Will they work for pretty much exclusively looks? I have most of my fitment dialed in ,I’m trying to get dirt nasty low 🤣🤣🤣🤣 it usually drives like a few miles at most
Wouldn’t you want the engine bay to ride a bit stiffer so it’s not bouncing around? If they compress more wouldn’t the also decompress more and make it all shaky? I think the fronts compress less because they need to hold more weight?? Idk shit though
So i just bought these for my 1997 Honda Civic Ex for my 2 back tires and if they don’t do anything, how can i cut springs from my old cars?(they’re stock) i have to get something cheap because money is an issue right now but my back is so low that the back bumper rubs on my tire and i can smell it burning. and when i go over bumps i can also hear it scrape at the bottom since it’s so low and when i’m moving at slow speeds i can hear my springs making noises..
the installation of the screw-in base is backwards, the smooth part must be installed at the bottom of the shock absorber and the screws are placed in the upper part of the shock absorber, because if you don't do it like this, later the screw-in base will break into pieces
these will work---only concern will be the quality of the springs and how well matched they are to your OEM dampers........ they're probably too stiff to be honest ----- probably
Why wouldn't it handle like a boat? Its pretty much Acuras answer to the Cadillac.... the Legend handles way better. (Still horrible in today's standard.)
Why so American say "See if we CANT"? thats the opposite. You want to see if you CAN ruin the way it drives. The same was you say "I COULD give a damn" my answer is a you could could you? well i COULDN'T give one... you saying you COULD give a damn, means... you actually could give one, whereas i couldn't.. lol
"I could give a damn" annoys me, but "see if I can't" is just meant to be used sarcastically. Obviously they're not genuinely trying to ruin the way it drives, but it might. I mean if I'm doing anything tricky a lot of times I'll say something along the lines of, "I'm just going to fuck this up real quick" when I'm obviously trying to do the opposite. Just sarcasm
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Why are yall blaming amazon? they didn't make the springs
You can cut the rear spring and use it as a spring for the sleeve.. that's what i have now. So i can fully adjust my height whenever i want.
I dont care about lowering
I want stabilty
Will they work for pretty much exclusively looks? I have most of my fitment dialed in ,I’m trying to get dirt nasty low 🤣🤣🤣🤣 it usually drives like a few miles at most
Lol dirt nasty low 🤣😂
OMG I love the Vigor! I actually want to RWD swap one someday. :)
Fun video guys. The voiceover work was especially good. Keep it up.
Thanks! We appreciate it.
Oregon gang?
Why would the rear springs compress more than the front? The engine is in the front 🤔
Wouldn’t you want the engine bay to ride a bit stiffer so it’s not bouncing around? If they compress more wouldn’t the also decompress more and make it all shaky? I think the fronts compress less because they need to hold more weight?? Idk shit though
can some one send me de link i need a set
Exactly how does the spring not hold up the rear end of the vehicle but it does the front end where both the engine and the transmission is located ?
It’s where he put the smaller springs it has 2 that are slightly thicker for the front he probably got them mixed up it happens a lot
Hows the ride and liabilities of that springs??any ratings?
Loved your video! Lmao
But they can't be used on any vehicle because I have a xa30 Toyota RAV4 I was wondering if they would fit
So i just bought these for my 1997 Honda Civic Ex for my 2 back tires and if they don’t do anything, how can i cut springs from my old cars?(they’re stock) i have to get something cheap because money is an issue right now but my back is so low that the back bumper rubs on my tire and i can smell it burning. and when i go over bumps i can also hear it scrape at the bottom since it’s so low and when i’m moving at slow speeds i can hear my springs making noises..
Go low, so you can get high! LOL
Wait are you just putting those on stock struts?
That’s what they are for
i install mine but im getting a very bumpy ride on rough road that i dont like can some one tell me how can i fix it
basically dont buy cheap suspension parts, I know it sucks I wish it were cheaper too
I have the same and it thumps like hell
Does it rub against anything ?
Hey brotha , I installed them same springs on my Honda accord , now it bounces too much , any ideas?
do you have the link to them im trying to find them?
the installation of the screw-in base is backwards, the smooth part must be installed at the bottom of the shock absorber and the screws are placed in the upper part of the shock absorber, because if you don't do it like this, later the screw-in base will break into pieces
how do u find them on amazon does it have a name
Nice!
makes it noisy
these will work---only concern will be the quality of the springs and how well matched they are to your OEM dampers........ they're probably too stiff to be honest ----- probably
Bad
Wow amazing #jensentungol car VLOGS food VLOG
Those look dangerous 🤦
Why wouldn't it handle like a boat? Its pretty much Acuras answer to the Cadillac.... the Legend handles way better. (Still horrible in today's standard.)
besides lowering the clearance can you also make it higher? or increase ground clearance or its just for lowering the car?
Fish Republic if you buy normal coil overs you can raise the case by changing the sleeve ring to a higher rate.
are these morakot ?
It's crazy that you asked about Morakot, I just bought me a set from Amazon lol.
Why so American say "See if we CANT"? thats the opposite. You want to see if you CAN ruin the way it drives. The same was you say "I COULD give a damn" my answer is a you could could you? well i COULDN'T give one... you saying you COULD give a damn, means... you actually could give one, whereas i couldn't.. lol
At least when we say "I DONT give a fuck" we mean we dont lol. But i see what you mean. We have issues tbh
"I could give a damn" annoys me, but "see if I can't" is just meant to be used sarcastically. Obviously they're not genuinely trying to ruin the way it drives, but it might. I mean if I'm doing anything tricky a lot of times I'll say something along the lines of, "I'm just going to fuck this up real quick" when I'm obviously trying to do the opposite. Just sarcasm