do u remember trying to holecount samuels bot? and figuring out pto, full park... how to have a fast clear... all those days building robots and helping each other. full volume is the goat, ill never forget the ppl i met and the experiences i had
I don’t think there will ever be another team like Samuel’s. Good videos, good at vex, open to sharing but not to open, Samuel is the best (sorry capped pin)
@@ultranoobthing I get that pto isn’t necessary but pneumatics might be because of full park, so far I’ve seen 2 ways to full park and using pneumatics is one of them
i was watching the video and i noticed that you have the intake wall on your lift mechanism. how does your lift not collapse in on itself? do you have any plates seperating them because i don’t see any.
Great job and lots of details! Thank you very much for sharing. Behind the intake, are you using shafts and mini standoff connectors to support the force of rubber bands? I don't have that many mini standoff connectors. Do you have any suggestions for replacements?
Nice bot how did you make it so the arm can easily enter over supply zone. We use the rubberbands and run into with the angled beams and its so hard to get it over
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
2:1 intake🙀! For a longlong time we thought your are using 3:1, since it is so fast.
Just insane friction control
It’s 3:1, sry we had a typo in the end
Lol
All our teams yesterday were like "wait maybe we should look at 2:1 instead of 3:1 since samuel did it!?!?!?!"
Where is the 3:1 gear ratio, I can’t see how it is 3:1
I’m calling it’ll be the most viewed reveal of all time. Samuel is easily the most influential team this season
i agree. bro has the best 2 motor intake lol. better than my 4m
@@ultranoobthing china motors??
@@madisoglrobotics nah he has a really good gaming chair
@@ultranoobthing mhm
ben lipper had more views on his reveal
This is really good keep up the good work we will see you at worlds
Those shocks at the edge of the intake are genius
anyboby like to explain what the shocks do exactly? to slow down when you get to an edge perhaps?
basically if u have non shocks and stiff things and run into somewthing, they most likely fall off, the shock prevents that
Thx a lot. We have been following your design for the whole season. Give the kids so many inspirations. Amazing details.
Thanks so much for making this my team and I got so much out of it. (Elevator was the thing that didn't work but we fixed it after this video).
nice
brings back memories
do u remember trying to holecount samuels bot? and figuring out pto, full park... how to have a fast clear... all those days building robots and helping each other. full volume is the goat, ill never forget the ppl i met and the experiences i had
@@Ultra-nl7mv yeah fr it was so fun. wish we could go back
Better than whatever the fuck this game is
@@madisoglrobotics rapid relay more like rapidly kill the game
u r rlly good this year
Eli 💀💀
I don’t think there will ever be another team like Samuel’s. Good videos, good at vex, open to sharing but not to open, Samuel is the best (sorry capped pin)
💀
@@figholl3266in my defense your robot doesn’t match up with your scores
@@madisoglrobotics?
@@figholl3266 42 skills
@@figholl3266 47 skill?
How does your intake work this smooth? Also my robot is smaller than yours and I need to change my battery every game. Do you need to do that?
Our intake is 3 to 1 gear ratio and no we do not need to change batterys every match, but we do still change it.
@@Samuel_Cheng ok thank you! Also how are you able to get both green and purple at the same time?
4 bar linkage, so the intake goes up to collect purple when it runs into it@@srishanthjakka416
w and bro loves his 2/1 ratios
time to holecount
fr
Nice reveal! Is there a specific reason you aren’t using 4 motor intake and lift yet or is it just because you aren’t using pneumatics?
he prob wants to show ppl that pneumatics isnt that op and hes gonna win worlds without pto
@@ultranoobthing I get that pto isn’t necessary but pneumatics might be because of full park, so far I’ve seen 2 ways to full park and using pneumatics is one of them
@@pyre46168G ive seen it
@@pyre46168G make a passive mechinism
We didn't have enough time to make our 4 m intake smooth enough so we used this robot to compete
i was watching the video and i noticed that you have the intake wall on your lift mechanism. how does your lift not collapse in on itself? do you have any plates seperating them because i don’t see any.
Standoffs
Or proabably stretched bands
@@hanokb123yeah, most likely. stretching rubber bands to be the perfect length is also very difficult.
how can you just run into a patch of four with 2m
Ur robot Is super good 👌
Great job and lots of details! Thank you very much for sharing. Behind the intake, are you using shafts and mini standoff connectors to support the force of rubber bands? I don't have that many mini standoff connectors. Do you have any suggestions for replacements?
Yes, he uses mini standoff connectors, but if you dont have that many you can use spacers
@@Team7676A Thank you.
Your robot looks pretty heavy, how does 2:1 drive work? Also are you rebuilding to PTO
watch and subscribe
how do you raise that?
I mean when you make the blocks into the goals
Linear Motion
elevator
Can you show a closeup on the lifter and the intake
Hi, just wanted to know, how did you make you basket? How did you make the angle?
Best reveal ever.
Hey Samuel, I am having trouble with my phase. can you reply and give some suggestions.Thanks
use bands
Where did you buy the part on the purple storage, the orange thingy in the middle of the storage. Send me the link
it's hexbug
@@Team7676A Can you send me the link, I cannot find it
People who think Samuel Chang is the goat
👇
.....
CAPPED PINS IS GOAT
thank you for sharing
Do you have any suggestions for a better intake? Currently my bot is kind of slow with the 3:1 but too weak with the 4:1.
If you want the cubes to go up fast, use 4 to 1, but if you don’t want it to jam, use 3 to 1
where did you get the orange pieces in the middle for your purple compartment?
what are all the gears that u guys used on the intake. Pls we need this.
r u gonna do a pto
yes
how many studs apart is your bottom roller and the floor?
YOOOO
Tag your it
hey huge fan will you make a vid where we can see your rubber band wall with the intake taken off because ours keeps exploding
Rotators can move up(we attached them w/ 1s), but not moving up when in contact with purple blocks. How to fix?
Use rubber bands to help pull the intake up
Can we get photos of the inside of the robot?
How did you make the intake so smooth?
3 to 1 gear ratio
yes, and then 1 to 1 chain@user-pl4ep9kc4n
how does your third roller spin so fast and strong with the small gears connecting it?
Amazing. I always thought that the system to make the elevator lift was very complex. It's basically just 2 pieces lol.
yea
Thank you btw how do you make you flywheel faster
use spacers if you haven't
@@Samuel_Cheng ok thx
How do you connect the standoffs that are on the green bucket
standoff connectors
How does your intake have so much speed and torque at the same time?😮😮😮😮
how to make your intake so good?
what gear ratio for the drivetrain?
2:1
@@Team7676A May I know the gear sizes? Thank you.🙏
24, 48, 36, 48, 24, the motor is on the 48 tooth@@lindama-z7t
yes it is, it doesnt have to cover the whole 2x20 beam@user-pl4ep9kc4n
@@Team7676AYou sure? It also looks to me like it’s a 12t gear, not a 36t.
how do i get the ramp edge peices
Haw did you make your purple dumping laconism?
Size wise do you guys know if a 40 tooth sprocket in vrc is bigger than a 40 tooth sprocket in vex iq.Also what size sprockets are u using😅
he's using 40 tooth sprockets for the first 3 rollers and 32 tooth sprockets on the top roller
非常棒的分享
Hi, how can I contact you?
How do you place the shock?
we use pins at the side and we use a connector to connect it in the end.
Absolute w
How do you have so little friction on the intake?
at 00:50 there is a vertical expansion (with rubbber bands)- not clear why? I presume after expanding it is still below 15". Amazing work BTW!
Helps the blocks from falling out the sides, especially when undergoing fast acceleration
@@connorm_3605 why not have it in the high position all the time?
Never mind... Probably would be higher than 15"
why do you attach the rubberband backwall to your outtake?
Wow
samuel W ngl
For your elevator, do you have the gear that spins the linear slide directly attached to the motor?
yes, he does
@@Team7676A thanks
@@srishanthjakka416 I gotchu -Noah
@@Team7676A I am subbed to you guys
@@srishanthjakka416 thanks so much! Helps us a ton! -Noah
What gears do you use for the drivetrain gearbox?
48 and 24
How long is your drive base ?
why is there a ziptie 0:50
Its a tag from an event showing that he passed inspection
.....5 wheels????
5 Omni wheels????
yea
@@Samuel_Cheng why???
@Samual_Chang how do you support you phase base from the inside
How did u do a 2:1 gear ratio for outtake
It looks like just one gear
Since it's a 24 tooth gear, it makes the linear travel almost 2 times faster, so it's basically 2:1 gear ratio
How did you make your lift 2:1
24 tooth gear instead of 12 tooth, basically makes it 2 times faster
Can I please have discord link, on other vids it says link expired
awsome guys
第五顆輪胎的效果如何
分散重量，可以防止孔
Why’s there a third Omni wheel?
Support probs
It's 5th but it's in the middle
@user-pl4ep9kc4n Where is the 5th wheel? I still cannot see it.
How is your 3:1 gear ratio so strong🤨😦
good tuning
Can you sent me a photo for the robot
how do you keep it so the 60 tooth gear touch
nvm
Nice bot how did you make it so the arm can easily enter over supply zone. We use the rubberbands and run into with the angled beams and its so hard to get it over
Spin intake when you go in@@Ninjacookie331
It is Swith's robot ?
I am the first comment!
you forgot to mention your modified motors :)
he doesn't have modify motors
@@vortex-eo1lb cap
lol, we don't even have a modify motors
Bros salty
discord link pls
Samuel cheng mind if i get your discord for questions
what rubber bands do you use for your intake?