YOU ARE THE FUCKING MAN!!! You definitely gained me as a subscriber! Geeeeez, I can't tell you how many days I wasted before I found your video. Thanks a ton for the help!
I’m lost where you extract the files and then go to local c and put the files in the xhorse folder I don’t have a total video converter folder in mines
Dear, no need to get confused. You need to follow the steps. If you still face the problem, let me know. I will try to share the paths. But i also have to watch the video, as i made it long time ago.
Did everything step by step but it just freezes at the initializing USB communication. Says I'm missing ftd2xx file but idk where that supposed to be. Also the firmware update tool didn't do anything
@@SyedAliPT ok i brought the computer back to a better state, im now at the driver stage again. So I got it working but couldn't get it working entirely using these instructions, I had to use an extra step to make the vim show up on the vim selection list cus the driver wizard always prematurely fails. You also don't have that setup file in your Dropbox btw.
@@SyedAliPT that’s ok, I actually downloaded a virtual image of a Win7 computer that had tech stream successfully installed and configured. Very simple but thank you for the reply I appreciate it!
put a link with the mvci files for download. there is no where on internet do download it, don't say google it because there is nowhere to be found, I see that you have the files, so put them in a folder and put a link to download them...thanks
@@chetrampersaud6810 please follow the exact procedure. I have discussed every step. If you still get error, may be its the device that is not working.
@@SyedAliPT i already had the software installed and it was working fine ,then it stop working saying vim error. I followed your steps and I am still getting the error. I may Uninstall it and follow your steps again
Recently i setup operation system Win7 ultimate 64 which contains x86 folder.. is there need any others software to install for that? Techstream v12.20.024
I am sharing the MVCI Driver link, just open the link and download it and extract using winrar or any other extraction software. Link Updated on 4th may 2023. mega.nz/folder/MxE3kZBI#25cKh8Y6cw6k1vN_yJQMgw
I had the same issue with my IS350. This solution worked for me, thank you my friend!
Excellent didn’t expect it will work but did worked just fine
Thank you so much 👍
I am very happy you made this manual for us ;) thank you
Thank you bro.
Why do i have only ‘TIS Techstream VIM’ in the interface setup??? Setup > VIM Select.
I’m using win7 with 64 bit, is that ok??
Thank you! This video was a huge help
Welcome Brother
YOU ARE THE FUCKING MAN!!! You definitely gained me as a subscriber! Geeeeez, I can't tell you how many days I wasted before I found your video. Thanks a ton for the help!
Bravo sir, you are the best!
Thank you !
Thanks man, great work !
Thank you so much! Worked for me
You're welcome!
Thank you sir I am a big fan now
Thank you Bro.
I’m lost where you extract the files and then go to local c and put the files in the xhorse folder I don’t have a total video converter folder in mines
Dear, no need to get confused. You need to follow the steps. If you still face the problem, let me know. I will try to share the paths. But i also have to watch the video, as i made it long time ago.
Did everything step by step but it just freezes at the initializing USB communication. Says I'm missing ftd2xx file but idk where that supposed to be. Also the firmware update tool didn't do anything
You must be doing something wrong dear. It works 100%
@@SyedAliPT why would the firmware update tool that I downloaded did not do anything
@@ns671fr it just shows whether the tool is connected or not.
@@SyedAliPT ok i brought the computer back to a better state, im now at the driver stage again. So I got it working but couldn't get it working entirely using these instructions, I had to use an extra step to make the vim show up on the vim selection list cus the driver wizard always prematurely fails. You also don't have that setup file in your Dropbox btw.
@@ns671fr There is no virus in that dear. If you think it has virus, download the files from internet anywhere else.
The dropbox link didn't work. Can you please provide the working link? Thank you!
Hey are you able to re-upload the file to Dropbox? The current link in the description no longer works
I am not at my hometown. If i were, i could do that. You can easily download the driver from internet for free.
@@SyedAliPT that’s ok, I actually downloaded a virtual image of a Win7 computer that had tech stream successfully installed and configured. Very simple but thank you for the reply I appreciate it!
Dear, I have the same error, followed all your steps. Still not working
My dear honestly i hace used it myself, alot of other users have verified this also. You must be missing something.
Putting a 0 in the it3system doesn't do anything. It still asks for a key
There must be something wrong then bro.
Thank you man, that was exactly what I needed. Can you explain why this was an issue for so many?
I think procedure is tricky.
@@SyedAliPT oh it’s definitely tricky
Great, Thanks you!
This software works on windows 10 64 bit? Thank you!
I’m having issues to install my USB to my computer to connect how can I do it
Bro you saved my life thanks!!.
Lexus is250
good so far, but video ends in middle of your important sentence about still getting the error... can you finish it?
Just copy that file and paste directly in C: Drive.
sir how can I get the mvci driver?
You can download it for free from internet.
HI, your link it's not working, please help
Search the files online. Its easy to download.
Doesn’t work for me windows 10 x64
I recommend you using Windows 7. Windows 10 or 8 might have other issues.
hi, how to vim select openport???
I made another video on this please see my video
@@SyedAliPT send me link
put a link with the mvci files for download. there is no where on internet do download it, don't say google it because there is nowhere to be found, I see that you have the files, so put them in a folder and put a link to download them...thanks
OK bro i will do it.
Sir i have som broblam i my teacstrem
What is the problem? Can you explain?
did all that but nope still cant connect to vim
There must be some mistake. You must see each and every part carefully
no mistakes carefully went though this many times @@SyedAliPT
@@RichieAustinMagician there can be problem with the windows or software or even hardware. Which car you want to scan ? Why not go for Torque app ?
i need techstream for programming key, i have now done it differently with a different version of techstream @@SyedAliPT
I am not getting this to wrk.
What's the problem ?
@@SyedAliPT i am still getting the vim error. When trying to connect
@@chetrampersaud6810 please follow the exact procedure. I have discussed every step.
If you still get error, may be its the device that is not working.
@@SyedAliPT i already had the software installed and it was working fine ,then it stop working saying vim error. I followed your steps and I am still getting the error. I may Uninstall it and follow your steps again
@@chetrampersaud6810 oK
I will pay you if you can do the techstream program on my laptop using TeamViewer
Sure, no problem.
Please contact at my Whatsapp +923315191713
Ok I'm write the whatsapp
Not working
My dear its completely working. Many people has also verified this. Please watch each step carefully.
@@SyedAliPT 😒😒😒 still not working bro , its showing no device connected on MVCI firmware tool and Techstream showing still vim not connect....😒😒😒
@@kawsarhamimsadik1601 What can i say except this that make sure your device is functional and you follow the steps.
Recently i setup operation system Win7 ultimate 64 which contains x86 folder.. is there need any others software to install for that? Techstream v12.20.024
@@kawsarhamimsadik1601 Yes u need MVCI driver as well.
I am sharing the MVCI Driver link, just open the link and download it and extract using winrar or any other extraction software. Link Updated on 4th may 2023.
mega.nz/folder/MxE3kZBI#25cKh8Y6cw6k1vN_yJQMgw
The link didn't worked! Can you please provide working link?
@@freeyourstress2752 oK i will share it again tomorrow.
@@freeyourstress2752
Here is the link. If you have any other issue, let me know.
mega.nz/folder/MxE3kZBI#25cKh8Y6cw6k1vN_yJQMgw
I'm more confused after watching this video.
Why is it so?
@@SyedAliPT Your video stops when you are explaining.