So I have gravel bike with Alfine-8 hub in it and I am looking for a clean look shifter for it, but according to your faq video it's impossible to put inter-8 barend shifter into a road handlbar. Am I right? Are those mentioned road/mtb mounts interchangeable so I can mount inter-8 shifter in roadstyle handlebar? I'd really appreciate your answer (:
Hi. All those thumb shifters have "bar clamp diameter 22,2mm". Original shifter on my bike, that I want to replace had 25,4mm bar clamp. I guess that won't fit? Do you offer bigger diameters? Isn't 25,4 a kind of standard diameter for at least drop bars?
We do not have a specific bar end shifter for it. The shifter pull of the Shimano MTB 10 speed bar end shifter is a "B" fit, some folks have had success with that.
Hey, Just got a question about the BS-M10 levers. I got a Shimano GRX rear derailleur, that is not compatible with the BS-M10 rigth lever because of the pull Ratio. I Know that the indexing will be wrong and that i need a BS-T10b but it's just doesn't exist anymore. My question is : does the BS-M10 will work on the GRX derailleur with the friction mode ? or sould i take a BS-M11 or a BS-T10 ? Thanks !
Yes, BS-M10 will work in friction mode. The only downside will be that it pulls a lot more cable than needed overall, so the lever throw needed to make a shift will be pretty short.
can they be used as downtube shifters
Nice video!! Is it possible to change the rear derailleur with the left shifter? How many gears can it handle?
can i use BS-M11R with Deore M5100 rear derailleur?
So I have gravel bike with Alfine-8 hub in it and I am looking for a clean look shifter for it, but according to your faq video it's impossible to put inter-8 barend shifter into a road handlbar. Am I right? Are those mentioned road/mtb mounts interchangeable so I can mount inter-8 shifter in roadstyle handlebar? I'd really appreciate your answer (:
Our BS-N08 shifter can be mounted on a road handlebar no problem.
@@microSHIFTTECH uff, that's so good to hear. Thank you for your respond :)
Hi. All those thumb shifters have "bar clamp diameter 22,2mm". Original shifter on my bike, that I want to replace had 25,4mm bar clamp. I guess that won't fit? Do you offer bigger diameters? Isn't 25,4 a kind of standard diameter for at least drop bars?
ваще топчик, в рф бы покупать ваше шифтеры
do you have a bar end shifter for the Advent X?
We do not have a specific bar end shifter for it. The shifter pull of the Shimano MTB 10 speed bar end shifter is a "B" fit, some folks have had success with that.
What is the difference between the 12s Sram & 12s Shimano mountsin shifters? Both seem to have same size barrel.
Different indexing spots.
Hey,
Just got a question about the BS-M10 levers.
I got a Shimano GRX rear derailleur, that is not compatible with the BS-M10 rigth lever because of the pull Ratio. I Know that the indexing will be wrong and that i need a BS-T10b but it's just doesn't exist anymore.
My question is : does the BS-M10 will work on the GRX derailleur with the friction mode ? or sould i take a BS-M11 or a BS-T10 ?
Thanks !
Yes, BS-M10 will work in friction mode. The only downside will be that it pulls a lot more cable than needed overall, so the lever throw needed to make a shift will be pretty short.
Are the (thumb) mounts not available? They’re not on your website
They are available, but we haven't added a part number to the website yet.
Can they be used with Acolyte short?
We don't have an Acolyte compatible bar end shifter, sorry!
@@microSHIFTTECH how about thumb shifter?
@@akuahsanin friction mode they shift the Acolyte derailleur just fine
Are these shifters indexed? Can they be used as friction only?
All are indexed, and the ones with a "T" in the part number are transferable to friction mode as well.
Can i use SB-M10-R with Deore XT RD-m771 rear derailleur?
Yes!
@@microSHIFTTECH Will the SB-M10-R work with 9 speeds?In friction mode too?