Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
@@ABLOCKANDKEY Do I still have to disassemble the BCM to read the immo date? Or can everything be done according to the OBD? I just asked the guys in Russia, they say the BCM is open, everything can be done according to the OBD. Tell me, is it true what they say here?
For make the dealer key need data synchronization on all key lost ! is not possible program key only from read data sc code ,need bay data!!! To program key .
Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
If you peel the protective plastic off the screen protector on your autel touch screen will become much more responsive.
Thanks for the tip.
Can you write immo data to another used BCM2?
Thanks for the video. Can you lease tell me which diode did you use? Volts etc ?
Thanks in advance
use 1 amp 400V. Should work evetime
What resistor or diode do you use to reset pls
Thanks for the video, Can autel im508s do it!?
should be able to with xp400 pro
Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
Try via obd first, that's how you can tell whether it is locked or not.
Have you tried the Xhorse solderless connectors?
Soldering is a very important skill that I prefer to practice.
Thanks for the video. And there is a video how to add a key to the keyless 11g. Taureg. ?
2011 VW Touareg: It's an IMMO-V or BCM2, same system as the one in the video.
@@ABLOCKANDKEY Do I still have to disassemble the BCM to read the immo date? Or can everything be done according to the OBD? I just asked the guys in Russia, they say the BCM is open, everything can be done according to the OBD. Tell me, is it true what they say here?
if the BCM is not locked, you can obtain your CS code and PIN via OBD using IM608.
good luck@@ИванПанасийский
hi 2 wires have diodes what is their resistance👍
You can use anything from 1A/100V to 1A/200V.
For make the dealer key need data synchronization on all key lost ! is not possible program key only from read data sc code ,need bay data!!! To program key .
Erm no?
Only A6, A7 and A8. Not A4, A5, Q5
You need sync data for MQB. This is not the case.
Can't do proximity key though. right ?
Not all of them, unfortunately. AKL situations I always try a semi-smart if there is a slot, even if it was a prox system.
@@ABLOCKANDKEY does that work every time on proximity system with IMMO V?
I had better luck with Porsche's BCM's than VAG's.
Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
Can you make a dealer key with this data or do you need something else?
I did not on this one
where you get those wires
IM608 should come with some.
Amazon
Or make them yourself, not complicated.