OMG i spoke too soon on someone elses vid... THIS IS the Vid I needed! I needed to find how that spring and white plastic piece went together! Thank you so much!
Bill, another issue that would cause the symptoms you are getting, is if the Tank Vent is clogged. The tank would gradually build up a vacuum as the fuel is sucked out by the fuel pump, then when the vacuum reaches a point where the fuel pump diaphragm cannot pull more fuel, you will get a stumbling in the engine as it is starving for more fuel. Replace your fuel filters and Tank vents every year.
nice to see another repair video. would love to see you put a small shop in your shed maybe with some tools and a pancake air compressor.or maybe a add on to the shed. anyway i still love these types of videos.
Maybe worth changing the accelerator pump in the carburettor! It's behind the brass plug near where the throttle cable on you don't have to take the end caps off to get to it. It's a small piston with an oring on it and they wear out!
Any Stihl part you can possibly name is expensive, especially on the line trimmers, I have if I remember right, a FS85 trimmer that has a cracked gas tank, (bought it that way from previous owner). I priced a new one from a Stihl dealer and about fell over, what the tank listed for I could almost purchase a complete trimmer, it was listed at $93.00 USD, 3 years ago, for a piece of plastic that weighs less than a pound and that was without the gas line, filter and gas cap. I ended up heat welding the crack, it still has a slight leak but at least I can trim everything in yard before it runs out of gas.
HI BILL, TRY TAKING SPARK ARESTER OFF MUFFLER. EITHER CLEAN IT OR THROUGH IT AWAY. RUNNING IT AT HALF THROTTLE WILL PLUG THE ARESTER FASTER THAN NORMAL. I RUN MINE THE SAME WAY. MINE WAS PLUGGED UP AND I THROUGH IT AWAY AND IT RUN LIKE NEW!!! GOOD LUCK
Smashing bill, i enjoyed that :-D Those carbs are so cute, and that one does not look old at all, it's got to be the evil ethernol causing all the problems. Mike sounds like a nice man :-D. Bills New "Table Top Tech" :-D.
Bill if you want gas without ethanol go to the boat marina they don't put ethanol in boat gas at least they don't in the town next to me here in southwest michigan or check the internet in your area for ethanol free gas.
a friend of mine gave me a snowblower cause he was moving and brought it to me while i was at work, and my employer said it is now property of the business because it was given to my at my place of employment while i was clocked in.
The Carb manufacturers say you shouldn't use the ultrasonic cleaners because they will strip the coating off the carb and make the metal permeable and cause fuel leak problems. They say you should just use the spray type carb cleaner and spray it down good.
OMG i spoke too soon on someone elses vid... THIS IS the Vid I needed! I needed to find how that spring and white plastic piece went together! Thank you so much!
Miss these type of vids so much from you. But we will always support any vid you put up Bill.
Nice to see you back repairing again
Love your videos keep up the great work your pall D-man
Hey Billllll
So good to see you happy and well
Hey Bill! Good to see you work'n on stuff! :-)
nice to see repair video again from you bilsstnow we learn again that was missing
Bill, another issue that would cause the symptoms you are getting, is if the Tank Vent is clogged. The tank would gradually build up a vacuum as the fuel is sucked out by the fuel pump, then when the vacuum reaches a point where the fuel pump diaphragm cannot pull more fuel, you will get a stumbling in the engine as it is starving for more fuel. Replace your fuel filters and Tank vents every year.
that is a good point you say about
nice to see another repair video. would love to see you put a small shop in your shed maybe with some tools
and a pancake air compressor.or maybe a add on to the shed. anyway i still love these types of videos.
Excellent video Bill, good to see you making this kind of video. Either that carb is really small or you have giant hands. Keep up the good work!
small carb lol
It is nice to see you Bill..
Maybe worth changing the accelerator pump in the carburettor! It's behind the brass plug near where the throttle cable on you don't have to take the end caps off to get to it. It's a small piston with an oring on it and they wear out!
Any Stihl part you can possibly name is expensive, especially on the line trimmers, I have if I remember right, a FS85 trimmer that has a cracked gas tank, (bought it that way from previous owner). I priced a new one from a Stihl dealer and about fell over, what the tank listed for I could almost purchase a complete trimmer, it was listed at $93.00 USD, 3 years ago, for a piece of plastic that weighs less than a pound and that was without the gas line, filter and gas cap. I ended up heat welding the crack, it still has a slight leak but at least I can trim everything in yard before it runs out of gas.
1/4 the price of a new machine go figure that
it's nice to see you doing a repair video but can't complain about a law abiding citizen
HI BILL, TRY TAKING SPARK ARESTER OFF MUFFLER. EITHER CLEAN IT OR THROUGH IT AWAY. RUNNING IT AT HALF THROTTLE WILL PLUG THE ARESTER FASTER THAN NORMAL. I RUN MINE THE SAME WAY. MINE WAS PLUGGED UP AND I THROUGH IT AWAY AND IT RUN LIKE NEW!!! GOOD LUCK
i have a baja 5 b running on a 32cc 2 cycle enging i had to rebuild it once.
Smashing bill, i enjoyed that :-D
Those carbs are so cute, and that one does not look old at all, it's got to be the evil ethernol causing all the problems.
Mike sounds like a nice man :-D.
Bills New "Table Top Tech" :-D.
Bill if you want gas without ethanol go to the boat marina they don't put ethanol in boat gas at least they don't in the town next to me here in southwest michigan or check the internet in your area for ethanol free gas.
a friend of mine gave me a snowblower cause he was moving and brought it to me while i was at work, and my employer said it is now property of the business because it was given to my at my place of employment while i was clocked in.
that doesn't seem right
rick looper tell them that works both ways then and if something of theirs becomes yours because you are clocked out at the moment right?
You should get yourself an ultrasonic cleaner, they work awesome to clean the carb parts & they are pretty cheap
that's what i was wondering about
The Carb manufacturers say you shouldn't use the ultrasonic cleaners because they will strip the coating off the carb and make the metal permeable and cause fuel leak problems. They say you should just use the spray type carb cleaner and spray it down good.
Hi bill
you mad a box for the stihl in crod cald you can find on facedook david shireman
Bill you should ask the board of directors to film in the cemetery again
Don't think that will ever happen. Sorry
Become a member of the board of directors Bill :-)
maybe could you bring the 2032r and 110 tlb up to your house
Daniel, don't be so selfish, bills channel is different now, but he still makes good videos, just appreciate how much bill has entertained you.
Daniel Martone that is not going to happen
good show kid
bill take spark arrestor out of exhaust 15mm socket normally on still burn carbon of wire brush and blow out will run like new again
I take them out when there new
Yea corn fuel based
Hi
i seriously think you should just be able to film in the garage with the big doors shut
What about the little screen on it Mabe that's dirty
what has happend to the channel the cemetery destroyed it for you
bill should buy couple more shipping containers fab them together to do some garage videos in the containers
dunderland241 I agree
Yes about 80 percent it has.
Ethanol ruins kaskets
sure does. dries them out fast