First Prints and First Impression - Anatol Titan M Automatic Screen Printing Press
ฝัง
- เผยแพร่เมื่อ 14 มี.ค. 2020
- We've printed our first prints and give our first impressions of the Anatol Titan M Automatic Screen Printing Press
mikeydesigns.com/product/scre...
Art Proof Approval Template - mikeydesigns.com/product/art-...
Adobe Software Discounted (Illustrator, Photoshop) - bit.ly/Adobe-Photoshop-CC-Scre...
Use our link for your Amazon purchases to help support our channel: amzn.to/2oZJRO4
My Amazon Wishlist for gear I need to step up this channels creativity...
amzn.to/2m6OSpR
For custom screen printed shirts:
Call Us! 281.883.4889
info@mikeydesigns.com
mikeydesigns.com
Find us on:
Facebook - / mikeydesigns
Instagram - / mikeydesignssilkscreen
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Music: Not Too Cray - Huma-Huma • Not Too Cray - Huma-Hu... - แนวปฏิบัติและการใช้ชีวิต
![[UNCUT] รัฐสั่งหยุดปล่อยคลื่น! แต่หยุดพลังปะทุ “น้องหญิง” ไม่ได้ I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/RmQh47eIiV0/mqdefault.jpg)
We got some of our first prints under our belt! We also give our first impression of the press. I'm sure I may have missed something... what do you feel I missed?
Mikey Designs & Silk Screen Hey Mikey, hope you are doing well. I have some pretty big customers that I can probably send you business. Would you be open to giving me commission on orders? If so, how much percentage can you offer?
Actually, you have my number and you can text me there if you are interested. Just thought I would throw it out there! Talk to you soon!
@@chrmil007 Hey Chris! I'll text you.
@@chrmil007 Could you text me. I can't seem to find the number. New phone since we last texted.
I like those camos! What brand n # is them! Me likey Mikey!
This is crazy. I just started at a print shop and we have this machine and I was looking for videos to help me learn/understand it faster and this video was the first I looked at. That first design you printed is for my all time favorite music artist Pretty Lights. Such a fantastic coincidence!
I’m not jealous at all! 😭. Nice to see it running and can’t wait for a multi -color print video
LOL! You know we'll be sure to post some multicolor jobs. I'm looking forward to doing a 8-9 color job.
my experience with my titan is don't use the step back. use the cycle mode (revolver) insread. My biggest learning curve was with the quartz flash. start with temp setting of 3.5 (no higher) then start with 8 sec or so then move down once the pallets get warm. I messed up many shirts getting going. I'm happy with mine 3 years in and making money. Good luck.
Thanks for sharing! I'll definitely take that into consideration as I get more comfortable with the machine.
So Kool,Im a screen printer,OldSkool,That Machine is 👍 awesome
press looks awesome matt in action great job
Thank you! More to come soon!
Congratulations. I can smell the smell of that new press😍
Settimo Elemento Thanks! Lol...
nice to see the press up and running
Thank you! It's great to be back up and running.
Pin holes. :3 5:14 is my favorite treat.
Great sounding and looking press
ARNOLD PRINTS thank you! I’m loving the sound of the servo index and how quiet the squeegee are. The electric hum though 🔥
I truly love printing
Awesome!!! We do too. :)
Hey Mikey! Great work!! Just wondering what size your pallets are and where you got those black test pallons to fit it?
OMG the tech geek in me is sooooo fascinated by this, thanks for sharing. I plan on building a one station press. obviously not this flash as your beast, but it is good inspiration for me.
You and me both! I would love to see how the press comes out. My first press was homemade.
Great video! Anatol seems like a good choice. 👍🏻
Thanks! We're loving it thus far!
You look so comfortable using the Red Beast it fits you perfectly and it didn't look like you had any problems to me! Great video Matt and thanks for sharing Stay Blessed...that red looks good in your shop ;)
Thanks, Denise!!! Haha, still learning it a little bit, but it was easy to pickup for the most part and we're loving the red in the shop!
Great video 👌🏾
Good stuff Matt!!
Thanks, Senad!!!
awsome video
Thank you!!!
Im so happy for you guys! Rock on brother!!!!🤘🤘🤟🤟
Thanks, Jay! I appreciate it bro.
Veeery Nice robot dear Mikey !!!Congratulations for the achivement, brother !!!
Thank you!!!
This looks so sick! Also that ONE OK ROCK hoodie she was wearing! Great band 😎
Thanks! Haha, she loves One OK Rock.
Hello Mister Mickey great entrepreneur congratulations great deals take care 👍👏👏👏👏👏👏
Thank you! Take care as well and let us know if you have any questions.
It Looks Sooooo Awesome!!! And looks like it came with a 20x20 iPad LOL!! Imma have to make a trip to see it in person...
LOL! You're always more than welcome to drop by!
Nice! Congrats! :)
Thanks, Gina!
I finally see it in action
More to come too!
Nice work
Thanks!
When I printed on 100 percent poly camo, I used silicone ink and it cured at a low temp but also the white looked like it had bleed through but then became bright white, it was amazing stuff it works on only 100 poly but you could look into that too.
Nice! We have some silicon samples in the shop I'm going to try.
COOL VIDEO
Thank you!!
I would highly suggest going with either M&R or ROQ if you are looking to buy an automated screen printing press. Since day one I've had nothing but problems with my Anatol Titan. They use cheap parts and things are constantly breaking down.
We have had no problems.
you must have had and put in a lot of hours practicing cause it looks like your a natural on that touch screen very nice machine way to go
Thank you!!! It has just been an easy machine to pickup. Still learning honestly how to keep up with it. lol. We have about 1,500 prints on it so far.
Ive been thinking of seeing if i can get side clamps for mine, because i believe they would take the problem of things getting out of registration out of the picture.
Give them a call. They should hook right up to what you have.
Any problems with the squeegee sliding out of angle? We use 20 degrees and if there’s any slight amount of too much pressure, it just flops back to 30. Seems better after anatol replaced all our squeegee holders for us though. On more than 2 color jobs, we find cycle mode best since the ink stays too hot. You find that too?
No problems with the squeegee sliding out of angle. They held like a champ. I ran that 3rd job with the hot pink and gold shimmer on cycles. I didn't run into any issue with the ink staying too hot. I'll report back if I run into any issues. Thus far, I'm very happy with it.
Some tri blends will cook like bacon, depends on the brand next level black heather are the worst. On the Sabre I heat the platens up and then a turn the flash to 2.8 seconds then drop it .2-.4 seconds every 15- 20 shirts until I get to 1.5 seconds at 44- 51 dozen per hour. On the MR they have an automatic sensor to keep them from burning bad but I haven't worked on very many new MRs presses.
Thanks for the tip! The Rapid Wave has a temp sensor. I'll let y'all know if I run into any burning issues.
Good Video! On the fence about getting an Anatol with the 9th head setup like yours that swings out of the way. Now that you've had your Titan for a while do you think that 9th head was a good option or you don't use it often?
Nice! We love having the feature. Helps with large runs that don't need more than 7 colors. It allows us to have a loader and unloader to get the job out quickly.
@@mikeydesignssilkscreen473 Thanks man appreciate it
One stroke cures at a low temp, it's expensive but cures at the lowest temp. But I think you also need the lowest bleed ink you can get. Sometimes you get those shirts that are like a pigment dye screen printed fabric, a zim gun will take out the dye those need like a gray blocker base but they still can bleed through on transfers, ink and vinyls, it blows.
I have some one stroke. We love it. I'm guessing it's because these are sublimated. I bought some armor / gray ink from Wilflex which I'm going to give a try.
enjoy majke hahaha tuns of textil
What mesh count do you do the camos on? I did a little over 200 of them and the dye that's used does not play well with the inks...lol step back/revolver mode is pretty helpful when you have a small job and don't want to make 2 screens.
I agree! Which is why we gave the step back function a try. I was using 200 mesh. We've had issues in the past with some camo shirts. I got some Armor Wilflex ink I'm going to give a try. Was $150 for the gallon eek.
@@mikeydesignssilkscreen473 I only use it for runs 100 and under. I still manage to do about 300+ per hr like that. Flash on 2.5 sec and squeegee at a speed of 5 and takes about 1min to do a full round until the 2nd pass,so 12 shirts off the press every 2 min.
@@crumptees Awesome! Thanks for sharing!
Careful with the "Step Back" feature. I stopped using it because once the pallets are hot, you can accidentally cure the ink in the mesh because the step back happens so fast.
I'll have to keep an eye on it. Thanks!
We are considering the Anatol titan. What part of yours pneumatic? Is it just the lifting motion of the carousel?
Just the lift and squeegee pressure.
Why not use a highlight white screen and fly through that first job? Step back mode seems hella slow. Might as well print them manually lol.
LOL! We were a little behind on keeping screens ready due to the press move.
Mikey Designs & Silk Screen been there! Looks like a nice set up. Looking forward to seeing more.
@@woogdesigns Thanks!!! We're loving it and more to come soon.
I used to sell Anatol machines. Why did you choose the Titan instead of the vault? Just curious.
It was just the next stepping stone and already had a compressor.
@@mikeydesignssilkscreen473 I sold a bunch of them. They are well put together and you get a lot of bang for your buck.
what do you use for adhesive ?
I use spreadable water based pallet adhesive.
Good day Mikey!
Greetings from The Philippines🇵🇭😇
May I ask how much is the Anatol machine.?
Hi! We paid 52k.
Where can I get some shirts am nt living in the US cnt get a retailer permit
I'm not sure out of the US.
No offense bro but you look like the kid from little rascals the "uhuh" kid!😊😊😊😊🙏🏽💪🏽💯 mad love bro
LOL! I'll have to check it out because it's been a while since I've seen the rascals. Thanks bro!
How is the machine holding up for you one year in?
Great! still running like new. Just a little... inkier lol.
Nice now you have a new one how about the old one.
Thanks! We sold it and it was damage during shipping :(
Your titan is ASA or ASE?
ASE.
I see u made some money,lol.
Good man!
LOL! Thanks Larry!
Are these all electric machines
The Volt is. Our has an air lift and air squeegee cylinder to apply the pressure, but the squeegee carriage is adjustable with turn knobs.
what's the cost?
You'll have to talk with Anatol.
You did not us a bleed blocker on them
?
On Camo shirts you need a bleed blocker so it doesn’t migrate
how much this thing cost???
Reach out to Mike or Ken at Anatol! Great peeps and they'll hook you up with current pricing.
price?
It was about 52k at the time plus shipping / install fee of $4.5k.
How much does it cost???
Give Mike at Anatol a call. I'm not comfortable sharing the cost but they would be happy to get you a quote.
@@mikeydesignssilkscreen473 contact
nescon advertisement try Mike or Rick!
nescon advertisement I just let Mike from Anatol know to share his info. He’ll be in touch ASAP.
Is that Floyd Mayweathers Logo on the wall?
No. It's a singer in Vegas named Frankie.
Looks heavy. Expensive and lot of stuff to do lol.
LOL! I can't deny that.