For everybody asking for rotary content...we don’t have any yet but we are going to be using the Italian racing frame as a base for the rotary shifter! Any recommendations for a good color combo?
Burning that clutch up buddy not letting stay engaged/disengaged long enough its just stop go stop go and a bunch of turning around, i love the video and content but that thing is for a track guys, glad you selling it go ahead and make a offroad buggy
Awesome, get a pipe and lectron carb on that thing and it will definitely be moving. Also you need to move that seat way back brother! Great content as always
Putting the correct TUNED airbox back on it (or a new one) would do wonders - there was a reason it was shaped strange and had all those purposely designed ports and weird holes......... a pod filter will never work right on that engine- Two strokes dont like that kind of Jerry-rigging
I Love your 'Intro vid',but maybe throw in that lightning strike too.Wow,That cart Rips!(Your nickname should be 'Titan',as in nards of steel, rippin like that)
That’s make me think about a clutch problem I’m not a kart expert but maybe you need to check if the clutch still too Much engaged I don’t know, maybe someone more pro can help you better here! SORRY for my English bro if it’s bad It’s not my language😅😂
Nice vid but I don’t understand why u would fit the motor into a x1 arrow chassis I’m sure it would be to small PS: haven’t watched the vid yet just watched the beginning
Oh Snap ! The Rotary has found it's New purpose I'm pretty stoked guys I am the one who said I'd like to have it 4 the ice bear but a Shifter cart is gonna be even more bitching...🤘🤘✌
The thing looks like a 50cc kids moped, I've driven a 125cc shifter behind a 100cc single gear racing kart and couldnt pass because those things actually are super quick. Something is either very wrong with this one or its restricted to 5hp :)
Super short gearing and it is likely in need of a rebuild. Also, the KT 100 is basically the lowest HP 2-stroke class making around 15hp on a good day.
Build Break Repeat great job guys.... just a thought pertaining to safety. Y’all might consider adapting a timing belt for drive instead of the commonly used chain. The reason for that conversation would be elimination of a broken chain at high speeds which acts like a chain saw blade that will literally go to the bone... not pretty plus very painful. Oh and as you guys already know that a smaller gear on the axle makes for less speed. :-)
I beg to differ but a huge sprocket on rear will raise the gearing ratio making the engine turning the wheel easier and there for making it rev faster so small gear makes more speed
For everybody asking for rotary content...we don’t have any yet but we are going to be using the Italian racing frame as a base for the rotary shifter!
Any recommendations for a good color combo?
Red and white with black pinstripes! 👌🏻
Haan's rx7 orange and black
Rossi color
Send it stickers every wear
Black and red! It'd look meean.
This looks like a great circuit. You guys should bring some builds down for a race
Sweet , you cab really here where the kart makes its power with the powerband
Barley even watched the vid yet but I know it's gonna be good. Love the vids with the two stokes!
Burning that clutch up buddy not letting stay engaged/disengaged long enough its just stop go stop go and a bunch of turning around, i love the video and content but that thing is for a track guys, glad you selling it go ahead and make a offroad buggy
Looking forward to the rotary engine go-kart. That has the potential to be an epic project.
Another banger video
Most under raited youtuber ever damn
Love your vids ❤
You guys seriously need to have some kind of event at the track
I love that gokart.Im looking to buy one to add to my collection of go karts.
How much are you guys selling the KT100 cart for?
Amazing kart
Excellent work. Greetings from Slovenia 😎🍻
Cool go cart
man it would be so nice to find an old yamaha 400 RD engine !! they sound amazing and revs really high !
MrPafleouf Yeah man that or like a cr500, even if I could just get my hands on a bottom end and build that it would be such a badass kart.
Was there any difference in that air filter that you noticed?
Awesome!
Nice weather you had there.
Awesome, get a pipe and lectron carb on that thing and it will definitely be moving. Also you need to move that seat way back brother! Great content as always
The lightning is cool
That is a racing clutch so the engagement rpm sgould be adjustable. Sounds like its engaging at too low rpm
Intro song?
Putting the correct TUNED airbox back on it (or a new one) would do wonders - there was a reason it was shaped strange and had all those purposely designed ports and weird holes......... a pod filter will never work right on that engine- Two strokes dont like that kind of Jerry-rigging
Might wanna think of getting back tires lol not cadet front on the back and junior front on the front
Way to go! #thumbsup
I Love your 'Intro vid',but maybe throw in that lightning strike too.Wow,That cart Rips!(Your nickname should be 'Titan',as in nards of steel, rippin like that)
Need to lean it out a bit you'll get higher rpms not to much just where you get sputtering sound at wide open
Matthew Anderson This^^^
I stopped watching game of thrones for this and my hopes are high
Sam ur Boi wow I’ve never been so honored by a comment
What song do you guys use on your intro? Been meaning to ask for a while I like it!
That's me comin round the corner running from the cops
No hate at all but watching you take the same corner for 3 minutes wasn’t the most entertaining thing, but cool video.
Lmfaoo stop hating 😂😂
A helmet with no leathers?
How much HP??
how will it sale for?
Would a predator engine fit in one of these?
Yes
Paint it orange with black stripes 👍
I have a kt100 as well and it works perfectly, but when I put it on the floor it stops running and it doesn't starts rolling.
Does anybody know why?
That’s make me think about a clutch problem
I’m not a kart expert but maybe you need to check if the clutch still too Much engaged I don’t know, maybe someone more pro can help you better here! SORRY for my English bro if it’s bad It’s not my language😅😂
The lightning though 😭
How much ?
Would have been cool to see that motor on a mini bike, even if it was only just for the lawls... Lol
OpposingForces I’m actually looking for something like a kt100 to throw on a mini bike. Would be a pretty cool project.
@@BuildBreakRepeat or a vintage two stroke like a westbend 820 or a McCulloch would be sweet!
Make a diesel cart!
Facts
Nice vid but I don’t understand why u would fit the motor into a x1 arrow chassis I’m sure it would be to small
PS: haven’t watched the vid yet just watched the beginning
You guys gotta get to a track
Oh Snap ! The Rotary has found it's New purpose I'm pretty stoked guys I am the one who said I'd like to have it 4 the ice bear but a Shifter cart is gonna be even more bitching...🤘🤘✌
The thing looks like a 50cc kids moped, I've driven a 125cc shifter behind a 100cc single gear racing kart and couldnt pass because those things actually are super quick. Something is either very wrong with this one or its restricted to 5hp :)
Super short gearing and it is likely in need of a rebuild. Also, the KT 100 is basically the lowest HP 2-stroke class making around 15hp on a good day.
I wanna buy it
Still need a smaller gear in rear
crowbar2004 Yeah if we were going for a full build on this one I would definitely gear it for more speed.
Build Break Repeat great job guys.... just a thought pertaining to safety. Y’all might consider adapting a timing belt for drive instead of the commonly used chain. The reason for that conversation would be elimination of a broken chain at high speeds which acts like a chain saw blade that will literally go to the bone... not pretty plus very painful. Oh and as you guys already know that a smaller gear on the axle makes for less speed. :-)
I beg to differ but a huge sprocket on rear will raise the gearing ratio making the engine turning the wheel easier and there for making it rev faster so small gear makes more speed
The rotary cart has gotta be a 787b livery
that thing would be scary fast with a pipe
Time to put a turbo on it!!! lol....
Just realized there are 2 biondis 😂😂
Way to reschedule boys
RIP Andrew Lee ;(
If the gears were lower you would be drifting all day
Tune it and get a proper exhaust not a tincan
It's not running as good as it should
Dude please change the intro music. Its absolutely HORRIBLE
Your to big for that kart
WTF,,,, children gokart?