I highly doubt this is aluminum and I personally find this video presentation quite impressive. Being a professional machinist and engineer, I believe this is a great example of some seriously fast and accurate chip removal :)
it looks like it wastes some time though... im not sure if thats due to programming and could be changed or not but i feel it could take other paths to shorten time
It is partly to demonstrate how quickly they can remove material with a small endmill. The troichoidal cutting extends the life of the tool tremendously versus slotting. They have another video machining some sort of steel that is way more impressive.
Then what is it? If you've made so many chips then the least you could do is tell all us "couch machinists" what looks, cuts and sounds exactly like aluminum?
Rob Graham I don't know what looks, cuts and sounds exactly like aluminum, but the piece being machined was steel. Watch after 4 minute marker and you can find a spark (aluminum doesn't do it) and you can see colored chips (which aluminum again doesn't do).
TheAimlessWarrior, care to explain how an earth aluminum sparks or makes oxidation colored chips which are both prominent features of steel but not aluminum? Unidal is just an aluminum alloy, which also doesn't spark or produce colored chips. To recap, all sorts of armchair machinist there are when they claim that that workpiece is aluminum. Best to make some chips first before commenting something stupid aloud.
i dont have money to buy it. It is very expensive to me because I am student. I cant buy it unless I have job and enough money for it. That's why I searching for the crack. I hope somebody can help me. btw, I already have install the trial long time ago and already expired .
I highly doubt this is aluminum and I personally find this video presentation quite impressive. Being a professional machinist and engineer, I believe this is a great example of some seriously fast and accurate chip removal :)
what is it that put iMachining up top?
ITS A VERY CRITICAL.BECAUSE I AM A GM STUDENT
what part is this?
what machine is this?
what song ?
darude - sandstorm
Are you using MQL?
Guys this is no Aluminium!
Alu can be cut much faster than this!
I think its 1.2842 or maybe an 1.2379
niemals alu ! geb ich dir recht domi kuk mal die oberfläche vom planen an hast bei alu nie so
Dominic Schmidt 2379? Nie im Leben ist das Werkzeugstahl XD Zudem wird ein Alufräser genutzt. Wer weis was für eine Legierung das Dingen hat
it looks like it wastes some time though... im not sure if thats due to programming and could be changed or not but i feel it could take other paths to shorten time
It is partly to demonstrate how quickly they can remove material with a small endmill. The troichoidal cutting extends the life of the tool tremendously versus slotting. They have another video machining some sort of steel that is way more impressive.
@EZDUZIT8 No tweaking at all!
that looks pretty high tolerance to me.
stock ???
What is the material?
Metal!!!!
;)
fancy rocks.
Stephen Hodge
butter
Aluminium
aluminum doesn't spark
Got to be Aluminum,You can see it in the holes for example
Lmao you can see the chips immediately change color
Judging by the color of the chips, and how its sparking on cut exits. Its steel.
Funny to read how all the couch "machinists" know that the material is aluminum. Just goes to show that they haven't made a chip in their life.
Then what is it? If you've made so many chips then the least you could do is tell all us "couch machinists" what looks, cuts and sounds exactly like aluminum?
Rob Graham I don't know what looks, cuts and sounds exactly like aluminum, but the piece being machined was steel. Watch after 4 minute marker and you can find a spark (aluminum doesn't do it) and you can see colored chips (which aluminum again doesn't do).
Jaakko Fagerlund it is alu. They also use alu tools. Maybie it's unidal or constructal, nobody can see the difference
TheAimlessWarrior, care to explain how an earth aluminum sparks or makes oxidation colored chips which are both prominent features of steel but not aluminum?
Unidal is just an aluminum alloy, which also doesn't spark or produce colored chips.
To recap, all sorts of armchair machinist there are when they claim that that workpiece is aluminum. Best to make some chips first before commenting something stupid aloud.
Jaakko Fagerlund
i googled a bit, maybie it's 16mncr5
i have no idea what is being made i just like watching stuff get machined
same here^^
ipadize acQQqqq q qqq111
Dogan G. you need a doctor
Yes you need SolidWorks to run SolidCAM
whatch out dont let ur machine watch at the terminator movies,it might give it some ideas...
solidcam is the best forever
+sergocam do you use solidcam? where can I get the crack?
+Keme Hakim You can register on www.solidcam.com for free trial or contact your local reseller.
i dont have money to buy it. It is very expensive to me because I am student. I cant buy it unless I have job and enough money for it. That's why I searching for the crack. I hope somebody can help me. btw, I already have install the trial long time ago and already expired
.
can you sponsor me the 5 axis Solidcam version with all its features, updates and service? I may want to build a 5 axis for my home :)
So.... could this machine... machine its-self? :O
@EZDUZIT8
The Tool paths is auto created using a wizard, go to the iMachining page on solidcam (dot) com website to learn more.
how sweet... you milled some aluminum fast with a tiny endmill....
I just use this app...since 2010...what could I say?😄😄😄
If this is how you want to make business contacts, you aren't going to get much from it.
como mantequilla
Wow das ist ja SUPERHARTES Aluminium.
Das sieht aus wie Alu😂 dann solche geringen Vorschübe....
I knew it! And they keep telling us that magic is not real!
Thumbs up if you find mechanical engineering awesome!
Legal Porn
S C I E N C E
Metal or piece of cake lol
2 words!! FUCKING awsome!!!!!
wtf did I just watch?
looks like one totally awesome cookie cutter. =S
lol india