I do not thrust an autopilot designed by an control systems engineer who has no piloting experience and is not aware of possible failures and limits. Look for example at the case of of the vertical speed control mode used near the aircraft's service altitude, when it cannot recognize an imminent stall. 2 pilots on a repositioning flight paid the ultimate price using that mode at 41000 ft. Who designed the MCAS system for the B 757 Max? A control system engineer which is also a rated pilot would never had the pitch system enter repeated trim inputs to force the nose down in response to a single AoA sensor without cross checking what the actual attitude and CAS of the aircraft is , information available from dual computers. Worse is the total absence of a 'failure modes and effects analysis' before such a system is implemented on a real airplane.
I am trying to use the lightweight airplane design example on simulink now, but I cannot link the FlightGear to Simulink, do you know what happen? Also, is it this model available online, please?
because using unit quaternion parameters have no singularity as euler angles do for example pitch up 90 degrees. Fly a loop and watch what happens to the roll angle.
Hey, Can you tell me how to add other variant subsystem in existing model when already a subsystem is working. I want to change Simulink 3D visualization to FlightGear visualization in my block diagram under visualization subsystem.
After running the main function from the file exchange, Error using fgets Invalid file identifier. Use fopen to generate a valid file identifier. Error in fgetl (line 33) [tline,lt] = fgets(fid); Error in drawDATCOMaircraft (line 35) tempstr=fgetl(tempdat);
PID auto tune in Matlab/Simulink is valid for linear systems only. Not in non-linear systems. We need non-linear in reality.
Thank you so much for this tutorial.
I don't understand why you wouldn't share the file or show people interested learning on how to set this stuff up.
Where should I get this model?
hello,could you share this fixed wing module?
Can we use it for any type of aircraft ?
Like flying wings also ?
Can you plz post more videos MATLAB Aerospace Toolbox RELATED
I do not thrust an autopilot designed by an control systems engineer who has no piloting experience and is not aware of possible failures and limits. Look for example at the case of of the vertical speed control mode used near the aircraft's service altitude, when it cannot recognize an imminent stall.
2 pilots on a repositioning flight paid the ultimate price using that mode at 41000 ft.
Who designed the MCAS system for the B 757 Max?
A control system engineer which is also a rated pilot would never had the pitch system enter repeated trim inputs to force the nose down in response to a single AoA sensor without cross checking what the actual attitude and CAS of the aircraft is , information available from dual computers.
Worse is the total absence of a 'failure modes and effects analysis'
before such a system is implemented on a real airplane.
hello,can you share the simulink model?
I am trying to use the lightweight airplane design example on simulink now, but I cannot link the FlightGear to Simulink, do you know what happen? Also, is it this model available online, please?
have you done that already?
Could the simulink model be available to download?
did you find the download?
Very nice
How do you change the constant values while simulation is running?
with slider gain
what is gimbal?
why did you say if we use quaternion there is no malfunction ?
because using unit quaternion parameters have no singularity as euler angles do for example pitch up 90 degrees. Fly a loop and watch what happens to the roll angle.
Can u plz do fuselage analysis with matlab I need to do it on Tuesday plz help bri
Hey, Can you tell me how to add other variant subsystem in existing model when already a subsystem is working. I want to change Simulink 3D visualization to FlightGear visualization in my block diagram under visualization subsystem.
Could the Simulink model/file be available to download?
hiii, you have found the model?
Hi. Is it possible to use PX4's firmware as autopilot here? And send the Altitude and Speed commands from QGroundcontrol?
Yes it is possible
can some provide the simulink code file,
Hello , Respected sir can you this matlab file for learning ?
can you make a video about rocket pid trust vector control
thrust.... not trust
@adel mensi don't thrust him, its trust
thx
How I can regenerate flight in Flight gear simulator through recorded data in MATLAB.
After running the main function from the file exchange, Error using fgets
Invalid file identifier. Use fopen to generate a valid file identifier.
Error in fgetl (line 33)
[tline,lt] = fgets(fid);
Error in drawDATCOMaircraft (line 35)
tempstr=fgetl(tempdat);
I also encountered the same problem
sorry man, when have you found this model?
@@AC-gp9wq Did you find the model?
lock bag ton?dtc?offuzz
haaaaaaaaA