Looks pretty sweet. I would love to do this. I wish they had a keyless entry option as well. I lost my fob like a decade ago. I've had it for 18yrs lol
The key problem is a simple fix, when shifted into park, the system doesn't quiet sit properly. To fix it, jiggle the shifter in place without changing it from P and the key will release.
Sick video. I must do this. Quick question can you start the car just by holding down the clutch after you have entered accessory mode using the brake. Like if you was using the normal key access all I have to do his hold down the clutch to start the civic.
I can get a 2005 Civic for dirt cheap but it's missing the keys. Would this kit be able to help me get around the missing key or would I need to get a new key made? Rather spend $120 on this kit over $3-500 at my local Honda dealership and tow fees.
I can’t seem to get my ignition switch back on. So I’m stuck with a floppy clam shell like you said. How did you get yours to stay on there without the push start button getting in the way?
If you used the black button like I have in this video it should clear the ignition cylinder once you remove the key tumbler, and drill out everything inside of it. It's just a hallowed out mount at that point. If you upgraded to one of the other buttons, then you may have to trim the ignition cylinder to clear the new button. I've got another video on my channel where I upgrade to the red push button, and you'll be able to see better how it gets trimmed.
Yo bro I have the same Setup up never had a problem with it until today I scanned the little blue thing I went to go push the button and it doesn’t want to start my car my dash comes on my starter is new and for some reason it doesn’t want to turn the car on do you know what it could be?, my car runs if I push it and put it in gear I got a 99 civic
So I lost the key to my civic and can’t find anybody to program and get me a new key because my car is 22 years old. Can I buy this kit to replace my entire ignition in order to use my car again without the original key?
I recently installed this on my car and had the bouncy upper/lower steering wheel cover as you mentioned. So you stripped out all the internal parts of the key cylinder right? To be able to use as a bracket again so with it being stripped it cannot lock the steering wheel?
I just checked for you on their website & they don’t have one for the 2015 unfortunately. Only up to the 2007. Seems like Most of their products are focused on old models
If you were sick with it, you could install the fob activator pad in your centre console, that way when you sit in the chair as long as the keys in your right pocket it will activate it. But that’s not necessary. Swiping it quickly is easy enough. You could also install it under your cup holder which I’ve seen someone do so when they put their keys in there it activates. But yeah installing a push start is pointless regardless. It’s really just a cool novelty item & something to make an old car feel a bit more high tech
@@WilliamCroninhe had a problem where his key gets stuck and could possibly 1 day be jammed forever , he solved his problem and did something different for a hit video🤷 not too pointless in his case
I’ve got it linked in the description of the video. It’s from Jordan distributors. And the push button start has to have a RFID chip in order for it to be started. It’s included in the kit. You have to swipe the RFID “key” over the scanner in order to activate the push button start.
You can leave it if you want to but you will have to drill a hole for the push button somewhere else, that way you can keep the lock. And as far as keeping the key in your pocket. It only takes one second to scan once you’re in the car. You dont have to scan it when you are leaving because it automatically locks after like 30 seconds so no one can power it on. Its definitely better than nothing.
If you’re sick with it, you can install the fob receiver in the centre console that way it activates when you sit down as long as the fob is in your right pocket. But that would take some extra work. Easy enough to just swipe it before starting the car
The entire point of push to start is not having to dig in your pocket or bag to get your key out.... with this kit you still have to pull the fob out and scan it then start. Defeats the purpose.@@darme7o
We love this system. Really affordable. We installed it on our 95 F150 that we coyote swapped as well. Great stuff.
That was extra work . Didn't have to take the steering wheel off
He said that in the video.
@@fireinthehole72a q6
@@kapilsharmashow6687 huh?
Looks pretty sweet. I would love to do this. I wish they had a keyless entry option as well. I lost my fob like a decade ago. I've had it for 18yrs lol
Removing them tamper proof screws really got to me😂 such horrific sights
I have their push button start in my EM2 civic, have had it for a while. Good Call
I just got my EK 2 weeks ago, I need to do this! thanks!
@Abnormal Garage dude this is such nice add on. Definitely getting this for my EK 👍🏻👍🏻👍🏻
That’s awesome, I need to do this with my civic
The key problem is a simple fix, when shifted into park, the system doesn't quiet sit properly. To fix it, jiggle the shifter in place without changing it from P and the key will release.
I like Killer century car
Brooo!!!! Do my Honda too 😅😅 that is soooo coooool
Just ordered mine. Yeeee
That's awesome. I love this
Need more ek content
Working on it 👍
Sick video. I must do this. Quick question can you start the car just by holding down the clutch after you have entered accessory mode using the brake. Like if you was using the normal key access all I have to do his hold down the clutch to start the civic.
I wish they had an option for a 2009-2015 Honda Pilot, they only have an option for the first gen Honda Pilot.
If i want to start my car up in the winter from inside this wont work will it ?
So you have to use those little blue things so get it to work? And does remote start work with this?
Good job
Ill definitely do this on mines
Nice… I am going to order one for my S14…
Can you use this kit if your transponder is faulty? Does it replace it is what I guess I'm asking. Thanks in advance
Just curious. When you hollowed out the old ignition. The slider piece that locks your steering wheel. How did you get that part out
Doing this but placing fob reader under cup holder
I can get a 2005 Civic for dirt cheap but it's missing the keys. Would this kit be able to help me get around the missing key or would I need to get a new key made? Rather spend $120 on this kit over $3-500 at my local Honda dealership and tow fees.
well you would still need a key to lock/unlock it
@@bede9099 you can order replacement keys/cylinders for the doors/trunk but getting it started is what matters most.
Hope I don’t mess up when I install this in my 2000 civic ek
What about the other way. How to take a push button start vehicle and put in a traditional key system
Thats a lovely upgrade...👍👍👍can you supply the website or email address to contact JDi for this kit....Red for me sir👍
I've got it linked in the description 👍
@@AbnormalGarage i see it now👍
I can’t seem to get my ignition switch back on. So I’m stuck with a floppy clam shell like you said. How did you get yours to stay on there without the push start button getting in the way?
If you used the black button like I have in this video it should clear the ignition cylinder once you remove the key tumbler, and drill out everything inside of it. It's just a hallowed out mount at that point. If you upgraded to one of the other buttons, then you may have to trim the ignition cylinder to clear the new button. I've got another video on my channel where I upgrade to the red push button, and you'll be able to see better how it gets trimmed.
Yo bro I have the same Setup up never had a problem with it until today I scanned the little blue thing I went to go push the button and it doesn’t want to start my car my dash comes on my starter is new and for some reason it doesn’t want to turn the car on do you know what it could be?, my car runs if I push it and put it in gear I got a 99 civic
So I lost the key to my civic and can’t find anybody to program and get me a new key because my car is 22 years old. Can I buy this kit to replace my entire ignition in order to use my car again without the original key?
I have an ek 97, when removing the key cylinder, the two screws no longer fit into the plastic cover. how to fix that problem
can I do this to my vw polo? does it need a specific module ?
Will this same exact kit work on an automatic transmission car?
Yes
Mate ???? Obviously you don't Watch Scotty Kilmer ? I had same problem! Sprayed key with WD40 then insert in ignition problem solved 😂
Hey I don't see airbag in your steering wheel, what happen?
I recently installed this on my car and had the bouncy upper/lower steering wheel cover as you mentioned. So you stripped out all the internal parts of the key cylinder right? To be able to use as a bracket again so with it being stripped it cannot lock the steering wheel?
Correct, the steering wheel cannot lock once the cylinder is completely stripped out. It’s just a mounting piece for the clamshell at that point.
and i left all my screws in 😂
I have a question what about the steering wheel lock ????
There isn’t one anymore
So you still need to splice one wire?
Do they have one for a 2015 Honda Pilot? I'm planning to buy one soon and would like to install it.
I just checked for you on their website & they don’t have one for the 2015 unfortunately. Only up to the 2007. Seems like Most of their products are focused on old models
I have noticed that the RFID tags are weak in most of these kits which is a bummer.
It’s intentionally weak
Does it works in jeep Wrangler 2008
so..... you still have to take a "key" out your pocket, swipe it, wait for a beeps then start? This seems more annoying that using a key.
thats almost pointless. still have to swipe the key and not just have it in pocket
If you were sick with it, you could install the fob activator pad in your centre console, that way when you sit in the chair as long as the keys in your right pocket it will activate it. But that’s not necessary. Swiping it quickly is easy enough. You could also install it under your cup holder which I’ve seen someone do so when they put their keys in there it activates. But yeah installing a push start is pointless regardless. It’s really just a cool novelty item & something to make an old car feel a bit more high tech
Agreed, having to physically scan the FOB defeats the purpose of push to start
It’s not pointless, it keeps thieves from being able to take advantage of well known security flaws with these ignition cylinders
@@omegamonkey5080 ok but generally you are in installing for aesthetics
@@WilliamCroninhe had a problem where his key gets stuck and could possibly 1 day be jammed forever , he solved his problem and did something different for a hit video🤷 not too pointless in his case
Where do I order how do I keep people from stealing if you don't need a key?
I’ve got it linked in the description of the video. It’s from Jordan distributors. And the push button start has to have a RFID chip in order for it to be started. It’s included in the kit. You have to swipe the RFID “key” over the scanner in order to activate the push button start.
Did you really just say "Bill Fold"? Lol
does this make it anti theft? or its still easy to steal?
I think its easier to hot wire
Is there a why to not make it beep?
I’m not sure if you can stop the beeping
What year is that civic?
2000
11:21
Kinda disappointed you cant leave the fob in your pocket and that it doesnt have a motor to lock the wheel
You can leave it if you want to but you will have to drill a hole for the push button somewhere else, that way you can keep the lock. And as far as keeping the key in your pocket. It only takes one second to scan once you’re in the car. You dont have to scan it when you are leaving because it automatically locks after like 30 seconds so no one can power it on. Its definitely better than nothing.
If you’re sick with it, you can install the fob receiver in the centre console that way it activates when you sit down as long as the fob is in your right pocket. But that would take some extra work. Easy enough to just swipe it before starting the car
The entire point of push to start is not having to dig in your pocket or bag to get your key out.... with this kit you still have to pull the fob out and scan it then start. Defeats the purpose.@@darme7o
Stop talking so fast
Brooo how did you drill it out the lock. I’m stuck I have everything but that main pin in the middle
bad move maing it that the next thing will be my car got stolen