excellent video nokia 7.1 screens What type of screen is it? lcd or ips Excellent quality screen device, best amoled, oled and poled screens. It has motorola Edge 30 fusion I hate amoled screen. i prefer to use nokia 7.1 soft screen
Would be great to see how to replace the fingeprint sensor and camera if you need to replace the battery cover (which broke while operning in my case, I bought a new one and now I am stuck how to replace the camera and fingerprint sensor on backcover)
Hi, I guess, it has a chance to do it wrong and break the display, but if you put the phone on a soft surface, the chance to break the display goes to 0. You know, you will open the back cover, remove the middle cover, and will see the sub-board with a charging port. My point is there is no connection with the display. No, of course, you can pry the sub-board up so hard that break the display from inside. Do it carefully that's all.
How I put SIM card in ??
Hi and thanks for the video, please could you tell me how much of the phone I need to dismantle just to replace the battery.
Thank you.
Andy.
I want to LCD connector for Nokia 7.1
excellent video
nokia 7.1 screens
What type of screen is it?
lcd or ips
Excellent quality screen device, best amoled, oled and poled screens.
It has motorola Edge 30 fusion I hate amoled screen.
i prefer to use nokia 7.1 soft screen
Do you a video about replacing SIM card Reader for Nokia 7.1?
Hi, we do not have such a video, this is quite complicated repair, you need a soldering station and a lot of skills.
@@Vrm24com ok, I thoutgh so. Unfortunately one sim reader is working the other one got damaged because dropped in water. Thanks for your feedback
To put a SIM card in this phone. Why do I need soldering gun ????
Where is the gyroscope sensor located? Is it possible to get it replaced?
how to replace broken screen?
Would be great to see how to replace the fingeprint sensor and camera if you need to replace the battery cover (which broke while operning in my case, I bought a new one and now I am stuck how to replace the camera and fingerprint sensor on backcover)
what if we dont have heat gun?
Hi, better to go to a specialist or you can use sandbag warmed in microwave oven or a hairdryer
Use a hair dryer
@@abitrubbish i didnt have heat gun so i used clothes iron
@@Vrm24com I replaced charging port(i mean complete charging pcb) and now mobile is discharging when connected to charger?
Hi!
A technician told me there was a risk of damaging the screen during the replacement of the USB-C port.
Do you confirm it?
How tricky is it?
Cheers
Hi, I guess, it has a chance to do it wrong and break the display, but if you put the phone on a soft surface, the chance to break the display goes to 0. You know, you will open the back cover, remove the middle cover, and will see the sub-board with a charging port. My point is there is no connection with the display. No, of course, you can pry the sub-board up so hard that break the display from inside. Do it carefully that's all.
@@Vrm24com Waaoww!
Thanks a lot. Shall tell that to the technician then. He probably isn't a Nokia specialist and I know nothing.
Thanks again 🙂
thanks a lot for your help
You are welcome!!!
Is the battery glued in place or easy replaceable?
Ibrahim Hassan it is glued but you can get it out if you’re careful. A new on is cheap on eBay.
I have a loose charging port. How does one replace this? What do i need? Which charging port do i change?
Saaaame !!
Rate
Super cool
I used a T5
Tem nokia 7.1