2014 traverse heater hose cheap quick fix

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • SHOT THE VIDEO ONCE SO MORE SPOTTY THAN USUAL.
    went to the parts store and was told the heater hose with the quick disconnect was part of an assembly that would be 144 or 160 plus tax. had some heater hose and a clamp left over from the Z. so 20 minutes later I was on the road again headed north.

ความคิดเห็น • 21

  • @ethansnow483
    @ethansnow483 8 หลายเดือนก่อน +2

    Damn mine just blew going down the highway thanks for the vid

  • @about2088
    @about2088 11 ชั่วโมงที่ผ่านมา

    Thanks for the video. This just happened to me today

    • @MrMK211516
      @MrMK211516  8 ชั่วโมงที่ผ่านมา

      Glad it helped. Couple of bucks, and some coolant.

    • @about2088
      @about2088 5 ชั่วโมงที่ผ่านมา

      @@MrMK211516 update. Car still overheated. Going to look into the heater core or thermostat now. Wish me luck 🍀

  • @michael84003
    @michael84003 ปีที่แล้ว

    exact break for me too. IN 2023 on a 2014 GMC Acadia. Now I just need to figure out the "quick" disconnect. Quick for manufacturing.....not for me.

    • @MrMK211516
      @MrMK211516  ปีที่แล้ว

      Just break it off. You don't need it anymore. Just be careful with the aluminum pipe not to bend or score it too bad.

  • @jesset6574
    @jesset6574 2 ปีที่แล้ว +2

    What’s the part number of the hoses ?

    • @mikemartinez604
      @mikemartinez604 ปีที่แล้ว

      I used an Autozone 50277 flexible heater hose 3/4inch.

  • @emmasdad5426
    @emmasdad5426 11 หลายเดือนก่อน

    I was going to do this but when I pulled the hose from the “T” well the “T” broke. Tried to remove it and it broke in all three hoses.not sure what to use as a replacement t.

    • @MrMK211516
      @MrMK211516  11 หลายเดือนก่อน

      Parts store has a generic wall with 5/8 T fitting. You can also ask the guy at the counter. Sometimes, they'll have them behind the counter visible. Good luck.

    • @MrMK211516
      @MrMK211516  11 หลายเดือนก่อน +1

      Also, use razor to cut the old hose. Just be careful.

    • @dznuttzonyachin7499
      @dznuttzonyachin7499 10 หลายเดือนก่อน

      If you have time locate a metal 5/8 Tee fitting from parts store .. or order one
      Otherwise generic platic Tee 5/8 will do ..5/8 all three sides dont forget

  • @jesset6574
    @jesset6574 2 ปีที่แล้ว

    $160 sounds like a warranty and guarantee not blowing under pressure these cars need oem parts they don’t function like the older vechile bro.

    • @MrMK211516
      @MrMK211516  2 ปีที่แล้ว +2

      I'll take my chances being it's a year and haven't had any trouble

    • @jesset6574
      @jesset6574 2 ปีที่แล้ว +1

      @@MrMK211516 nice man mine has been a nightmare on these hoses and how everything is compact OMG mine blew and to the shop it went. Nice video man Especially during hard times you give us inspiration to go against GM fix it your self 👍

    • @lgphoneballard8946
      @lgphoneballard8946 ปีที่แล้ว

      lol

    • @wesdoobner7521
      @wesdoobner7521 ปีที่แล้ว

      Do you happen to work for GM by the way?

  • @Cr8azlifestyle
    @Cr8azlifestyle 3 ปีที่แล้ว

    Did it end up working in the long run ??

    • @MrMK211516
      @MrMK211516  3 ปีที่แล้ว +3

      It's still working as of today. Took it up the mountains and back that day.

    • @Cr8azlifestyle
      @Cr8azlifestyle 3 ปีที่แล้ว

      Ok sounds good I’m about to do the same hose ended up busting by any chance you have to change your heater core I got the same 2014 traverse

    • @MrMK211516
      @MrMK211516  3 ปีที่แล้ว +2

      @@Cr8azlifestyle No, I just did the hose. Unless the heater core is leaking too you don't need to replace.