For an up-to-date, more polished tutorial on installing our Apollo pergola cover system, watch our newer upload - th-cam.com/video/a-_RlwiF0Fw/w-d-xo.html
Purchased the Apollo system for my two patio covers. Regal Plastics provided all the necessary accessories for a turn-key job; u-profiles, H-profiles, washers and screws, anti-dust tape, and silicone tubes. It was all included in the price quoted after giving them the dimensions and details of the projects. I will definitely use them again in the future.
So, I’ve seen so many pergola with a polycarbonate roof installed using one sheet horizontally. My problem is, my deck is 22’ x 22’ and I can’t seem to find a video that explains how to connect two sheets vertically and horizontally. It’s that to hard to do? I really need some advice from the pros. Thanks
can we get multilayer polycarbonate sheet which is completely transparent to solar radiation and blocking U V radiation for use in solar dehydrator for drying fruits crops and vegetable and who is the distributer in pakistan . kindly reply.
Because the polygal pieces don’t abut each other, how far apart are the rafters so the come out even at the outside edges? Do t you have to compensate for the width of the center gasket?
For an up-to-date, more polished tutorial on installing our Apollo pergola cover system, watch our newer upload - th-cam.com/video/a-_RlwiF0Fw/w-d-xo.html
Thanks much, very helpful guide in installing mine
Very informative installation guide. It would have been complete if a footnote given on guiding links to buy the accessories that are used.
Purchased the Apollo system for my two patio covers. Regal Plastics provided all the necessary accessories for a turn-key job; u-profiles, H-profiles, washers and screws, anti-dust tape, and silicone tubes. It was all included in the price quoted after giving them the dimensions and details of the projects. I will definitely use them again in the future.
So, I’ve seen so many pergola with a polycarbonate roof installed using one sheet horizontally. My problem is, my deck is 22’ x 22’ and I can’t seem to find a video that explains how to connect two sheets vertically and horizontally. It’s that to hard to do? I really need some advice from the pros. Thanks
What brand of silicone did you use? I know it needs to be 100% silicone
i found that drilling holes for the srews in the drainage channel started to let water in after a while
try adding a rubber washer when screwing in.
Want to know who is the dealer of Apollo and accessories product here in Honolulu Hawaii.
How do you create a slopping on a flat top.
how loud does it sound in the rain!??
Hey where can i get basing caps and such to join the sheets i have some 8mm poly sheets and need some ASAP
can we get multilayer polycarbonate sheet which is completely transparent to solar radiation and blocking U V radiation for use in solar dehydrator for drying fruits crops and vegetable and who is the distributer in pakistan . kindly reply.
very simple to install. great job Thank you
thanks Leroy!
I am doing a metal framing (14 GA), 16 ft wide x 20 Ft long can I use these sheets? What spacing between the sheets?
I placed the edge piece in a wrong way. I put the short side down and the long side up. Any problem?
It would be nice to be able to hear what he’s saying
Do you need to use that edging (U profile)
Nice.
i would of like to see you walk on it to hammer the trim on as no one can walk throw walls to hammer on the top
What is the name of the piece that joins sheets together
Can I install Solar Panels on top of it ?
I dont think polycarbonate sheets are durable enough to bear such weight.
I'm sure you could? great question though i really have no clue
what is the spacing between your rafters?
Sohrab, for our standard system, if the rafters are at 48" - then the maximimum spacing between the purlins / shade slats / stripping would be 51"
on our premium system - the maximum wide you can go is 23.625" - the maximum length wise is going to be 36" (you need to place a clip every 36")
@@chadgono4184 not if I understand the answer. I also want to know the distance between each rafter. 48" do you mean 48 inches apart?
Because the polygal pieces don’t abut each other, how far apart are the rafters so the come out even at the outside edges? Do t you have to compensate for the width of the center gasket?
subs done
I wanna know what a polygal is?... I think he means Pergola :-)
Polygal is a plastics manufacturer. Like Plexiglass