rubberband sus wall, the plastic sheet is there because we are planning to write our robot name on it soon. also the cubes sometimes fly out so that's there to stop them.
basically a piece thats attached to the shaft on our top roller (not that flipup) hits a piece that is attached to the flipup when it spins. when it hits the piece, it kicks up the top roller. we also have rubberband passive assistance to help the flipup go up
yes, but it gives us level 3 which makes up for it and ontop of that, that lets us fit more cubes inside of one bucket which overal nets us more points (this strategy s the only way to consistently get 165) samuel cheng has a video on it as well
you have to make sure that your intake is frictionless using washers. also chain transmission is better for long distances cuz less connections to worry about or you could just holecount 6699M like we did
@@KineticForceRobotics20235z So the frictionless we did on the inside but not the outside, we will do that. Also we only use gears on 1 side so it doesn't bind, so idk if that's the problem...
The classical music goes hard
copyright free bangers
Classy is w
gotta love the weather ending this event early >:( oh well good job on 164
it wasnt the weather
they were too slow
oh yea@@louiecao4690
@@louiecao4690 he's right
Good Job Bro😘😘😘
Cool robot best robot in existence 👏 👍 🙌 🤣 👌 😀 👏 👍
Bruh. Sucks that the winner got 161. ❤ From 95133F
we're not 95133c
Average 95133c +95133e finals match
yessirrrr
bottom text plus pizza kitchen=points
20 sec supply zone clear is crazy. What is the plastic sheet at the front for though? Also is it a plate sus wall or rubberband sus wall?
rubberband sus wall, the plastic sheet is there because we are planning to write our robot name on it soon. also the cubes sometimes fly out so that's there to stop them.
How do you make the top roller lift up at the start of the match and how to hold it down until you want it
basically a piece thats attached to the shaft on our top roller (not that flipup) hits a piece that is attached to the flipup when it spins. when it hits the piece, it kicks up the top roller. we also have rubberband passive assistance to help the flipup go up
@@KineticForceRobotics20235z thanks
Wait but on q97 there is a 90 degree beam do you add that on the shaft to lift up the 5th roller
Nice🎉
ty :)
cracked robo . but how does you intake spin so quickly and transfer the blocks to the elevator so quickly?
gear ratio.
bruh ic
@@Lee-squak so what are you asking 💀💀💀💀💀💀
like what is it specifically, do u use a pto?
@@Lee-squak yes
2:30 average magikid supply zone 💀 nice job yall
the supply zone was actually random
@@KineticForceRobotics20235z randomly rigged
@@pyre46168G 💀💀💀💀💀💀how do we rig a supply zone
Xd oh yeah that's because I practice Ever cube on the field in the supply zone and never bother to count
the tourment was scuffed af and their version of 'random' was just to put them all in@@apollo4582
What do you use for your ramp under your intake
pitching in slides "borrowed" from pitching in worlds
Do y’all use a pto system?
no. we used lots of washers tho
The robot is still 4:1 though
@@urmumsstepbro5362 we holecounted 6699M
Where did you find 6699M
Like 2 washers between each gear and 2by?
bruh
wr means WORLD record
its just for clickbait 💀💀💀💀💀💀
@@KineticForceRobotics20235z wild
Students are allowed to pick cubes off the field and put it in supply zone? I thought only refs were allowed to
i think students are allowed to as long as it goes back into the supply zone
ye they are allowed to, gogoboba does it all the time as well
As a ref students are allowed to place blocks back into the supply zone as long as they meet the requirements of being placed into the supply zone
Daaaamn u guys cracked but those are local record not world record lol
world record for local events
not world record in our area
also its just good clickbait lol
One question: why do you sometimes put both greens and purples in one bin? Doesn’t it get rid of color bonus?
yes, but it gives us level 3 which makes up for it and ontop of that, that lets us fit more cubes inside of one bucket which overal nets us more points (this strategy s the only way to consistently get 165) samuel cheng has a video on it as well
@@KineticForceRobotics20235z But don’t you have to get all three bins fill level 3 in order to get the 10 extra points?
@@Square-one123 yup, and that we did, thats why you see us dumping a little bit of cubes in each bucket to help our alliancce get fill level 3
Oh I see! Cool! I’m part of a mediocre team who made it to worlds so I was trying to gather strategic data lol@@KineticForceRobotics20235z
bro how is your spinner so fast with clusters? i mean ours is a 1:1 ratio but they still get clogged???
you have to make sure that your intake is frictionless using washers. also chain transmission is better for long distances cuz less connections to worry about or you could just holecount 6699M like we did
@@KineticForceRobotics20235z So the frictionless we did on the inside but not the outside, we will do that. Also we only use gears on 1 side so it doesn't bind, so idk if that's the problem...
@@SyntaxERRORRobotics wdym don't bind
@@KineticForceRobotics20235z don't have gears rub on plastic
@@SyntaxERRORRobotics you can try to change it ig
worlds reacp?
prolly not
alrr
Hate to burst your bubble but 2499H and 3211B beat your records
ye ik our record lasted for like 4 days
We will beat or tie them in regionals trust
isn’t that 163?
yea it is they counted wrong
@@KineticForceRobotics20235z yea. u won either way tho
def not
we will beat your team E a state ,lol
what team are you
you did not beat them at states 💀💀
this didn't age very well did it 💀💀💀💀💀💀