kiora ,can i do the same to 2008 sangyong actyon sport ,got given one and found out why months later it had no ecu plugged into it ,changed the ignition barrel , the dash lit up but wouldnt turn over ,done the old starter terminal and other battery connection ,it winded over but wouldnt start with the dash lights on, i think the immobilzer light was flashing without the ecu in it ,i just need it for my small farm as its been out of rego for a few years, a good paddock basher to chase the cows
Hi Mate, you said what you did, can you elablorate on HOW or at least what tools you used? That would be really helpful. I know its possible, but taking the next step is what I need to do to flash off my problematic imbiliser in a 2012 Hilux KUN16
Hi mate saw you yputube about delete imobilaizer off 1kd engine I have problem with my Pickup it start but died after 3 sec Could it be imobilaizerand how to delete this could uou send me more info Thx
I have exactly the same thing on a 1999 1kzte prado . Can this be done on mine ? Unfortunately I'm in Gibraltar southern Europe. Can equipment be purchased to so ?
Im seeing thia alot around the world. The 99 prado runs a different system to the later ecus and requires a different way to sort however so this technique does not work to my knowledge. Its more like the 1uz vvti immo defear system we use.
Gday mate So I’m here in the middle of an NT remote community in Australia with two Hiace vans with the same trouble. Earth the TC wire for 30min with ignition on, come back and disconnect earth wire and it will start. That it ?? For real ?
In the video I saw if you want to swap ecus then you can align replacement ecu to vehicle by bridging TC to ground but of coarse you require a working immobilizer system to do this. You can't align components when there is a fault with any of the systems. As you see in the video I had an immo fault and flashed the immo off the ecu rather than repairing the immo system. Cheers
The 2003 is likely to be the older immo system which I have videos on the removal process as well. So yes, the immo can be removed on the JZ ecu as well. Cheers Kelvin
I've just swapped out my ecu and key reader and key. Only problem is as you stated about reflashing emmobilser is an easier fix rather than pull the whole dash apart . You explain this in your tutorial but not how to do it.
kiora ,can i do the same to 2008 sangyong actyon sport ,got given one and found out why months later it had no ecu plugged into it ,changed the ignition barrel , the dash lit up but wouldnt turn over ,done the old starter terminal and other battery connection ,it winded over but wouldnt start with the dash lights on, i think the immobilzer light was flashing without the ecu in it ,i just need it for my small farm as its been out of rego for a few years, a good paddock basher to chase the cows
Hi Mate, you said what you did, can you elablorate on HOW or at least what tools you used? That would be really helpful.
I know its possible, but taking the next step is what I need to do to flash off my problematic imbiliser in a 2012 Hilux KUN16
Negative. Its a service I provide. Cheers
@@CartuneNZ No worries I will email you about the service. All ok I understand, I run a small business myself so not a problem, happy to pay.
@@CartuneNZ lol ok then
Hey, How do you flash the ecu? I have the same issue in a 2013 Toyota Hiace.
Hi mate saw you yputube about delete imobilaizer off 1kd engine
I have problem with my
Pickup it start but died after 3 sec
Could it be imobilaizerand how to delete this could uou send me more info
Thx
Hey how do you flash the ecu, I have the same issue in a 2013 hiace
Hey my hilux surf is missing a wire going from the ecu to the ignition how would I find out what wire I'm missing
Using some wiring diagrams might be a good place to start
@@CartuneNZ because my truck will crank over but won't start
It had a kill switch in it
@CartuneNZ my ecu is not powering my hilux what can I do to fix this problem
@@brendoncooper5330 have you turned the switch on??
I have exactly the same thing on a 1999 1kzte prado . Can this be done on mine ? Unfortunately I'm in Gibraltar southern Europe. Can equipment be purchased to so ?
Im seeing thia alot around the world. The 99 prado runs a different system to the later ecus and requires a different way to sort however so this technique does not work to my knowledge. Its more like the 1uz vvti immo defear system we use.
I have problem with Hi ace 2kd engine after changing a computer box it start then it die a few second what I do to solve the problem
Did you align the ecu and immobilizer?
Gday mate
So I’m here in the middle of an NT remote community in Australia with two Hiace vans with the same trouble. Earth the TC wire for 30min with ignition on, come back and disconnect earth wire and it will start. That it ?? For real ?
Depends on what the fault is. To swap to another ecu and match immo to van that works on later hiace and hilux.
I’m trying to eliminate the immobiliser. Gscan3 tool says key is talking to immobiliser ok but immobiliser isn’t talking to ECU.
In the video I saw if you want to swap ecus then you can align replacement ecu to vehicle by bridging TC to ground but of coarse you require a working immobilizer system to do this. You can't align components when there is a fault with any of the systems. As you see in the video I had an immo fault and flashed the immo off the ecu rather than repairing the immo system. Cheers
Could this immobilizer delete be done to a lexus gs 300 2jzge vvti stock ecu 03 model
The 2003 is likely to be the older immo system which I have videos on the removal process as well. So yes, the immo can be removed on the JZ ecu as well. Cheers Kelvin
@@CartuneNZ cheers i will keep you in mind might be doing a jz swap with a standard ecu
pls can u show me how u flash of 1kd
immobilizer?
I can gladly reflash your ecu. At this point in time I have no plans to do more videos on this topic.
How do I identify tc and ground
A quick search of an obd2 connector shows position.
how do you flash it off
I have tuning software which I use. Cheers Kelvin
What’s exactly TC?
Its a terminal in the diagnostic plug. Stands for timing check.
@@CartuneNZ which pin from the obd is,do you remember ?
@@manthoscupra4387 pin 13, ive just done another video on the topic. th-cam.com/video/zJMC4xl4FkI/w-d-xo.html
I've just swapped out my ecu and key reader and key. Only problem is as you stated about reflashing emmobilser is an easier fix rather than pull the whole dash apart . You explain this in your tutorial but not how to do it.
Flashing off the immobilizer is a service that I provide. Cheers Kelvin
@@CartuneNZok..I need that service now but the problem is im on the other side of the globe... In Iceland... Can you work around that?
Hey, did you hear that Mark Watson from South Africa passed away?
Yes, very sad. No more morning chats while we both worked. I will miss him.
Kelvin, we weren't offered this engine in the US market as far as I know... Does it have enough torque for a decent occaisional off-roading vehicle?
Correct, these didn't make it to the usa. Yes, quite a torquey engine. They go nicely.
Hello. What tool did you use to delete the Immo please?
I use software on my laptop with a reflash cable. This is a service which I provide for paying customers. Cheers Kelvin
Hey, How do you flash the ecu? I have the same issue in a 2013 Toyota Hiace.
Reflashing the ecu is a service I provide. People send me their ecu, I reflash and send back, or they bring me the vehicle