Supercharged 2003 Mercury Marauder walk around
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- Just a walk around formally introducing my 2003 dark blue pearl Mercury Marauder. I Eaton swapped the car during quarantine 2020 with a lot of Cobra parts and some custom parts as well.
Mod list:
Stock Marauder long block
Stock trans
Stock rear end
Lower intake is from an 04 Cobra
Eaton M112 supercharger from an 04 Cobra
Underdrive lower pulley with 3.0 upper
Stock fuel rail from the Marauder with stock 34lb Cobra injectors
Aeromotive 340 fuel pump
Stock Cobra intake tube with Cobra maf along with MAFIA and k&n filter
EGR delete
Frozen boost type 100 heat exchanger
Cobra intercooler and pump
Custom Eaton swap brackets from Gerald Irwin
Be sure to follow me on Instagram ...
Dream car! Exact color and all. I had to subscribe
Thanks fam. I'll have more content on it coming soon!
@@greatoutdoorsman2009 notifications are on I’m definitely looking forward to it ✊🏾
Very clean Eaton swap! I'm building up my Mach 1 and will be doing an Eaton swap as well. Just subbed.
Thank you sir!
Why is this an Eaton swap? It's just adding a roots supercharger to a N.A vehicle right?
@@Commander76 The manufacture of the supercharger is Eaton.
I’m not much into Fords… but THIS is sweet dude 👍🏼
i had some videos saved on youtube about some dude showing step by step on how to install an eton m90 on a 09 crown vic but cant find any of em lol sucks because i was gonna follow step by step on installing it but guess he took em all down. nice build
I love it. I have an 06 Mercury grand marquis limited edition. Given me great ideas. Thanks
Holy grail marauder👍🏼… man I had one like 10 years ago with 160,000 miles…. Sold it like a dumbass😂
I love this man. Absolutely amazing
Thanks pimp
Did this last summer to mine😁...now I need a Whipple in my life😅🤣
Yo same. I'm gonna build the bottom end first though so I don't give the road an oil bath
@@greatoutdoorsman2009 that's what I did. Forged the bottom. Over bored .20 and stage 2 comp cams.
I have a 2007 grand marquis and I want a supercharger in it but don’t know what to look for any help please
How much did it cost to supercharge it?
S/C done right. It would never pass Kalifornia emissions so I will not be living the dream.
awesome car dude!!!
🔥🔥🔥🔥🔥🔥
Great job bro!!!
I love it bro I’m looking for me one now to do the same scat pack worse nightmare
Very nice!! I got #89 supercharged as well🤙🤙
Thanks pimp
Nice swap! welcome to the Eaton swap club.
Thanks
Gerald is an awesome guy. What size S/C belt did you go with on your setup?
Hell yeah!!!
Looks Great! Do you need any adapters to bolt the blower and manifold to the motor?
No it bolts right up after you grind a little material off the bottom of the lower intake and flatten the coolant return tube on the back of the water pump a little. Also have to grind off the knock sensor bosses on the block and relocate the knock sensor to the back of the cylinder head
Love it. Mine is stock. Black.
Amazing
Nice car a one little question you upgrade you mass air flow sensor or is the stock
Stock cobra sensor
But cobra mass air flow have only 4 pin right
@@jonnyvargas9394 right. You have to extend the wires for the intake air temperature sensor from the marauder harness since it's located on the back of the intake manifold on a cobra and nit built into the maf like on the marauder
That's only if you have a supercharger right
@@jonnyvargas9394 right
Ok I subscribed don't disappoint
Clean that thing man. Especially the engine bay
The engine bay is gonna get dirty anyway cleaning it is stupid bc very few ppl look st it
Love that car brother!! I live in Richmond kentucky lol.
Thanks pimp. If you're ever around Taylorsville I'll take you for a spin
@@greatoutdoorsman2009 bet! I get that way every once in a while.
@@PantherlPlatformGuy I'll be here. Hit me up on Instagram you're down if you're in town
@@greatoutdoorsman2009 will do brother
Wow I know she eats waaaaaaaaaay more gas now. Great video bro 😎
What is the average cost to make it supercharged. I currently have 04 marauder but have it all stock
Very awesome, does it still top out at 120mph or did you remove the limiter?
The limiter was tuned out
@@greatoutdoorsman2009 oh ok, so when you go past 120mph does the driveshaft vibrate or you don't feel anything
@@krownvikkhris3004 there's a slight vibration, either drive shaft or slightly unbalanced tire
@@greatoutdoorsman2009 ok, you may have to get it rebalanced for higher topspeed with the 3.55s because I have an 06 P71 crownvic with 3.27s and I can do 135mph with no problem.
@@greatoutdoorsman2009 or find an Aluminium metal matrix driveshaft from a 99-2000 P71 crownvic police interceptor. They could sustain speeds higher that 120mph with 3.55s when equipped with that special driveshaft. I'm tryna find one now for my car
Looks cool, Is that Gerald's Steel cross over tube & cot plug.
Yes it is
@@greatoutdoorsman2009
Cool , Gerald did my Trilogy Supercharger install Aug 2019 & helped with part #s for the big brakes mod. Which made a huge difference in power & stopping. :)
@@gordroberge3824 he was a very big help. On another note I still watch the videos of your car I took at the Louisville meet in 2017 because I'm ready to cam my car
My next mod is the Killer Chiller install at Mo's 2021.
My MOD List
Engine Trilogy Super Charger with a Stock Bottom End Block
Comp Cams Stage 3 Blower Cams 475 Intake & 450 Exhaust Duration
X Cal 4 With Mo's 94 Octane Tune
Manley 4V Valve Springs
JLT Cold Air Intake / 90 Mass Air Meter
Motor Craft Coil Packs with Granatelli Connectors
42 LBS Injectors / KRC 100 Micron Inline Fuel Filter
Automotive 340 Stealth Fuel Pump
Stewart EMP Water Pump
Exhaust System
KOOKS Mid Length Headers / X- Pipe / Two High Flow Cats
Pro-Flow Mufflers With 4 Inch Resonator Delete Tips
Transmission
Lentech Street Terminator 4R70W STT Rated 700 HP
Circle D 11" HP Series 4R70 2,800 Stall Converter
Brakes & Suspension
TCE Braided Brake Lines Front & Back / Black Hart Drilled Slotted Rotors
Front Big Brakes Mod With C5 Corvette Calipers & Shelby GT 500 Rotors
Hurst Line Lock
Addco Front & Rear Sway Bars
Metco's Upper / Lower Control Arms / Watts Link / Drive-Shaft Loop
FCS Front Strut Shocks & Rear Monroe Severe Service Shocks
Rear Axle
4:10 Gears / TA Rear Girdle Cover / 31 Moser Spline Axles / Trac Locker Diff
Tires
Front Nitto 555 G2s - 245s
Rear Nitto 555 G2s - 295s On Widen Rim’s & M/T’s 305s On Widen Rim’s
Car Fixer’s Alignment
Lighting
www.superbrightleds.com
Morimoto HID fog lights
Power Adder
ZEX Blackout NOS System / Bottle Heater / 125 HP Shots-"Not Used"
Dyno By Mo's Speed Shop, Dallas,Georgia
450 RW/HP @ 400 Torque
Say bro sweet set up how much did it cost for to turn the key and drive
I had about 4-5k in parts and did all the work myself
A blue one? Holy cow it's rare
1 of 328
Nice! 👍
nice job g
Thanks pimp
Ow! My face! @ 0:26
Where did you locate the battery at? Also, any chance you could share the part numbers on the pulleys you used?
The batter is located where the stock air box was and I used the pulley kit from Metco motorsports
Where did you get your coolant crossover tube? Did you have your stock Marauder tube modified?
You can have the stock one modified or delete it. I just went with a stainless shortened one from Gerald Irwin
@@greatoutdoorsman2009 what is Gerald Irwin’s info?
And how much was the crossover tube?I will be going this route as well.
@@braylongodleydrummer7205 he's in the the marauder Facebook group. They cost $550 I think
Goals
Thanks. It was one of my life goals to have a blue one
@@greatoutdoorsman2009 I attempted to buy a wrecked BLUE a month ago...it ended up selling in less than 2 hours
@@MrRL95 yea blues in any condition sell quick anymore
Where did you mount your afr on the exhaust at… before or after cats
I haven't plumbed a probe yet
Where’d you get the build list at? Like all the parts and what not
Mercurymarauder.net
So the 2003 terminator cobra can fit right in the Mercury marauder?
Yes, it can. Drop right in.
How much did you spend on all this
About $4500 but I did all the work myself
The shifter thow it’s not a steering wheel shifter?
All Marauders have a center console shifter
Do these have the "4R70W" in them?
Yes
Where did you hook up your egr valve?
I deleted it
Can you do a POV drive?
I'll try and get one this weekend
Where did you find the supercharger ?
Ebay. It's a stock supercharger from a 2004 mustang cobra
How much did this swap cost u?
About 5k. That's just for parts. I did all the work myself
if you did sell it what kind of price would it take?
15k
@@greatoutdoorsman2009 how many miles does it have ??
How’s the trans a year later
Still shifts like new
No fly by?
I've got you
I’m not trying to tell you about your car but I’m pretty sure that’s a 2004 it’s got the traction control and the clock is not in the dash The 2003 has a clock in the center and does not have traction control
There's a 2003 300a and 2003 300b. The 300b's had traction control and no center clock
@@greatoutdoorsman2009 I thought the 2003 had the locking gas door, yours has the 2004 gas door.
@@douglaspawlik 300a's had a locking gas door and map pockets, mine is a later 2003 300b. 300b's had the same features as 2004 marauders because all 2004's were 300b's
Ever sell it let me know. I'd love another Blue MM
Don't know if I could part with it
@@greatoutdoorsman2009 I understand! I was offered $20k for mine a short time back and still said no. I went through hell to get mine and it just is worth more than it's value to me.
So, update: horrible of horrible happened to me. Hit a deer with MM. The damage wasn't horrible but because of major inflation, the insurance really doesn't want to fix it. The quote for repair was almost $7k. Insurance, if I want to keep, will give me $7500 after salvage! I told the adjuster that made no sense to give me more money than it costs to fix just to fix it. I'm trying to find a second opinion but I'm in a smaller part of Texas (not near any metroplexes) and everyone is backed up a lot to even give a quote. The cruddy thing is, it runs and drives fine there's no sub frame damage, just hood, front clip and passenger front fender. The labor for the replacement of bolting on parts and paint is almost $3k that's what is really causing the problem. Anyway, thought I'd share. It's so disheartening.
Do a pov!!!
What do you mean? Pov of me driving?
@@greatoutdoorsman2009 yes
@@03_reaper77 will do! Subscribe if you don't mind so you'll catch it
@@greatoutdoorsman2009 I totally will, when I get enough money I'm going to be buying one because right now I have a 2004 Grand Marquis and I really want to modify the Marauder when I get it
@@03_reaper77 that's awesome. Truth is they really aren't that hard to work on at all
Do U still have it?
Sure do
Are u trying to sale?
@@carlotribblejr8678 I wouldn't let it go for less than 12k
Was that factory bird poop too. Nice car but wash it when you show it! C-mon man.
Eh it'll be alright
@@greatoutdoorsman2009 yeah but 🤦🏻
Sell it to me!!
It would take alot
@@greatoutdoorsman2009 lol everyone ik with one wants oh hell. Lol I'll give you 4,000.. and two legally rightful owned glocks 10mm, & 357 sig ... with receipts lol
@@nhcp371 gotta pump those numbers up😅
If you are a car guy come on now take care of your interior Sir
It's clean now
Amazing.
🔥🔥🔥🔥🔥