , if found please let me know
I have so much to learn 😰
I got to about the 8:00 mark before crashing and burning. My lines are going a bit haywire and aren't going in a radial fashion. The speed of the video is way too fast, and there is way too much jumping around from beginning to end of script -- nearly impossible to diagnose without starting over from scratch. I appreciate you taking the time to make this, but there's a million ways to get lost.
These columns are not structural, or am I missing something!?
I believe they are. Structural or not, this video explains how to create such colums.
@@computate.d9140 Excellent work, Thank you for the video!