Budget DIY Moving Car System For Your Model Railroad. Part 1 - Proof Of Concept.
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2023
- I want Moving Trains AND Moving Cars on my New HO Scale Layout. Magnorail is beyond my budget, so lets see if we can create something ourselves.
All parts I use are listed bellow:
Pulley Gears: amzn.to/43b4uIo
12V DC Motor: amzn.to/3qfkmeB
Tiny Magnets: amzn.to/3C03awa
Bicycle Chain: amzn.to/3oxk1Do
If you'd like to support Scottrails, I have created an Amazon Wish list, and a Patreon Page.
Amazon: www.amazon.ca/hz/wishlist/ls/...
Patreon: / scottrails - แนวปฏิบัติและการใช้ชีวิต
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
You really need a geared motor. PS the 3 point turn when you changed polarity was excellent!
For the tension use one of the jockeys fixed inside the chain run by a weak spring attached to the board. You would need a U shaped bracket to attach to the jockey with enough room for the chain to run through it. I appreciate a drawing at this point would be useful…
Who needs drawings when we have overactive imaginations, lol.
Fumbling with making a comment, as they said in the movie ‘the graduate.. “plastic!”…. In this case if (big if) they make a Teflon tape that’s reasonably priced that might be solution to the chain friction issue.
FYI the plumbers white tape is teflon, and really cheap.
I felt like for a homemade magna rail and a first try it done a really good job.
Ducting. Alternate cuts to curve
Lego do a plastic chain
Extra cog on slider to act as tensioner
Glue magnets onto chain too
I did something similar with jockey wheels and a short chain with a control knob(wood disc) and used it to operate a scratchbuilt turntable.
I admire your spirit of adventure. You always demonstrate the fun available by this hobby. Thank you.
Advice: At 12:40 - When attaching a wire to a screw connection - wrap the wire CLOCKWISE around the screw so it pulls the wire into the screw rather than pushing it out as you tighten it!
Thanks Steve. I normally do that, and did do it with the red wire.
You're doing what I have been thinking about for a while now. Recently, at the ventura train show, I saw a working concept of using a TV screen to imitate moving water with moving boats. I like your idea for the roads, but wear and tear on the road (let alone the autos) is something I consider as well. (I should add, the boats on the TV screen were actual models attached to a rolling motorized frame that was guided by an optic that followed a moving blank spot on the screen...it was pretty cool)
That is FANTASTIC! That really works well! Thanks for sharing!
Nice idea, a lower ratio geared motor might help make it run smoother. Like the idea that the vehicle can be placed anywhere along the chain. I have used a plastic chain with magnets glued at various points. I found that by using clear acetate strips under the chain it reduced noise and friction. I also use sleds with pins which slot into different vehicles.
Dave fantastic works great
Nice work mate. Always been a fan of engineering my own solution to stuff and this looks like it'll work well. Looking forward to the Mk2. Ben.
Love the plan, looking good.
I have magnarail it a great system and it has everything you need start with cheap system add as you need 😉
All my respect from the far Greece. Bravo again.
Brilliant !!! good work. I liike your videos. Thank you!
very cool Dave
This will work better for o scale since it’s bigger and heavier. Gives me great ideas. Well done thank you
A freaking genus idea! Everything on my layout will be moving!!🤣
loved the different idea. i think if you use either bigger gears, or maybe 2 or 3 smaller gears to build a turn, that the cars will follow much better. or a much stronger magnet that really grabs on. Last idea would be to fix steering weels as the car now only wants to go in a straight line. ow and build in a speed reduction in some way as you dont need the full amount of RPM from the motor.
LIke the concept..waiting to see how it develops
Cool video!
I have designed something for my Christmas village people somewhat similar about 8 years ago. Today I gave perfected my system. Instead of vehicles I use people. It has taken me a long time and my any versions to perfect it. Mine is dead silent much easier to put together.
So please tell us how?😊
Love your creativity!!!! 🙌🏽 this is going to be amazing when it’s done!! 💕
Very interesting concept, I'm impressed with your ingenuity!
An excellent proof of concept Dave, it works, fine tuning to go, but I'm sure you'll nail it when it comes to putting it on your layout. All the best. Brian @ The Angels
Fabulous, well done
Fantastic‼️ Better with reduction. But you definitely have the idea
Great video, love the concept. Cheers
Congratulation. You’ll get it figured out. 🎉🎉
Nice one!💯✌️
What you could do for pulling the car along is a method similar to actual magnet rail track. They use a a little copper strip with the end turned up to put the car on and thin magnets on copper strip, not attached to the car. Making the copper strips would be easy. Just take a piece of solid copper wire from 14 gauge house wire and hammer it out flat. You might get 2 pieces from the same length strip of wire.
I saw a video of a guy making this 3 years before Don did his, but it wasn't in English. But easy to follow
Great concept. Maybe some strips of aluminium foil or waxed paper glued to the board under the chain will reduce the friction and noise? I think using tension to raise the chain will put too much pressure on the sprockets and you'll get other issues.
Great explanation, thanks!
Use a plastic / pvc U channel as a chain guide gives less friction & noise reduction 😊
Thanks for you video. I had the same idea a few years ago having seen magnorail and have been searching for a plastic chain, bit like lego use , but as yet no results. I was to be using a geared motor with a 1-2 mm pvc foam road bed 😊 Dave
That pretty cool 🤠
Add a little spring chain tensioner to take up the slack
Great bit of ingenuity from a fellow Scot. Cheers Euan
Thanks Euan.
Sounds interesting...
Foam double sided tape holding malamine strips down may do the trick. Rub a candle on the malamine to act as a lube. The chain may run better then.
What a fun video and great idea!!! All Sub'd up, looks like a great channel! -Ken
Thanks Ken.
I know you will IMPROVE this idea, and will be interested to see your Solution. As Scotsmen are PROFICIENT in Solving Situations. THANK YOU for Inspiring me with this for my layout.
For those that do not know what 'uncanny' means, it means not tinned.
I’m doing this for a HO scale dark ride. My loop is comically smaller, and only 3 chain sprockets.
My biggest issue is what to use as a ride car… The foam idea, with magnets, seems like a great option. But, I would use some sort of guide to make sure to keep everything on track.
Dear Scott, cool experiment, proof of concept already achieved. Humbly think you’ll need a channel on both sides of the chain. Just enough to keep the steel pins of the chain from touching the wood. Next to that, am also wondering if such a channel can provide support for the motion of the chain with less cog wheels? Maybe even with some bearings adjusted to the height of the chain. Anyhow, love this project. Looking forward to your next episode. Cheerio
Thanks Vincent. I was thinking of using something like electric wire conduit to channel the chain, but it might be too noisy. I know it can be made to be quiet, since a bicycle doesn't really make any noise when you pedal, so I know it's possible if I can just remove the friction.
try a motor with a gearbox. It will give you more torque at lower rpm
I think the motor is ok, it's just getting caught up in the misaligned sprockets. I'll have another update soon. Thanks for the suggestion.
@@ScottRails Glad to know there will be a Part 3 then! 😄
So, if you shim up the chain, so its not touching anything, add extra jockey wheels, as has been suggested as sprung jockey wheel to add tension. Think derailleur.
Make longer chains with soft links.
Excellent proof of concept.
I'm going to head to Home depot and see what slidey channeling they might have. I don't think I can avoid the chain laying on the ground. I would need a huge amount of tension, which would require an extreme motor with fancy bearings yada yada. A derailleur is a fine idea, but it's just something else to take up space.
Thanks for your ideas and nice comments.
Making longer chains is easy. You just need a bike chain tool to push the pins in or out.
I have a tandem bike with 3 chains and store bought chains are never the right length to start with.
Great intro! Love all your intros actually. This is absolutely incredible. Great job. Seems to work well. All you have to do now is figure out how the car makes a right turn. Lol.
I have bigger plans, once I iron out the details.
Bravo Bravo Bravo🎉
I always wondered why I was saving a bicycle chain in my mechanics tool box for over 45 years. Lol. How about duck tape strips under the traveling chain to quiet it down. Need a thinner top material
hi ,you could try a spring loaded bracket from the motor to a piece wood under the chain.
I was thinking, these tiny motors could push a car along an under-road coat hanger wire with a mgnet on the front to guide small cars. The cars could be looped through random routs and drive into a garage for rechsrging a small onboard battery.
You need a motor with reduction, so It have more force than speed, your motor is the opposite, it have more speed than force.
Might be worth using the sort of channelling that is used for routing electric cables as your plastic base for the chain. Works for me! Greetings from Portugal.
Thank you, I was thinking the same thing.
Lol back to the drawing board reduction gear for motor drive so motor spins in better running range and larger sprockets for chain corners so the transistion in direction is more gradual and as you pontificated a less resitant surface for chain to run on lol or plastic chain ... also properly mounted motor so its driving square to chain ... great idea needing more developement ... but also given an addition for my Z guage coffee table railway lol thumbsup for your efforts
Thanks for this. I just 3D printed a large sprocket for the motor, but are you saying I need a small sprocket for the motor, and maybe larger sprockets for all the "corners"?
I can still use the larger sprocket for maybe a roundabout though, right?
@@ScottRails A larger sprocket will make the chain go even faster. You need to match the motor speed with the chain speed, ideally a gearbox. Running a motor too slow makes lower torque and power making it harder to move the chain. Those old controllers usually work by putting a resistance in series with the motor this makes the motor power even lower at low speeds (and the motor wants to take more current, heating it more). A feedback controller would be better and would hold a constant speed much better. To run the chain on PTFE sheet would be better.
You have inspired me with your video, I am going to try this idea with plastic chain, and sprockets. Trouble is I am not up on electrics, so what motor is best and what mains controller do I need. Thanks Dave
I wouldn't want to advise you on the motor, since it's a potential fire risk, but I would try and match your power supply with the motor. If you're using a plastic chain, then presumably you won't need such a heavy duty motor like I'm using.
You just don't want to be running more volts through your motor than it is rated for.
To use a smaller geared motor and Is a belt. If you're concerned about slippage you can always use a tooth belt and tooth gears. The point is a built's not gonna make the noise and a gear reduction. Small motor is gonna be much quieter than a larger motor running at low speed.
Hi, amazing work chap, but i just thought, have you ever tried lego chain systen and gears??
Take care and have a great day!
I work for a company where some units use chain drives and the chain has a gutter type support to keep the chain level on unsupported areas.
That's the gutter I'm looking for. Where can I find it?
@@ScottRails Try square section cable trunking
been trying to work this out in 0 scale
What scale of cars do you need for O scale?
Hi Mate, You may want to try with geared( with Reduction gear) motor so that you will get more realistic slow speed operation and better speed control.
Thanks for the advice. It's sort of on hold till I sort out my track layout. Ripping it up and starting over.
Nice A4 cabrio!
Nice work Dave, just a thought when placing the magnets on the cars try to make the magnets level with the bottom of the tyers of the car and some kind of C channel to run the track in, I think as a tensioner I would just elongate one of the corner holes ? and maybe some form of lub as in INKOX may help ? ( something that won't affect the plastic channel)
Cheers Mark
Thanks Mark. I think I will need some channeling anyway if I want more of a sweeping bend, so I need to work on that. For the tension, I need to get it away from the motor shaft.
A belt would me quieter, but I don't know how well a magnet could be attached to it.
Yes, a belt would be better, but then we're talking industrial conveyor system, and then we're back to high budget.
@@ScottRails Timing belt? Pretty cheap due to the 3D printer crowd. Route a channel in plastic sheet, Polypropylene is slippery or that plastic cutting board plastic. Been thinking about it since I just saw Luke Towan make one with a bicycle rider.
@@babbagebrassworks4278 yeah, it was that Luke video that made me want the system. I honestly thought it was a real cyclist hehehe. His video work is also first class.
@@ScottRails I thought it was real too, with one of those fancy lens that turns real life shots into model shots. Luke's work is extraordinary, modeling and vids. Because he is Ozzie he uses stuff I can maybe get locally too. But on a budget I like low cost solutions as shipping to Downunder is crazy.
Looking good so far! Did you ever do part 2 are you coming to the port hope show this month?
I have been putting it off because I knew I wanted to change the layout, which is what I will be starting this week. I didn't know about the Port Hope show. I'll look it up.
@@ScottRails cool, man! Looking forward to it
Maybe the tension piece off of a bicycle would help take the tension up don’t know if it would be to big though???
I like your thinking. Keep the ideas coming.
OH NO NONO you must have the curve of the wire follow the direction you turn the screw to tighten( clockwise) watch the black wire install but atleast your timmies order was correct
You're not the first to mention this, lol.
sorry sir , I tried to add something from your wishlist but it produced an error. Can't a glaswegian Buy a fellow glaswegian sumit fae Canadian Amazon?
Thanks for trying. Sometimes there are restrictions on what you can buy depending on the laws of that land. And yes, I know that makes no sense considering I added it on the Canadian Amazon, but you are in the UK, so it gets confused.
Use an idler
Dave maybe you can make some C channel with the plastic making machine and then put some lubricant into it to quiet it down a bit????
I think once I get the chain tensioned, it won't make that horrible noise.
Beautiful, well done
where to get chain and gears?
Any bicycle shop...or Amazon.
bicycle
I can see illegal drag racing starting soon
hahaha, yes, I was thinking the industrial area might need some illegal shenanigans going on.
🎉🎉🎉🎉👋
Yup you've been here long enough double double and a Boston cream lol😂
Magnorail lawyers…………Cease and desist sir!
I don't think they have anything to worry about quite yet, lol.
Part 2?
I'm getting there. I need to take care of the area beyond it first.
Is it just me or what? does he look like Tucker from Grange hill, ?
Someone said that about me a long time ago. Was it you? Lol.
Strong southern accent you have. Must be from Alabama.
Close
You need a real sprocket, those are just designed for keeping chains straight not torque.
You are absolutely correct. My wife just bought a new 3d printer, so I can make my own, yay!
It good but by the time ⏲️ you spend the time and money 💰 to do that you could order a magnarail system from the states with all of the stuff you need in the box 📦 it would be about the same price or cheaper less headache
Unfortunately not. I have done the math. Basic kit, plus tax, plush shipping to Canada is close to $400. Remember, when you look at the price online, that's in American Dollars. Then you add tax, then shipping, then tax on the shipping, lol.
You can install a tensioner