Thanks. I am contemplating the WRX S4 bezels for my base trim. Since I want to keep the OE turn indicator, I just need the led DRL strip. I might even use the opportunity to add fogs to my base 'while I'm in there'. This video helped answer a few questions. Cheers.
very cool! i think its suppose to show front camera when you put it into 1st 🤷♂️, the enter button i think comes as a view/enter. been looking for videos for the jdm bezels for the 18 up models, thank you
We have this standar din Australia also with the side mirror camera. Yes you have to push Enter to make it come on and its only really for parking (not whilst driving)
Thanks for this video! I've got the camera and harness and about to install this soon. Had a question though about the screws. The camera has holes for three screws but seems theres only one already in the bumper and no screws were packaged with the camera. Did find those screws somewhere or just had a few lying around?
...sure, you can always cut wires, strip the insulation back and then crimp or solder the wires together. A much more involved process. The t-taps just eliminate the splicing/crimping/soldering. It all depends on your ability or preference.
Great video, this same system works for a full equipment 2019 forester model, and where you can get that type of camera, which can be connected to the harness that you recommend in another comment, thanks for your help.
I never knew there is a front camera! I am totally thinking of doing it. However, I can't seem to find the harness for the front camera. Do you have a link?
I don't have any pictures of that, sorry. but I just found areas within the bumper itself and guided the wire away from the radiator into the battery compartment area.
It’s awesome but why need a front camera when the front windshield if right there. Just look right out the windshield why look at a 4 in screen when you have a four foot windshield. Unless it’s able to record. Then it could make it worth the install
....when pulling forward in to a parking space (or drive) it can help with judging distance to the curb/barrier/wall so that you don't rip off your front spoiler/splitter.
@@SonikJesus I don't have my VA anymore but if I remember right, it's the same way (press down and hold). To activate the camera is to press and release.
Horrible video I was trying to follow along with the installment but you fast foward in some parts that i'm very confused about because I COULDN'T FOLLOW ALONG BECAUSE THE PLAYBACK WAS TOOOOO FAST!!!!
I had no idea a front camera even existed! That is freaking awesome 👍
Thanks. I am contemplating the WRX S4 bezels for my base trim. Since I want to keep the OE turn indicator, I just need the led DRL strip. I might even use the opportunity to add fogs to my base 'while I'm in there'. This video helped answer a few questions. Cheers.
Hey did you ever find where you can buy just the led drl strip?
very cool! i think its suppose to show front camera when you put it into 1st 🤷♂️, the enter button i think comes as a view/enter. been looking for videos for the jdm bezels for the 18 up models, thank you
This is very nice :)
We have this standar din Australia also with the side mirror camera. Yes you have to push Enter to make it come on and its only really for parking (not whilst driving)
Nice you should do the foldable mirrors next
I was considering it but I would loose my blind spot monitoring light. Still deciding..
Clean !! How bout that Highlander next ??
Nice car bro
That is neat! Can you please post the link to the harness?
www.ebay.com/itm/Subaru-2018-WRX-Front-View-Monitor-T-Harness-for-cars-with-LED-SRH/264608118564?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160811114145%26meid%3D65a4b687310b4319b2288bd8814ac788%26pid%3D100667%26rk%3D2%26rkt%3D8%26mehot%3Dag%26sd%3D283883505316%26itm%3D264608118564%26pmt%3D0%26noa%3D1%26pg%3D2334524&_trksid=p2334524.c100667.m2042
@@andrewwickersham1523 thank you!!🤗
👍
Hah I just saw your license plate. I have a 19' Lapis Blue STI and live in Middletown.
Nice mods.
Thanks for this video! I've got the camera and harness and about to install this soon. Had a question though about the screws. The camera has holes for three screws but seems theres only one already in the bumper and no screws were packaged with the camera. Did find those screws somewhere or just had a few lying around?
Sorry for the late reply, but yes I went to the hardware store and picked up a few more screws. Bummer it didn’t come with the amount needed.
Cool vid!! Do you have a link for the Jdm daytime running light? Thanks
Here is a link but says they are out of stock right now.
www.subispeed.com/part/h4517va-kit-subaru-2018-jdm-drl-bezels-2018-wrx-2018-sti#.Yi3ajWQpDDs
@@wickinsti8618 Trance song?
Please and Thank you 🙏
How do you feel about the DRL fogs? Do you think they add to visibility when driving at night?
It doesn't add much visibility. I just got them overall for looks.
are these oem DRLs serve as sequential turn signals also?
this video was really helpful thank you. But is there any way to wire instead of using the T-Taps?
...sure, you can always cut wires, strip the insulation back and then crimp or solder the wires together. A much more involved process. The t-taps just eliminate the splicing/crimping/soldering. It all depends on your ability or preference.
Great video, this same system works for a full equipment 2019 forester model, and where you can get that type of camera, which can be connected to the harness that you recommend in another comment, thanks for your help.
Also would like to know
I'm really not sure. But, I'm thinking if it does have the piece that comes out where the camera goes, I would think it would work. Just not sure 100%
HI! 9:57 What is the name of the socket and where did you buy it? Thank you
By any chance did you find this harness?
Which horns did you get? I have the same car. Thinking about getting hella horns but want it to match my brakes…
Did you paint your horns?
Sorry for the late reply.
I didn’t paint them to match but you can buy the matching ones from
Subimods.com where I got mine from.
Do you think the camera portion of this video might also work for a Crosstrek?
Maybe, does the front grill have the plastic piece that comes out?
Yes it does.
could you also send the link to the oem camera thank you so much.
how do you reset the boost gauge?
Instead of a quick single press, you hold the Enter button for 2 seconds and the option to reset the max psi will show.
Man I want to do a 2018 headlight swap/a 2018 front bumper/ a bezel and a front bumper camera to my 2016 sti. U think it's possible ?
Do you have the 15'-18'? if so it is possible.
Name of the trance song? Thanks
I never knew there is a front camera! I am totally thinking of doing it. However, I can't seem to find the harness for the front camera. Do you have a link?
I just bought myself a set. Here's where I ordered the harness from: smyperformance.com/front-view-camera-monitor-t-harness-2018-2021-wrx-sti.html
@@MackCruz Ahh, thanks man!! I also found a pack one in that site!
How did you get it so that the camera turns on its own?
Hit the ‘Enter’ button and it comes on automatically. Lasts for a minute.
i bought the same parts for the camera. how did u route the wire to connect it? any pictures?
I don't have any pictures of that, sorry. but I just found areas within the bumper itself and guided the wire away from the radiator into the battery compartment area.
It’s awesome but why need a front camera when the front windshield if right there. Just look right out the windshield why look at a 4 in screen when you have a four foot windshield. Unless it’s able to record. Then it could make it worth the install
....when pulling forward in to a parking space (or drive) it can help with judging distance to the curb/barrier/wall so that you don't rip off your front spoiler/splitter.
thought it was pretty obvious why you would want a front camera pointing down low.
Do you lose the ability to reset your boost gauge if every time you press enter the camera comes on?
I installed it on mine and you can still reset the boost gauge.
@@MackCruzHow do you do it if pushing enter activates the camera?
@@SonikJesus I don't have my VA anymore but if I remember right, it's the same way (press down and hold). To activate the camera is to press and release.
@@SonikJesus It either times out, or you can push the button again and it will go back to the main menu.
Camera link?
only for models with steering guided led lights btw anyone looking into to this...
Horrible video I was trying to follow along with the installment but you fast foward in some parts that i'm very confused about because I COULDN'T FOLLOW ALONG BECAUSE THE PLAYBACK WAS TOOOOO FAST!!!!
Sorry about the speed on the fast forwarding. 1st time making a install video. I'll try better next time.