@@cristianomaker I manage to make it to work but it only detects when the metal touches the wire and not when it is nearby? How do I fix this. Could you please help me?
@@RandomEditsCo Hi Daniel, do you tried with a larger metal object? Also, check if your coil as really only 10cm in diameter, it seems in the image you sent me to have a little more.
@@tommyamvs9828 well, I don't know if an "active" buzzer is different from a "normal" buzzer but I think you can try adding it without any change to the code because the code just sets what pin is used and if it is on or off.
Hi, I suggest you to read this post, because it will explain better than me the process behind how Pulse Induction detectors work and also how Arduino interprets the results: create.arduino.cc/projecthub/mircemk/diy-arduino-based-pulse-induction-metal-detector-c6f244
Olá esse detector ele tem deferência for de metais
infelizmente não tem
Boss kalau nyoba benda kecil bukan yang gede, kalau kurang gede cobain roda mobil
Awesome! I suppose this project requires to amplify the signal capture...
My LED doesn't turn on but the built-in LED turns on randomly. How can I make the LED turn on, it's not working.
Could you send me an email (to: thefireworksblogapp@gmail.com) with some picture / details of how you are doing it? Thanks!
@@cristianomaker ok
@@cristianomaker I manage to make it to work but it only detects when the metal touches the wire and not when it is nearby? How do I fix this. Could you please help me?
@@RandomEditsCo Hi Daniel, do you tried with a larger metal object? Also, check if your coil as really only 10cm in diameter, it seems in the image you sent me to have a little more.
hi , the buzzer isn't mentioned in the diagramme , where can i place it
Hi, just replace the LED by the buzzer. Thanks!
@@cristianomaker thank you , by the way what if an active buzzer is the only one available for me , do i have to change the code ?
@@tommyamvs9828 well, I don't know if an "active" buzzer is different from a "normal" buzzer but I think you can try adding it without any change to the code because the code just sets what pin is used and if it is on or off.
@@cristianomaker thank you , will do
Can you please explain how this detector tells the arduino that it has discovered a metal ?
Hi, I suggest you to read this post, because it will explain better than me the process behind how Pulse Induction detectors work and also how Arduino interprets the results: create.arduino.cc/projecthub/mircemk/diy-arduino-based-pulse-induction-metal-detector-c6f244
Can you make a tutorial about this please?
Please check it here: cristiano-diy.blogspot.com/2021/01/simple-arduino-metal-detector.html
@@cristianomaker You are the best man. :)
Mere ko gift Dena bhaiya
😡😡😡
Hi friend, can I help you with something? Thanks!
فاشل غير مسموع وقصير مدا
يب