Now i know how this works, thanks! but i still have two questions left: number 1: do i need individual sizes for the holes for the pipes or can i choose it? and if yes what are the measurings? and number 2: will you release the plans for the portativ organ with the measurings? And at 6:05 - 6:19 it sounds a bit like when you are speaking like in the sims. But at always great Video!
Thanks Animalistik, usually for 2' stops the holes are from 8mm for the lower C to 6mm for the highest pipe. I chose to be abundant and I started from 12mm of holes for the lowest note and scaling up to 6mm for the highest. Yes, as I am sure everything works I will make the projects available. And yes, I was talking to myself😅
Ciao Marco, Grazie. Come punte posso dirti, più che la marca, di prendere un modello che abbia la punta centrante molto corta, quelle che ho vanno bene come affilatura ma hanno la punta un pò troppo lunga e se devo togliere tanto materiale e lasciare uno strato sottile di legno rischia di passare dall'altra parte.
Technically this is called a toe board. A soundboard is found only in pianos. A soundboard is a resonant part, in a pipe organ the pipe are the resonators.
thanks for the clarification, actually I had heard some organ builder who called it soundboard but being Italian I'm not sure it's the correct term, surely toe board makes sense.
@@nippocast Thanks, I think there was some confusion at some point in the past, find a copy of the art of organ building by George Ashdown Audsley. I believe it is discussed in there somewhere.
Интересно очень,но времени маловато будет,передумал,орган строить не буду ,плани поменялись,готовий лучше купить..! Если играть на нйом буду!!?? Александр Одессит
Thanks so much for the video, this type of wind chest is different from the conventional ones used for larger chamber organs? Is this design similar to that of chest (box) organ for basso continuo?
Hi Xiaohu, this is not a windchest, this is a soundboard which serves to distribute the wind to the pipes. The winchest has the pallets that are opened by the actions connected to the manual. It will be similar to that of a trunk organ but much smaller
Hello everyone! Finally I begin to build something other than pipes. Please Comment and Like. Thanks!
3:23 Outstanding! 😂
😂 Yes!
I notice too :)
It's looking good!
Thanks Ken!
Awesome work!
Thanks Travis!
Great video! Thanks
Thanks antony!
Nice progress!
Thanks Jordan!
Todo un arte
Saludos desde México
Thanks! Saludos desde Italia
Now i know how this works, thanks! but i still have two questions left: number 1: do i need individual sizes for the holes for the pipes or can i choose it? and if yes what are the measurings? and number 2: will you release the plans for the portativ organ with the measurings?
And at 6:05 - 6:19 it sounds a bit like when you are speaking like in the sims.
But at always great Video!
Thanks Animalistik, usually for 2' stops the holes are from 8mm for the lower C to 6mm for the highest pipe. I chose to be abundant and I started from 12mm of holes for the lowest note and scaling up to 6mm for the highest. Yes, as I am sure everything works I will make the projects available. And yes, I was talking to myself😅
¡De nuevo fantástico! ¡fantastic, again!
Thanks
Will you sell the drawins of this instrument when the work is completed?
Hi Despelothier, Thanks! yes, I'm going to make a complete drawing
Veramente un buon risultato! Mi chiedevo quali tipi di punte forstner consiglieresti di usare ad un hobbista, quale mi reputo🤔
Ciao Marco, Grazie. Come punte posso dirti, più che la marca, di prendere un modello che abbia la punta centrante molto corta, quelle che ho vanno bene come affilatura ma hanno la punta un pò troppo lunga e se devo togliere tanto materiale e lasciare uno strato sottile di legno rischia di passare dall'altra parte.
Did you consider the traditional method of burning the pipe seats , rather than using a countersink?
Yes, but I haven't the tools.
Technically this is called a toe board. A soundboard is found only in pianos. A soundboard is a resonant part, in a pipe organ the pipe are the resonators.
thanks for the clarification, actually I had heard some organ builder who called it soundboard but being Italian I'm not sure it's the correct term, surely toe board makes sense.
@@nippocast Thanks, I think there was some confusion at some point in the past, find a copy of the art of organ building by George Ashdown Audsley. I believe it is discussed in there somewhere.
Muy lindo. Como consigo los planos. Saludos
¡Gracias! tan pronto como termine el órgano portátil voy a publicar los proyectos
Интересно очень,но времени маловато будет,передумал,орган строить не буду ,плани поменялись,готовий лучше купить..! Если играть на нйом буду!!?? Александр Одессит
Thanks so much for the video, this type of wind chest is different from the conventional ones used for larger chamber organs? Is this design similar to that of chest (box) organ for basso continuo?
Hi Xiaohu, this is not a windchest, this is a soundboard which serves to distribute the wind to the pipes. The winchest has the pallets that are opened by the actions connected to the manual. It will be similar to that of a trunk organ but much smaller
@@nippocast Sorry, I misunderstood😂 thanks for the kind reply
Can you make a video, that how would you make a pipe organ which keyboard is a midi keyboard?
Hi Zsolt! I have many projects in mind and this is a possibility, but for now I want to continue this project. Thanks for the question!
This is where I start getting confused, I don’t understand the layers.
it is a bit complicated😅. A simpler, but less refined solution is to connect plastic hoses from under the pipes to the wind chest