Thanks for the video. Can't wait to see some of the machine in action. I would really like to see the shredder blade and some others that you don't have yet on your machines. Just have to be very careful with some of the blades. I've even had a machine shop make some custom ones for me.
Hi csabi , that is a beast of a machine. Great video. Looking forward to seeing it in action. Spring here in Australia, so the brush cutter will be in action soon here too.
Hello, thanks yes it’s really powerful I already have 2 videos with the brushcutter in action, here in 2 months it’s winter , I wish you a good job for the incoming season, greetings 🙋♂️
Your videos are 👍 good. Like you, I prefer Stihl strimmers to Husqvarna. I saw your FS300 on another vid. I have a FS400. To be honest I prefer older Stihl equipment over the new stuff. It's not quite the same build quality. As you come from Romania, lookout for Dracula. Stay safe my friend.
Hello, thanks I really love Stihl tools specially, brushcutters I worked with Stihl fs 400 really great machine, the old models they are definitely good but with the new models I will see in time how they will perform, greetings from Romania.
Hello , the only trimmer head that’s fit this machine it’s the Stihl Autocut 56-2 , 🙋♂️
3 ปีที่แล้ว +2
Faină achiziție . Acest model il visez și eu.. dar va apărea în ordinea priorităților. La primăvară presupun că o să o vedem în sarcină cu fir de 4mm în iarbă de 50cm + . Felicitări ptr achiziție.
Salutare Ionut este o motocoasa super asa la prima impresie, o sa o vezi mai repede in sarcina cu firul in iarba mai uscata ca deja este sfarsitul sezonului si cu alte accesorii 🙋♂️spor in continuare.
The new Stihl need to open grease screw??? In the stihl told me NO but i dont think so , I see a litle screw there. If is yes, which screwdriver should I use to?
Hello, yes the new Stihl models they have a greasing screw, and yes we have to grease it, but I never open it because I don’t have the key, ( we need a special key to open it) ,🙋♂️
J'ai apprécié la débroussailleuse shil 561 parce que sa capacité peut faire mon affaire,mais c'est beaucoup cher pour nous qui débutons, c'est une machine que je rêve à obtenir
@@CsabiTools Nem baj. De egy nagyon jó kis Stihl gépparkod van ritka látvány az ilyen. Biztos hogy sok pénz benne van. Én is szeretnék majd magamnak egy ilyen kis Stihl gépparkot de ez nem megy olyan gyorsan. Az fs 491 es kasza lesz az első Stihl gépem.
@@CsabiTools cudi me da su dali takav remen uz trimer inace se mora sve posebno kupiti svaka cas sto volite toliko snimati i malo vremena na to potrosti od toliko posla
@@CsabiTools Megértelek, én is így vagyok vele! Csak én láncfűrészekbe rakta elég sokat !
3 ปีที่แล้ว +2
Oh, so now I know for what is needed that spring - it's for handle bar screw. Anyway, those new harnesses looks nice and dandy but low quality plastic parts, only after 4 month of use it is started braking, the black back part and shoulder "butterfly" part. :(
Hello, I have another harness like this I bought it over one year ago, and the plastic parts are in very good condition, this is a forestry harness and I use it only when I'm working with the big brushcutters,greetings.
3 ปีที่แล้ว
@@CsabiTools Ok, thanks. I am using it on my FS 490, almost always on grass cutting. Probably would a better choice an FS 410 because 490 too heavy.
@ I have my oldest harness from Stihl 15 years old and I can work with it without no problem, you are working a lot with your harness, how many hours a week?
Hello, in one hour off work it consume 1 fuel tank, it has a fuel tank of 990 ml , in a whole day it’s depends on how many hours you work with it, 🙋♂️
Buna domnule csabi. De unde ai achiziționat motocoasa? De pe ce site străin.si ce faci cu atatea motocoase? Scuze daca te-am supărat cu intrebarea mea.
@@nicolaslab1814 sigur mergi in Germania la o reprezentanta Stihl si o cumperi, daca nu o au in stoc cu siguranta ti-o pot comanda ,mie mi a luat-o o cunostinta.
Szia ,nekem egy 450 esem van a régi sorozatból de nagyon jó,ugy képzeld el hogy még a karbit se kellett szétszedni soha pedig tobb mint 10 éves.és sokat vágok másoknak is nem csak magamnak.akarok majd egy ilyet is,mi a tapasztalat?
Hello, nekem is van egy régi Fs 300-as gepem kb 20 eves es szinten nagyon jol mukodik. Az Fs 561 es egy nagyon jo gep nagyon eros nagyon jol elvegzed a munkadat vele, csak azt kell figyelembe veni hogy sokal nehezebb mint a te Fs 450-es geped ha egy egesz napot dolgozok vele faj egy kicsit a valam de amugy egy fantasztikus gep, 🙋♂️
Salut Ionut are mai multe chestii, reductor inbunatatit cu posibilitate de ungere diametru mai mare de tundere cu capul cu fir etc puterea , consumul, greutatea sant la fel 🙋♂️
Hi Csabi can you send me the box dimensions please ? I try to find it online but I didn't get it unfortunately. Asking because need it for parcel company . Many thanks and keep up the good work . Greetings from Ireland
Salut da le pastrez pentru mine, toate sculele de pe canal sant cumparate de mine , schimb nu am cum sa fac am deja Fs 560 oricum nu este f mare diferenta de putere intre ele Fs 561 vine cu mai multe inbunatatiri.
Asi vrea un schimb 560 cu tine pentru ca a mea e mai veche un pic e din 2018 asi da o diferență dacă ne-am înțelege eu ma ocup de curățenie spatii verzi
When you carefully fold the plastic bag and put in your pocket, won my full respect. Thanks for share
Your welcome, greetings.
Só fez isso pq ele tava gravando
My favorite brushcutter, congratulations brother and colleague
I totally agree with you, thanks George greetings my friend.
Awesome! I just ordered one with the 40-4 Duro Cut head. Thanks for sharing the un boxing video.
I’m glad you like the video, it’s really an amazing machine and really powerful, I wish you good job with your machine,🙋♂️
I did the same mate, fancy exchanging numbers so we can keep in touch with how we getting on with it, Iv newly started my own gardening company
E tanc da și grea, astea pe la pădure la defrișări se folosesc cel mai des din câte știu 🙌🙋♂️
Salutare, in toate situatiile dar in special la defrisat padure etc ,da asta e cel mai mare tanc de la Stihl, salutare 🙋♂️
I enjoied very much this video. Thanks for speaking in english , i Like your english because it is easy ti understand.
Hello, thanks, I’m glad that you understand me , greetings 🙋♂️
Good afternoon, I bought a stihl fs 561 c-em in April.
Hello, it’s a good and powerful machine, you won’t be disappointed with your purchase,🙋♂️
Hello, I am from the Dominican Republic. This machine is not very heavy to work with. I have a Stihl fs 380.
Hello , it has more than 11 kg , if you will work an entire day, it’s heavy,🙋♂️
Thanks for the video. Can't wait to see some of the machine in action. I would really like to see the shredder blade and some others that you don't have yet on your machines. Just have to be very careful with some of the blades. I've even had a machine shop make some custom ones for me.
Hello, thanks yes I’m very excited to try it in the field,i will try it out with all the accessories that I have, greetings 🙋♂️
@@CsabiTools х
Hi csabi , that is a beast of a machine. Great video. Looking forward to seeing it in action. Spring here in Australia, so the brush cutter will be in action soon here too.
Hello, thanks yes it’s really powerful I already have 2 videos with the brushcutter in action, here in 2 months it’s winter , I wish you a good job for the incoming season, greetings 🙋♂️
Whether it is available in India?
Your videos are 👍 good. Like you, I prefer Stihl strimmers to Husqvarna. I saw your FS300 on another vid. I have a FS400. To be honest I prefer older Stihl equipment over the new stuff. It's not quite the same build quality.
As you come from Romania, lookout for Dracula. Stay safe my friend.
Hello, thanks I really love Stihl tools specially, brushcutters I worked with Stihl fs 400 really great machine, the old models they are definitely good but with the new models I will see in time how they will perform, greetings from Romania.
Primu..... sa ai noroc de ea💪💪💪
Multumesc, salutare 🙋♂️
thanks.I also want to buy such a handicraft, but they have not yet been delivered to Russia as I buy, I will see what the configuration will be.
Ok, good luck with your purchase 🙋♂️
Super tare motocoasa asta 👍felicitări ✋
Multumesc, da este super abia astept sa intru cu ea in iarba, salutare
@@CsabiTools it is the best sthil machine i have ever seen greetings from indonesia
Hello Mr Csabi ! Its the FS 561 machine is confortable to wear with XTREE stihl harness or its painfull ? Thanks a lot !
Hello, yes it’s confortable I’ve been working 6-7 hours with it but after a while I feel a small pain in my shoulders, greetings,🙋♂️
Hello,
Can you mount a trimmer head on this cutter and will it support a .170" gauge? Thanks
Hello , the only trimmer head that’s fit this machine it’s the Stihl Autocut 56-2 , 🙋♂️
Faină achiziție . Acest model il visez și eu.. dar va apărea în ordinea priorităților. La primăvară presupun că o să o vedem în sarcină cu fir de 4mm în iarbă de 50cm + .
Felicitări ptr achiziție.
Salutare Ionut este o motocoasa super asa la prima impresie, o sa o vezi mai repede in sarcina cu firul in iarba mai uscata ca deja este sfarsitul sezonului si cu alte accesorii 🙋♂️spor in continuare.
The new Stihl need to open grease screw??? In the stihl told me NO but i dont think so , I see a litle screw there. If is yes, which screwdriver should I use to?
Hello, yes the new Stihl models they have a greasing screw, and yes we have to grease it, but I never open it because I don’t have the key, ( we need a special key to open it) ,🙋♂️
Man that jacket is awsome 👌
Hello, thanks 🙋♂️
Que hermosa maquina saludos desde Argentina aqui no solo se se encuentra la stihl fs 280
Hello, 🙋♂️
J'ai apprécié la débroussailleuse shil 561 parce que sa capacité peut faire mon affaire,mais c'est beaucoup cher pour nous qui débutons, c'est une machine que je rêve à obtenir
Salut, oui tu as résonné c’est une très bonne machine et très puissant moi-même j’ai le utilise pour couper des grande herbe ,🙋♂️
Muito top.. pena que no Brasil nao tem pra vender 😢
Enjoy the new tool📣📣 man🙌🙌
Thanks my friend 🙋♂️🍻
Qué hermosa máquina cuantos litros consume y cuánto revolución tiene el motor por minuto gracias
Hello, thanks, it has a fuel tank off 990 ml and it’s last for about one hour, ,🙋♂️
Show de bola, essa roçadeira.
Love this vídeo
Hello, thanks Marina greetings.
Szia Csabi. Az fs 491 hez is adnak xtreeam válhevedert?
Hello, azt hiszem hogy csak az Fs 561 adnak ,vetem 511 es nem kaptam x-treem valhevedert,🙋♂️
@@CsabiTools Nem baj. De egy nagyon jó kis Stihl gépparkod van ritka látvány az ilyen. Biztos hogy sok pénz benne van. Én is szeretnék majd magamnak egy ilyen kis Stihl gépparkot de ez nem megy olyan gyorsan. Az fs 491 es kasza lesz az első Stihl gépem.
@@vectronbarat sok sikert kivanok az elso gephez es munka erot ,🙋♂️
hi, was the ADVANCE X-Treem belt included? The ADVANCE PLUS Belt is written in the equipment
Hello , yes the advance x-treem harness was included with the Stihl Fs 561-C.
@@CsabiTools cudi me da su dali takav remen uz trimer inace se mora sve posebno kupiti svaka cas sto volite toliko snimati i malo vremena na to potrosti od toliko posla
Hi, Is it possible to attach any other trimmer head on to FS561 C-EM, other than one you have shown in your video?
Hello , everything that we can attach on the old Fs 560 we can attach also on the new Fs 561 ( trimmer head, circular saw blade, brush knife ),🙋♂️
Helló Csabi! Nagyon komoly gép az Fs 561c ! Gratulálok hozzá👍 Jó egészséget kívánok!! Ja és első like az enyém👋👍
Szia Andras, koszi szepen viszont kivanom ,igen ez a legbrutalisabb fukasza a Stihl-tol, alig varom probajam ki udvozolek 🙋♂️
@@CsabiTools Kicsit irigyellek👍 Ilyen gépekkel nem minden nap találkozik az ember!
Tejesen igazad van nagyon sok penzt bele fektetem, akartam hogy mindenbol legyen egy kicsi, 🙋♂️
@@CsabiTools Megértelek, én is így vagyok vele! Csak én láncfűrészekbe rakta elég sokat !
Oh, so now I know for what is needed that spring - it's for handle bar screw.
Anyway, those new harnesses looks nice and dandy but low quality plastic parts, only after 4 month of use it is started braking, the black back part and shoulder "butterfly" part. :(
Hello, I have another harness like this I bought it over one year ago, and the plastic parts are in very good condition, this is a forestry harness and I use it only when I'm working with the big brushcutters,greetings.
@@CsabiTools Ok, thanks. I am using it on my FS 490, almost always on grass cutting. Probably would a better choice an FS 410 because 490 too heavy.
I’m using it mine only with the big brushcutters Fs 511 560 561, with the smaller ones I use the regular harness.
@@CsabiTools Those regular harnesses not so great too, wears out after a season.
@ I have my oldest harness from Stihl 15 years old and I can work with it without no problem, you are working a lot with your harness, how many hours a week?
इस मशीन को उसे करने पर पूरे दिन में कितना फ्यूल लग जाता है कृपया बताएं?
Hello, in one hour off work it consume 1 fuel tank, it has a fuel tank of 990 ml , in a whole day it’s depends on how many hours you work with it, 🙋♂️
Salutare .fain "Panzer" ai achizitionat.Cum ti se pare canistra ? poti depozita benzina mai mult timp in ea?Mersi
Salut, multumesc,canistra e ok toata vara am avut in ea benzina fara nici o problema.
@@CsabiTools Mersi. Salut
Salut ! De unde cumperi motocoasele ? In România 561,560 nu se găsesc și 511 doar la comanda și vine in 6 luni
Salutare, Fs 560,561 le-am luat din Germania, Fs 511 anul trecut din Romania
How much is it and can you provide the link for order online
Hello the price it’s between 1600-1800 € , unfortunately I don’t have any link because I bought it from a store in Germany,🙋♂️
@@CsabiTools - Okay , thank you
Salut Csabi dă.mi un sfat....la acest model se poate sa ii pun o freza ....am de frezat pe lângă pomi.....
Salutare, acest model nu are nici un fel de accesoriu pentru frezat,🙋♂️
Can i use it for tiller??
👍👍👍
Greetings 🙋♂️
💪💪💪✌✌✌
🙋♂️
Sya oke
Buna domnule csabi. De unde ai achiziționat motocoasa? De pe ce site străin.si ce faci cu atatea motocoase? Scuze daca te-am supărat cu intrebarea mea.
Buna nu m-ai suparat deloc, este direct din Germania adusa , lucrez cu majoritatea pentru mine, nu cu toate deodata 🙋♂️
Super tare scula !Felicitari,e cumparata de pe un Site de incredere din Ro?daca nu e suparare ca intreb.mult spor in ceea ce faci.bafta.
Salutare, nu este suparare deloc este cumparata direct din Germania dintr-o reprezentanta Stihl, multumesc te salut 👋
@@CsabiTools îmi poți spune și mie cum se numește acest site și care este prețul curierului pînă în romînia?
@@vasilepradais1005 salutare este cumparata direct din Germania din reprezentanta, de catre o cunostinta nu am cumparat-o online.
@@CsabiTools Aa eu credeam că ai luat-o de pe un site ceva😅😅
Si no estoy equivocado esas motoguadañas son de procedencia Alemania fabricados ahí
🙋♂️
Best
🙋♂️
Una pregunta cuanto d revolución tiene
Hello, if you mean the price, it’s around 1500 €
Qual modelo tem injeção eletrônica?
@@ricsantana20 yes
GERMANY brushcuter STIHL FS 561 verry good.❤.
Yes indeed,🙋♂️
👍
🙋♂️
do you run, it in? break in
Hello first time when I’m going to work with it, with the first two fuel tank I will not work on full throttle ,🙋♂️
De unde ai cumparat-o? De pe ce website? Salutare din Satu Mare.
Salutare din Zalau, direct din Germania dintr-o reprezentanta Stihl am cumparat-o .
@@CsabiTools Deci pot s a ma duc direct la un reprezentant stihl si de acolo se poate comanada?
@@nicolaslab1814 sigur mergi in Germania la o reprezentanta Stihl si o cumperi, daca nu o au in stoc cu siguranta ti-o pot comanda ,mie mi a luat-o o cunostinta.
@@CsabiTools multumesc foarte mult pentru ajutor!
Cu placere 🙋♂️
They are going on the beach 🏖
🙋♂️
Szia ,nekem egy 450 esem van a régi sorozatból de nagyon jó,ugy képzeld el hogy még a karbit se kellett szétszedni soha pedig tobb mint 10 éves.és sokat vágok másoknak is nem csak magamnak.akarok majd egy ilyet is,mi a tapasztalat?
Hello, nekem is van egy régi Fs 300-as gepem kb 20 eves es szinten nagyon jol mukodik. Az Fs 561 es egy nagyon jo gep nagyon eros nagyon jol elvegzed a munkadat vele, csak azt kell figyelembe veni hogy sokal nehezebb mint a te Fs 450-es geped ha egy egesz napot dolgozok vele faj egy kicsit a valam de amugy egy fantasztikus gep, 🙋♂️
@@CsabiTools akkor megvan az az érzés mikor ugy elfáradsz h alig birod a gépet visszacipelni….nekem volt mar parszor
@@deaklaszlo6749 en ep enyire nem faradtam el de volt egy par alkalom hogy jol el faradtam.
Ce are in plus fata de 560? Cumva alt angrenaj?
Salut Ionut are mai multe chestii, reductor inbunatatit cu posibilitate de ungere diametru mai mare de tundere cu capul cu fir etc puterea , consumul, greutatea sant la fel 🙋♂️
@@CsabiTools
Da, are cuplu mai mare din câte am citit eu.
Posibil inca nu am avut timp sa ma documentez cu toate detaliile.
You do the lawnmower huh, ???
🙋♂️
Bu makinayı nasıl alabilirim bana yardım cı olurmusun fiyatı ne kadar
🙋♂️
Ship Vietnam ?
Hello, I don’t know my friend , you have to search an online store that’s deliverers to your country,🙋♂️
4Stroke or 2stroke,please....and price. ..?
@@luckykongor5608 2 stroke and the price it’s 1500 €
@@CsabiTools okay,Thank you ❤️🙏🏻.
Doamne power fs561 …vreau …Imi place
Salutare, si mie imi place e superba 🙋♂️
Where did you buy it?
Hello I bought it from Germany, in a Stihl store.
@@CsabiTools Online shop?
No , someone bought for me in a Stihl store.
machine stihl is the best
I totally agree with you, greetings 🙋♂️
All I can say is 😲
Thanks 🙋♂️, greetings
thx
Hello, 🙋♂️
Na ez komoly szerkezet, mennyibe kerül?
Koszi, 1600 € kerult.
@@CsabiTools az ár is komoly 😅
Az is 😅😅😅
Hi Csabi can you send me the box dimensions please ? I try to find it online but I didn't get it unfortunately. Asking because need it for parcel company . Many thanks and keep up the good work . Greetings from Ireland
Hello, yes 180 cm long, 35 cm large, and 30 cm high, good luck with your purchase,🙋♂️
Thanks so much for your quick respond 😉 helps me a lot
What the hp
Hello 2,8 kw -3,8 hp
Tôi muốn mua những không biết giá trị nó bao nhiêu tiền vậy
🙋♂️
Please help me for buy this
HP i formation ? +Ccm
Hello, 2,8 kw 3,8 hp and 57,1 cm3.
@@CsabiTools fs560 c-em 3.8 hp 😲 new 561 2.8 hp ? hmm easy new
Sorry my mistake, 3,8 hp also Fs 561
Berapa harganya harnes XTreem itu,
🙋♂️
@@CsabiTools price harnes XTreem
Tu ce faci cu motocoasele după ce le faci prezentarea
Dupa ce le fac prezentarea urmeaza sa le introduc la lucru sa vad cum functioneaza pe teren.
Și după ce le faci proba le păstrezi pentru tine
Am și eu un560 nu am putea sa facem un schimb saunu știu cum sa te intreb
Salut da le pastrez pentru mine, toate sculele de pe canal sant cumparate de mine , schimb nu am cum sa fac am deja Fs 560 oricum nu este f mare diferenta de putere intre ele Fs 561 vine cu mai multe inbunatatiri.
Asi vrea un schimb 560 cu tine pentru ca a mea e mai veche un pic e din 2018 asi da o diferență dacă ne-am înțelege eu ma ocup de curățenie spatii verzi
A chainsaw that wanted to live its life as a weedwacker🤣
Hello, yes indeed 😂😂😂
no Brasil custa quanto😮
Hello in Europe 1300-1500 €.
magyarul is tudsz?
Hello, igen 🙋♂️
how much, 2000 Euro? :)))))
1500-1700 €
@@CsabiTools wow..
Хотелось бы теперь версию этого видео на русском языке...
🙋♂️
I sent you an email. Please check.
Hello I didn’t receive nothing.
Vaskos egy dög! Kár, hogy nem gyorszáras az üzemanyagtartály, sokkal jobban szeretem mint az old school tekerőst.
Hello as biztos,neha az igaz hogy nehezen nyitom ki foleg mikor meleg van, ez egy nagyon komoly gep 🙋♂️
I have sabre brand 🎉😅
Hola
Hello,🙋♂️
E3
🙋♂️
TERRIBLE MÁQUINA!!!
Hello, yes indeed my friend,🙋♂️
👍👍👍👍
Salutare 🙋♂️🍻
@@CsabiTools sanatate numai bine !
La fel iti doresc si tie 🙋♂️