This is by far the most comprehensive guide of the machine. I saw a ton of videos and they explain very little about the guides and the crimping at the back etc.
Well done for your great video. 2 things to highlight: 1.There is very good Reason for the back page being put on the top, this is to help prevent the pages from falling out as the Back page is then on the straight edge of the spine ( (Good to use something a bit thicker for the Back Page) 2. in order to stop the pages coming loose you can push each of the rungs manually so that they pass each other Push manually a little more than the machine closes them, but in order for this to work The Back page MUST be the last one you put on. So that the Back page stays on the back of the spine, which then guides the spine & gives every other page the ability to turn smoothly. Hope this Helps
So glad you talked about liking the spiral instead of the of the wires that go in the square holes. I was thinking I'd prefer the spiral like you used. I'm thinking of getting this. Your demonstration video is convincing me that this is the cincher I should buy. Thank you so much!~ Wish I could give you 100 thumbs up!
Thank you, thank you, thank you for this video. No other video that I watched told me what the marking meant to get perfect alignment. I appreciate this. I’ve been struggling to figure this out.
Thanks so much for this wonderful tutorial. I made the guide book, wat a great tip. Maybe I have a tip for you about removing the tray with punch outs. I frist remove the cartridge and then gently push the tray out from the insiders. That way the punch outs don’t fly everywhere . Best Regards, Mirande
Great informative introduction to the multi cinch! Thank you for sharing your discoveries. Your punch guide book is brilliant and helped me to understand how to make this tool work for me. Really good tutorial.
Thank you so much for your amazing and wonderful demo and review of the multi cinch I been looking at getting it and now have more of an idea of how it actually works lol😂.
You’re great at tutorials! I just found you and you explain and show everything so clearly. Your guide book is genius! I’m so happy I found you and can follow your channel to see all your creations!
Thank you so much for all of this great info! You did a fantastic job explaining and providing great tips! 😁 oh yes, and absolutely love the beautiful guide you created! I really need and want to make one! 😍
Hi, thank you for this detailed information! I am looking trying to decide if I want a 2nd hand gray & yellow Cinch & a multi or just one or the other…I am closer to deciding now. This will be my 1st time using these machines. New subscriber 😊
What a great video! It's more than just a tutorial; it's an intimate guide! I bought the larger Cinch in 2019 with plans to bind my custom baseball scorekeeping sheet into books, but then baseball season was delayed for months and in the meantime, I learned how to bind books with thread and I never got back to the coil project. I'd still like to give it a try, but I really wish I had this newer model with different cartitridge options and a smaller footprint! I probably will cave and pick up WRMK's book binding template tool-at least that will slide into a drawer.
I've found the more I use it the more I really love it. The bigger one is great for perfect hole placement and not to much thinking about it. I just picked up one and love it also. TFW ❤😊❤
What a great demo....thanks...I have one of the first ones that were sold. I love my Cinch machine. I have complete several scrapbooks with mine....thanks again for sharing this demo and the hacks were good....😊
Hi Thanks for sharing a really helpful tutorial 👍 I am so glad & very happy I found your crafty craft channel because whatever you are demoing you always do such a super duper fab job all so wonderfully clear step by step from start to finish 👍❤️🙂
Hi Tammy. Good review of the mini Cinch. I have the larger Cinch. I have made lots of notebooks with it. I do hide the binding inside and do not have any trouble with pages falling out. I think I need to get some spiral binders.
Thanks. I just bought the big Heidi swap cinch and am waiting for it, I wanted to see what the difference was and if it would make the wire combs crimp together more so pages won't fall out.
@@funtimecrafts2472That might be the trick. It has different settings for crimping the wire. Mine is teal blue and big, and punches round holes. But it works great.
The big reason for putting the back cover on top and then flipping it to the back after binding is to keep the pages from falling out. Might be worth trying even if you don't like the look of it.
I found your channel a couple of weeks ago and I really enjoy your content. You really enjoy crafting and it shows. Of all the reviews I’ve watched about this mini Cinch, yours is the most comprehensive and the most easily understandable. Thank you!
Fun video (and longer too - yay!) I have the Zutter Bind-It-All that I've had good success with. However I really like the WRMK spiral which I would probably exclusively use. So many tools, so little money haha.
I just got one of these and not sure about using it. I wanted it because we have a wedding in our family later in the year and thought it could be useful . Your video is very helpful. Not sure I understand your guide , but I'm guessing after starting to use this punch it will make since. I understand your goal with the guide. Thanks wish me luck on using the Cinch. I'm 73 years young.
Your tutorial is amazing! So helpful and exactly the information that I was struggling to find. Great job explaining everything and making it make sense. Thank you!
Hiiii....LUV IT! ❤ LUV IT! ❤ LUV IT!❤ Just what I've been looking for. Perfect detailed explanation. I hope I can find it. Thank-U Soooo Much. Blessings
Best tutorial I have seen yet. I have a Mini which only uses square holes. Can I use a spiral wire instead of the binding wire. Your are right it is better. Thanks
Great demo. I have a binder machine I have had for years. Don’t remember the name. The binding for it are all plastic. The cinch machine seems more complicated. I can bind 2-3 inches of paper at the same time. I don’t think I will be buying one of the cinch, but it is handy.
The cinch isn't shady I own thr big one and I love it and getting the mulit one too. Her spacing on her papers are not accurate she ki d of doing it wrong but that works for her
I have the disc binding cinche one and it annoyed me that it wasn't center aligned. my husband added a paddle pop stick to my guide with a bulldog clip it is even now :D lol I was thinking about 3d printing an added guide but I don't have to. thank you for your tips. I wrote my last comment before I finished watching the video.
i just made 2 wire ones today, thanks for your tips especially on the infor what each punch meant with the info on the side i cant see so i use my cell phone by taking a pic so i can read them...i just got my cinch was hsn also,they are out of everything at this time so i had to shop around for the seperate punch parts .someplaces are so expensive!!! I have them all except the square ,stll waiting for my bands to come to try that style ,I love the stitching oone too...and made 1.
Love this video! Informative, thank you!! What size coil- continuous wire did you use, I’m want to try it, I don’t like how the others pop open after time
Hello again. I have another question for you. I also bought the multi cinch and 7 cartridge bundle last week. It came today without any packaging, just the items wrapped in bubble wrap, instructions, all inside a brown shipping box. Is this how they sent yours? I see the we r memory keepers box in the background and was wondering how yours came. Thanks in advance 🙏
Mine came from HSN like that as well. I like the reduced packaging. There is plenty of help on the WeR website and TH-cam videos such as this one, so more elaborate instructions aren’t necessary. My only issue is having even gaps at either end of the punched paper; the guide presented here is a great work around!
This is a great video!! I cannot find where to purchase the multi cinch. I have looked through previous comments to know if anyone else has asked, can I purchase one of your vide books or will you share the instructions and materials used to make yours?
Nice demo and review! Sad WRM has issued another shoddy product (Disc Cinch has issues too). Holes were not centered on your initial sample and the circle cartridge should've punched your copy paper cleanly. The Disc Cinch doesn't punch centered holes unless your project size is a whole or a half. IMO, that alignment guide is the culprit and its flawed. At $149.99 +, you should not have had to create a template. I have the Version 2 Cinch and that machine works perfectly every time.
I just picked up one of those, and it does work really nice for punching, but it's a little tricky for crimping the binders. I'm still figuring that out. Tfw!! ❤😊
Thank you for a great review! I noticed there's also a heart punch for this cinch. I love hearts but trying to think of what I would use it for, besides just punching heats on the edge of a piece of paper. It's $30.33 so that would be a lot just for that. Curious if you have ideas of what else it would be used for. I'm thinking it may not be useful just for binding. Would love to hear your thoughts. :)
Thank you for video, I wish I had known it only did the 5/8" binding, before I bought, theyll prob come out with one later thats adjustable. but in the meantime I guess I can use my zutter bind it all to use ather size bindings.
@cherylh6360 I would be interested In buying this from you, I am moving out of the country and I cannot wait for the next release date... please let me know if you are interested! Thank you so very much!
It's where their math came out for that size paper when you use their guide. It's hard to accommodate for any size you could possibly punch with this tool, so they picked a happy medium for the different sizes. I found that after using it so much, the ease of use outweighs the spacing if I'm doing multiple albums. If I do a specialty item, I like the spacing to be more uniform.
Hello there! I saw that you mentioned that it can punch up to 2mm thick. Can this handle chipboard that thick? What other stiff materials do you think it could handle? Acetate maybe? TIA ❤
Hi, how much inches from the left side of the paper untill end of the gaps? I mean, I want to design something on computer but I have to know where the gaps would be, so my design fits perfectly. Hope you’ll answer🙏🏻
I am at the point where I am going to give up before starting. I have all the supplies just not the tools themselves. I am trying to decide which one I need because trying to get things shipped to Canada is so ridiculously costly
Looks like Amazon $110, fees $26 to Canada, multi cinch includes 2 punches. Here's a link, hope this helps. www.amazon.com/We-Memory-Keepers-Circle-Binding/dp/B0BV3CC4J7/ref=asc_df_B0BV3CC4J7/?tag=hyprod-20&linkCode=df0&hvadid=647300741666&hvpos=&hvnetw=g&hvrand=1472423429753227439&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9021394&hvtargid=pla-2033405998797&psc=1&mcid=39c608e41b99349ba8be36d884eb118b
Lol, the hack is to make the hole spacing more uniform top to bottom. Sometimes when you punch the paper you end up with a larger gap at the bottom than the top when you use their guide.
They were available on HSN, but sold out. If you google, Amazon, cherry on top, and a couple others have it. You can get restock notifications from scrapbook.com if you prefer to purchase there, or HSN does also.
@eramaehermosilla3474 If you are asking about plastic comb binding, no, it doesn't work with those. The binding fingers are too wide. Plus this machine can't open them. It's a totally different system. If you are talking about spiral binding, yes, there is a spiral punch, and it works great!
Where did you buy this? This model I could not find on Amazon or HSN. And does the punch attachments come with it or do you have to purchase them separately? Love the video, but it would help a lot if you list where you purchased them from. Thanks😊
It's the We R Memory Keepers Multi Cinch tool from HSN. Only 3 of the punches come with it on HSN. Unfortunately sold out out, here's a link if you want to look at it. www.hsn.com/products/we-r-memory-keepers-multi-cinch-book-binding-tool-bundl/20747068
it annoys me that the top hole is a different space from the edge of the paper from the bottom hole. I want the holes even on the page. It isn't worth the price.
As usual another great tutorial!
The notebook guide is GENIUS‼️
This is by far the most comprehensive guide of the machine. I saw a ton of videos and they explain very little about the guides and the crimping at the back etc.
Well done for your great video. 2 things to highlight: 1.There is very good Reason for the back page being put on the top, this is to help prevent the pages from falling out as the Back page is then on the straight edge of the spine ( (Good to use something a bit thicker for the Back Page) 2. in order to stop the pages coming loose you can push each of the rungs manually so that they pass each other Push manually a little more than the machine closes them, but in order for this to work The Back page MUST be the last one you put on. So that the Back page stays on the back of the spine, which then guides the spine & gives every other page the ability to turn smoothly. Hope this Helps
Thank you for this great tutorial! I made my first one today and your guidance was invaluable! ❤❤❤❤❤❤❤❤❤❤
Thanks so much for this wonderful video. It’s the only useful video on the MultiCinch that I’ve watched.
BRILLIANT! Thank you for your very clear explanations and hacks!👍🏻
By far one of the best tutorials on this new Cinch from We R Memory Keepers.
Thanks so much!! ❤😊❤
So glad you talked about liking the spiral instead of the of the wires that go in the square holes. I was thinking I'd prefer the spiral like you used. I'm thinking of getting this. Your demonstration video is convincing me that this is the cincher I should buy. Thank you so much!~ Wish I could give you 100 thumbs up!
Hello this was fab really thrilled your tutorial popped up never seen you before. I have now subscribed x
Thank you, thank you, thank you for this video. No other video that I watched told me what the marking meant to get perfect alignment. I appreciate this. I’ve been struggling to figure this out.
Thanks so much for this wonderful tutorial. I made the guide book, wat a great tip. Maybe I have a tip for you about removing the tray with punch outs. I frist remove the cartridge and then gently push the tray out from the insiders. That way the punch outs don’t fly everywhere . Best Regards, Mirande
Great informative introduction to the multi cinch! Thank you for sharing your discoveries. Your punch guide book is brilliant and helped me to understand how to make this tool work for me. Really good tutorial.
Great tutorial Sweetheart. Ill be getting mine soon. so nice i can go back and watch it again .hugs be safe
Thank you so much for your amazing and wonderful demo and review of the multi cinch I been looking at getting it and now have more of an idea of how it actually works lol😂.
Considering buying this machine , this is the best demo video I have found. Thank you for sharing your skills
Glad to see you are able to make longer videos! yay! I have a brand new Cinch purchased years ago and never took it out of the box!
Yay!!! Longer videos!! So far, so good!! OMG, get your toys out and play!!! Lol Happy crafting!!
Thanks for the information. I never had a cinch before. I just bought the multi. There are nots ton in helpful videos to so how to use. So thank you.
This is such a wonderful and informative review/tutorial! I love the reference notebook. Genius idea!!
Great tip to align last punch....I tried it and it works great.
Great tutorial! And love the template book. Thank you for sharing!
So helpful. You should sell the guide you created.
Thank you so much for sharing a great tutorial and I love the handy manual guide you made. 😊
You’re great at tutorials! I just found you and you explain and show everything so clearly. Your guide book is genius! I’m so happy I found you and can follow your channel to see all your creations!
🥰Totally Agree I Love it, Thanks a lot
Thank you for this very clear and helpful video! I bought it and haven’t tried it out yet. I’m so glad I found this video! 😊
Great video! Thanks for all of the tips when using the multi cinch!
You bet!! ❤😊 TFW
This is incredibly helpful. I just got my cinch and I'm going to set up the guide book like you did. Really smart idea. Thank you for sharing.
You are so clever. Love the template guide you made. Such a time saver and paper saver if you think about it. Great video! ❤️👍
Thanks so much! 😊
Thank you so much for all of this great info! You did a fantastic job explaining and providing great tips! 😁 oh yes, and absolutely love the beautiful guide you created! I really need and want to make one! 😍
Hi, thank you for this detailed information! I am looking trying to decide if I want a 2nd hand gray & yellow Cinch & a multi or just one or the other…I am closer to deciding now. This will be my 1st time using these machines. New subscriber 😊
Fabulous instructions and tips, thanks for sharing! I have the larger one and haven’t taken it out of the box. 🤦♀️
Cathy, You should play!! I just bought the bigger Heidi swap one! I'll do a demo when I get it!
Such a well done and comprehensive instructional vid!
That cheat book is amazing! Something I would have done myself had I thought of it myself... A light bulb moment so to speak lol. Thanks for sharing!
Great how you explain and show how to crimp wires to form the closed binding
I bought that exact one with all the punches too my first clinch thank you for the video
What a great video! It's more than just a tutorial; it's an intimate guide! I bought the larger Cinch in 2019 with plans to bind my custom baseball scorekeeping sheet into books, but then baseball season was delayed for months and in the meantime, I learned how to bind books with thread and I never got back to the coil project. I'd still like to give it a try, but I really wish I had this newer model with different cartitridge options and a smaller footprint! I probably will cave and pick up WRMK's book binding template tool-at least that will slide into a drawer.
I've found the more I use it the more I really love it. The bigger one is great for perfect hole placement and not to much thinking about it. I just picked up one and love it also. TFW ❤😊❤
So helpful! Thank you . 🙏🏻
Great channel and video.
Great instructions 💙🙏. Just bought one still learning, especially the sizes of the binding wires. Bought the wrong ones 😢.
Excellent tutorial! Thank you for doing this!
My pleasure! ❤😊 TFW
What a great demo....thanks...I have one of the first ones that were sold. I love my Cinch machine. I have complete several scrapbooks with mine....thanks again for sharing this demo and the hacks were good....😊
Thanks for watching! I just picked up the original as well and really love it! It so user friendly for punching all sizes of pages!! ❤😊❤
Hi Thanks for sharing a really helpful tutorial 👍 I am so glad & very happy I found your crafty craft channel because whatever you are demoing you always do such a super duper fab job all so wonderfully clear step by step from start to finish 👍❤️🙂
Thank you! I really appreciate your kind words!! ❤️
Hi Tammy. Good review of the mini Cinch. I have the larger Cinch. I have made lots of notebooks with it. I do hide the binding inside and do not have any trouble with pages falling out. I think I need to get some spiral binders.
Thanks. I just bought the big Heidi swap cinch and am waiting for it, I wanted to see what the difference was and if it would make the wire combs crimp together more so pages won't fall out.
@@funtimecrafts2472That might be the trick. It has different settings for crimping the wire. Mine is teal blue and big, and punches round holes. But it works great.
The big reason for putting the back cover on top and then flipping it to the back after binding is to keep the pages from falling out. Might be worth trying even if you don't like the look of it.
I found your channel a couple of weeks ago and I really enjoy your content. You really enjoy crafting and it shows. Of all the reviews I’ve watched about this mini Cinch, yours is the most comprehensive and the most easily understandable. Thank you!
Fun video (and longer too - yay!) I have the Zutter Bind-It-All that I've had good success with. However I really like the WRMK spiral which I would probably exclusively use. So many tools, so little money haha.
I just saw that one and was wondering about it. Yes I love the spiral. My wish list is a mile long ,if only there was enough time to explore them all!
I just got one of these and not sure about using it. I wanted it because we have a wedding in our family later in the year and thought it could be useful . Your video is very helpful. Not sure I understand your guide , but I'm guessing after starting to use this punch it will make since. I understand your goal with the guide. Thanks wish me luck on using the Cinch. I'm 73 years young.
Good luck, hope it goes well!
Your tutorial is amazing! So helpful and exactly the information that I was struggling to find. Great job explaining everything and making it make sense. Thank you!
Hiiii....LUV IT! ❤ LUV IT! ❤ LUV IT!❤ Just what I've been looking for. Perfect detailed explanation. I hope I can find it. Thank-U Soooo Much. Blessings
You are so smart 👍🏻 Great video demo.
Best tutorial I have seen yet. I have a Mini which only uses square holes. Can I use a spiral wire instead of the binding wire. Your are right it is better. Thanks
Yes, just have to buy the proper ratio of spiral. I believe it's 2:1 and it doesn't matter what diameter, whatever fits your project.
Just got back one. This was very helpful! Thank you!
Great demo. I have a binder machine I have had for years. Don’t remember the name. The binding for it are all plastic. The cinch machine seems more complicated. I can bind 2-3 inches of paper at the same time. I don’t think I will be buying one of the cinch, but it is handy.
Thanks, it's handy but you're right at the same time very fiddlily!
The cinch isn't shady I own thr big one and I love it and getting the mulit one too. Her spacing on her papers are not accurate she ki d of doing it wrong but that works for her
Great tutorial! Thanks😊
Thank you! I was really struggling.
Thank you for mentioning that the cinch is not adjustable. That’s a dealbreaker for me.
Thank you for this video. It was very informative.
Good information 😊😊
Thanks 😊 TFW
I have the disc binding cinche one and it annoyed me that it wasn't center aligned. my husband added a paddle pop stick to my guide with a bulldog clip it is even now :D lol I was thinking about 3d printing an added guide but I don't have to. thank you for your tips. I wrote my last comment before I finished watching the video.
i just made 2 wire ones today, thanks for your tips especially on the infor what each punch meant with the info on the side i cant see so i use my cell phone by taking a pic so i can read them...i just got my cinch was hsn also,they are out of everything at this time so i had to shop around for the seperate punch parts .someplaces are so expensive!!! I have them all except the square ,stll waiting for my bands to come to try that style ,I love the stitching oone too...and made 1.
Glad it helped! 😊❤
Such a great tutorial! Thank you so much
Love this video! Informative, thank you!! What size coil- continuous wire did you use, I’m want to try it, I don’t like how the others pop open after time
Also with the coil wire, can it be used on the square punch? I only have the disc and square punch
Hello again. I have another question for you. I also bought the multi cinch and 7 cartridge bundle last week. It came today without any packaging, just the items wrapped in bubble wrap, instructions, all inside a brown shipping box. Is this how they sent yours? I see the we r memory keepers box in the background and was wondering how yours came. Thanks in advance 🙏
Mine came from HSN like that as well. I like the reduced packaging. There is plenty of help on the WeR website and TH-cam videos such as this one, so more elaborate instructions aren’t necessary. My only issue is having even gaps at either end of the punched paper; the guide presented here is a great work around!
This is a great video!!
I cannot find where to purchase the multi cinch.
I have looked through previous comments to know if anyone else has asked, can I purchase one of your vide books or will you share the instructions and materials used to make yours?
Great tutorial! Do you sell your guide book?
Great information 😊
Thanks ❤😊 TFW
Nice demo and review! Sad WRM has issued another shoddy product (Disc Cinch has issues too). Holes were not centered on your initial sample and the circle cartridge should've punched your copy paper cleanly. The Disc Cinch doesn't punch centered holes unless your project size is a whole or a half. IMO, that alignment guide is the culprit and its flawed. At $149.99 +, you should not have had to create a template. I have the Version 2 Cinch and that machine works perfectly every time.
I just picked up one of those, and it does work really nice for punching, but it's a little tricky for crimping the binders. I'm still figuring that out. Tfw!! ❤😊
Thank you for a great review! I noticed there's also a heart punch for this cinch. I love hearts but trying to think of what I would use it for, besides just punching heats on the edge of a piece of paper. It's $30.33 so that would be a lot just for that. Curious if you have ideas of what else it would be used for. I'm thinking it may not be useful just for binding. Would love to hear your thoughts. :)
Thank you for video, I wish I had known it only did the 5/8" binding, before I bought, theyll prob come out with one later thats adjustable. but in the meantime I guess I can use my zutter bind it all to use ather size bindings.
Yes, I wish it did more sizes too! But for now the 5/8 is great for mini albums! TFW!! 😊❤
@cherylh6360 I would be interested In buying this from you, I am moving out of the country and I cannot wait for the next release date... please let me know if you are interested! Thank you so very much!
@@melissakaypearson113 thank you for the offer, but I'm keeping it.
Excellent Instructor
Can you make 4:1 holes by using 2:1 spacing and then going back and doing additional punches between those?
this is another must have thanks for sharing
It really is! 😊❤
Great tutorial 💕🤗
Thank you 🤗
what a great video!! thanks you so much for this!! btw where do you buy your plastic spirals? thanks!
Thanks 😊 scrapbook.com or Amazon
Great information.😊❤
Hi Tammy can you demonstrate the rubber band cartridge punch. I’m having trouble using it??
Thank You for your help
tips on cutting though chipboard
Just wanna spread the word! Hsn has the ENTIRE KIT on sale for $179 right now!
WITH EVERY ATTACHMENT!
Thank you!!!
Wow that’s so cool!
Can you explain please why in the first example that the holes were not equally spaced at the top and bottom ?
It's where their math came out for that size paper when you use their guide. It's hard to accommodate for any size you could possibly punch with this tool, so they picked a happy medium for the different sizes. I found that after using it so much, the ease of use outweighs the spacing if I'm doing multiple albums. If I do a specialty item, I like the spacing to be more uniform.
That machine you can cinch pages 8x11 and larger?
Yes you can cinch 8x11 or larger, your not limited by length just size of binding wire. It only does 5/8"
Hello there! I saw that you mentioned that it can punch up to 2mm thick. Can this handle chipboard that thick? What other stiff materials do you think it could handle? Acetate maybe? TIA ❤
Yes on chip board, not sure on other materials like acetate, Haven't tried yet.
Hi, how much inches from the left side of the paper untill end of the gaps? I mean, I want to design something on computer but I have to know where the gaps would be, so my design fits perfectly. Hope you’ll answer🙏🏻
How’s that one called? I have the mini cinch and you can’t change the hole thing. Where did you get that one?
I am at the point where I am going to give up before starting. I have all the supplies just not the tools themselves. I am trying to decide which one I need because trying to get things shipped to Canada is so ridiculously costly
Looks like Amazon $110, fees $26 to Canada, multi cinch includes 2 punches. Here's a link, hope this helps. www.amazon.com/We-Memory-Keepers-Circle-Binding/dp/B0BV3CC4J7/ref=asc_df_B0BV3CC4J7/?tag=hyprod-20&linkCode=df0&hvadid=647300741666&hvpos=&hvnetw=g&hvrand=1472423429753227439&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9021394&hvtargid=pla-2033405998797&psc=1&mcid=39c608e41b99349ba8be36d884eb118b
Great Demo & Information, thank you!
I have the mini. Can you purchase the different cartridges? Or do you have to purchase the machine so you can swap out the cartridges?
Unfortunately You have to buy the new machine that takes the cartridges, if you like the mini, you'd probably love the versatility of the multi cinch!
What if you need to undo the crimped/bent booklet to either add or take away a page?
You would have to pull the crimps apart individually by hand and use a new wire to bind it up again.
Great video, love all your tips and tricks, but I did not understand your hack 🙃
Lol, the hack is to make the hole spacing more uniform top to bottom. Sometimes when you punch the paper you end up with a larger gap at the bottom than the top when you use their guide.
Can you use 2-1 sprials
When will they be available?
They were available on HSN, but sold out. If you google, Amazon, cherry on top, and a couple others have it. You can get restock notifications from scrapbook.com if you prefer to purchase there, or HSN does also.
I'm quite sad it only holds 5/8 wires/spiral. I needed bigger ones because my projects are thick. 😢
can it be used with a plastic ring bind?
@eramaehermosilla3474 If you are asking about plastic comb binding, no, it doesn't work with those. The binding fingers are too wide. Plus this machine can't open them. It's a totally different system. If you are talking about spiral binding, yes, there is a spiral punch, and it works great!
link to all supplies pls
What size coil do you buy?
5/8" from scrapbook.com, they came in a pack of 30 for $20ish and said they were for the multi cinch.
Thank you. All out of stock.
❤😊
Where did you get the disc cartridge?
Hsn.com
Hello.how to get this set?
Where did you buy this? This model I could not find on Amazon or HSN. And does the punch attachments come with it or do you have to purchase them separately? Love the video, but it would help a lot if you list where you purchased them from. Thanks😊
It's the We R Memory Keepers Multi Cinch tool from HSN. Only 3 of the punches come with it on HSN. Unfortunately sold out out, here's a link if you want to look at it. www.hsn.com/products/we-r-memory-keepers-multi-cinch-book-binding-tool-bundl/20747068
it annoys me that the top hole is a different space from the edge of the paper from the bottom hole. I want the holes even on the page. It isn't worth the price.