You got your ruckus ...im try to get mine also i want gy6 90mph..im from nyc,if you have any link for it in nyc would love to stop at the shop to able to look at them and able to buy me one
Slim razor man 90mph is very hard to get and when you get to that level you have to worry about fixing the motor very often since it isn’t reliable at all. Basically like the 232cc. They are cool but not reliable. Reliability wise I’d say 171cc and if done right with ported head and tuned it can do around 80.
Burnout Bobby ...okay no plm do yall know any link for dem ruckus in NYC SO I CAN BUY ONE AND 80 MPH IS NOT PLM ALL I CARE I WANT ME A RUCKUS JUST LIKE THAT ..PLS CAN I GET THE LINK
Slim razor you will have to search craigslist for a full build. There won’t be a link for one all done up as a complete bike. To do the swap is about 1600 then it’s really up to the build as to were you go with it. They are very versatile
Great channel. Also came from motonosity....I know you alrdy have your ruckus built but I would love to see a frame up ruckus build from you...preferably with that 171 u where talking about. Like the one on TRS website. Would like to learn more on what exactly the parts do as far as the wiring goes. Keep up the great videos!
Rob Conway haha thank you. I’d love to do a complete build as well but that will cost me around 6-8k to do another like mine. So I’ll need more followers and make some funds off of TH-cam to get another build like that in the works. I’d love to do another in the future. I’ll be building my met in the next few weeks but still 49cc
Burnout Bobby no worries...I know how it is. Definitely looking forward to future vids. I plan on starting my frame up ruckus soon. Will prob be ordering most parts from you guys. Btw...how fast IS that 171 on TRS site?...looks very tempting...is it pretty reliable or high maintenance like other high performance motors
Rob Conway I’ll get better builds and videos to come and be more entertaining. I appreciate the sub. The 171 is reliable like the 150. It will probably do around 70 ish out the box but with tuning it and dialing it in it will do mid 70s. If you port the head it can get to high 70s low 80s with tuning.
Burnout Bobby...don’t wunna bore you but I def plan on installing an a/f gauge to get a good tune. (Would be a good vid). Would also love to see a vid on installing an oil cooler....you will be the 1st one cuz I can’t find one.
Rob Conway air fuel is really simple. Weld the bung to the pipe and you just need a power and ground for the af gauge. The tuning is the fun part lol. I don’t run oil coolers since it’s not really needed unless you go over 200cc in my opinion. I’ve ran these motors for over 200 miles a day without cooling issues so I’d say don’t use one and keep the setup clean 👍🏻
Hey man, digging the channel. About time someone has more up to date ruck content. Your ruck is sick too bro...very clean. Pretty much the same setup on mine. So I dunno if you'll even get this but Spring is around the corner and I'd like to loan wolf it without worrying. Im on LI in NY and last season I was having some serious fuel delivery issues. If the ruck sat for a day or two then the fuel would back out of the line. Then when I wanted to start her up again it would take forever to get fuel back to the carb. Sometimes even when I ride it'll shut off from lack of fuel. Anyway, I'm this close from getting an electric fuel pump and trying that but I feel like that may be a bad idea. Any ideas you could throw my way would be appreciated. Thanks.
Michael Staton could be one of three things. One is that the fuel pump diaphragm might be bad and need a rebuild. There may be an vacuum leak and another thing to do once you figure out the cause is get a fuel check valve.
Burnout Bobby def not the pump...bought a brand new one and the same issue. As far as a vacuume leak, how can I check that? Could it be the fuel filter by any chance?
Michael Staton doubt its the fuel filter or fuel lines because then you’d have fuel leak it will have to be leaking from manifold or where you have your vacuum lines on the scooter. It sounds like the bike isn’t pulling enough vacuum off the pump to keep the fuel In the carb.
Hey great content I am a new subscriber. But look into the lens not at the screen above it. (You are pretty good about it but the times you don’t are noticeable). Anyways I love the content and just want to see you get better! Keep it up!
Burnout Bobby TY my dude..., just starting my ruckus project and appreciate your time 👍. Gonna rock stock wheels for now and want to slap that same look of tires on my rims for now. Would my back wheel have the same profile #’s as well? PS..., just recently acquired the billet dorf seat frame and long cables to go with my MC Stretch from the shop. So excited to get shits tore down for powder and paint..., hoping mines ends up looking half as tight as yours🤔
Thanks for the upload. I would like to know your opinion on me being an engineeer for Honda or Yamaha motorcycles. I currently finished my local college automotive brakes class and I’m currently taking engine repair and engine performance classes.
Do you have a copy of the invoice for your pro bolt USA order? Would be super great to just order what you did and not have to remeasure everything myself!
Zachary Wiest I wish I did but I couldn’t find my order and tried reaching out to them for an old invoice with no response. I had a friend wanting it as well
That’s a tricky question. Technically the frame is the only thing that is registered since it is the only piece with a vin on it and the motor is not. But then you are above 49cc. So it’s at the required amount for most states to have an endorsement. I will say that probably 90 percent of the people I know with a gy6 swap don’t have an endorsement. I have mine just because I love riding all types of bikes.
JP it’s more expensive to build from the ground up. It’s cheaper to find one already swapped. I’ve bought a bike for 3 grand that had 7500 into it. So I usually look for a deal like that.
I have a 150CC Maddog, and I saw earlier you said some Ruckus parts don't fit, how does it work as far as the engine and using the parts listed here and on Motonosity's build?
What size can,make look this one case I have mad dog ruckus clone gy6 I think icebrar mad dog ruckus clone gy6 50cc what size is the wheel,hub I can get off eBay.com
Badass I don’t think I’ll ever have the money to do this that’s why I’m gonna get ice bear and get some 13 inch fattys and I’ll have most of what I want
VaNgLeE24 yes and no there are a lot of parts that don’t fit from the Ruckus. The front end kit needs to be modified with shims. Once you go to a 150 all the performance parts will work
· Honda Dealership. Buy a ruckus new. · Various Motorcycle Shops that sells used ruckus of various year models. · Private Sale from owners. After that find a ruckus parts store you trust. theruckshop parts ships by mail. I hear great things about them. Check them out.
@@burnoutbobby so nother ? What if the bike sits to low and your like bent over to reach the handle bars is there anyway to rais the front end to make it feel more comfortable??
ThePotatoIsAStarchyTuberousCropFromThePerennialSolanumTuberosumOfTheNightshadeFamilyLOL I’m sure there is but I’m not sure the total weight the bike can support
That bolt set is so dang clean
Motonosity cant wait to see your honda running again
Was wondering if i should pull the trigger and get a ruckus, now I’m convinced.
snatch ric it’s a have to!
If i get one i need it to go 65-70mph.
I love this ruckus personal favorite....
Just got my 2018 Ruckus, already made a small TRS order. Glad I found you and TRS!
Mark N awesome. Always appreciated!
You got your ruckus ...im try to get mine also i want gy6 90mph..im from nyc,if you have any link for it in nyc would love to stop at the shop to able to look at them and able to buy me one
Slim razor man 90mph is very hard to get and when you get to that level you have to worry about fixing the motor very often since it isn’t reliable at all. Basically like the 232cc. They are cool but not reliable. Reliability wise I’d say 171cc and if done right with ported head and tuned it can do around 80.
Burnout Bobby ...okay no plm do yall know any link for dem ruckus in NYC SO I CAN BUY ONE AND 80 MPH IS NOT PLM ALL I CARE I WANT ME A RUCKUS JUST LIKE THAT ..PLS CAN I GET THE LINK
Slim razor you will have to search craigslist for a full build. There won’t be a link for one all done up as a complete bike. To do the swap is about 1600 then it’s really up to the build as to were you go with it. They are very versatile
Second coolest ruckus in the shop🤣🤣 good job on the video . What’s up with that Mini Cooper I heard it’s fast
The Ruck Shop hahah I lost to this blue mini and haven’t recovered
That has got to be the sickest ruck ive seen yet damn bro
Thank you
Sent over by Motonocity aka Brent. Stoked to watch your past videos.😉😀
MelMay thank you. I should have another this weekend it will be great weather
Very nice Custom.
Congratulations!!!!!!!
Great channel. Also came from motonosity....I know you alrdy have your ruckus built but I would love to see a frame up ruckus build from you...preferably with that 171 u where talking about. Like the one on TRS website.
Would like to learn more on what exactly the parts do as far as the wiring goes.
Keep up the great videos!
Rob Conway haha thank you. I’d love to do a complete build as well but that will cost me around 6-8k to do another like mine. So I’ll need more followers and make some funds off of TH-cam to get another build like that in the works. I’d love to do another in the future. I’ll be building my met in the next few weeks but still 49cc
Burnout Bobby no worries...I know how it is. Definitely looking forward to future vids. I plan on starting my frame up ruckus soon. Will prob be ordering most parts from you guys. Btw...how fast IS that 171 on TRS site?...looks very tempting...is it pretty reliable or high maintenance like other high performance motors
Rob Conway I’ll get better builds and videos to come and be more entertaining. I appreciate the sub. The 171 is reliable like the 150. It will probably do around 70 ish out the box but with tuning it and dialing it in it will do mid 70s. If you port the head it can get to high 70s low 80s with tuning.
Burnout Bobby...don’t wunna bore you but I def plan on installing an a/f gauge to get a good tune. (Would be a good vid). Would also love to see a vid on installing an oil cooler....you will be the 1st one cuz I can’t find one.
Rob Conway air fuel is really simple. Weld the bung to the pipe and you just need a power and ground for the af gauge. The tuning is the fun part lol. I don’t run oil coolers since it’s not really needed unless you go over 200cc in my opinion. I’ve ran these motors for over 200 miles a day without cooling issues so I’d say don’t use one and keep the setup clean 👍🏻
Totally stunning and great channel, I wish you all the very best.
wide awake thank you!
You ruckus is sick a Carbon fiber in front fender would look good on it
🔥🔥🔥 so Dope. Thanks for all the clips bro! Especially the ones on how to get the get 😂 up to 50mph
I love the push button start with the arcade style button! could you make a video walking through how to do that?
We sell this button on theruckshop.com
@@burnoutbobby found it thanks!
Hey man, digging the channel. About time someone has more up to date ruck content. Your ruck is sick too bro...very clean. Pretty much the same setup on mine. So I dunno if you'll even get this but Spring is around the corner and I'd like to loan wolf it without worrying. Im on LI in NY and last season I was having some serious fuel delivery issues. If the ruck sat for a day or two then the fuel would back out of the line. Then when I wanted to start her up again it would take forever to get fuel back to the carb. Sometimes even when I ride it'll shut off from lack of fuel. Anyway, I'm this close from getting an electric fuel pump and trying that but I feel like that may be a bad idea. Any ideas you could throw my way would be appreciated. Thanks.
Michael Staton could be one of three things. One is that the fuel pump diaphragm might be bad and need a rebuild. There may be an vacuum leak and another thing to do once you figure out the cause is get a fuel check valve.
Burnout Bobby def not the pump...bought a brand new one and the same issue. As far as a vacuume leak, how can I check that? Could it be the fuel filter by any chance?
Michael Staton doubt its the fuel filter or fuel lines because then you’d have fuel leak it will have to be leaking from manifold or where you have your vacuum lines on the scooter. It sounds like the bike isn’t pulling enough vacuum off the pump to keep the fuel In the carb.
Super clean.
Dam 🔥🔥🔥 so Dope. Thanks for all clips bro! especially those on how to get the get 😂 up to 50mph
Sick ruckus! I believe I talked to you when I ordered parts in the past!
Jon Ball probably was me thanks man
Hey great content I am a new subscriber. But look into the lens not at the screen above it. (You are pretty good about it but the times you don’t are noticeable). Anyways I love the content and just want to see you get better! Keep it up!
Nick Miller thanks man but funny part is my screen is to the left of the lens hahah not sure where I was looking
That's super sick!
Thank you
Sweet build!!!!!!!
New follower here.. Sick build bro
Those wheels! Nice!
Absolutely stunning
motonosity send me 😂🤣
Dang bro that is so cool that's a dream Ruck
Thank you brother
Beautiful Ruk
Hi I'm from.philippines I like your ruckus I luv it I luv ruckus
your ruckus is beautiful but I've always wondered what has not been modified? and what would this cost you? from stock to current
The frame is the only thing not modified. A build like this can have 7-8k into it
Awesome video brother keep up the amazing work and I wanna test ride one of those what year is your ruckus
Joshua Rides 2004
Sick It looks real clean how much was it
Joshua Rides it’s been more money than I want to admit lol
Aww kool
Wow amazing brow
About that Ruck Life for sure!!! Yo, love that low pro tire look on the front wheel😍. What size tire is that???
100/60-22 sir
Burnout Bobby TY my dude..., just starting my ruckus project and appreciate your time 👍. Gonna rock stock wheels for now and want to slap that same look of tires on my rims for now. Would my back wheel have the same profile #’s as well? PS..., just recently acquired the billet dorf seat frame and long cables to go with my MC Stretch from the shop. So excited to get shits tore down for powder and paint..., hoping mines ends up looking half as tight as yours🤔
@@burnoutbobby did you mean 100/60-12? I was looking for 100/60-22 and nothing pops up. Thanks!
Fernando Pantoja yeah. It was a typo. I didn’t notice that. 100/60-12
That jawn 🔥
is the video coming up glitchy at all? it is when i try to watch it
Burnout Bobby alil bit bud .. I put in 720 and it fix it I think lol
mr somthinbasic215 yeah I had to put it hd and it was fine. I thought I messed up
DAMN!!!!!!
Where are you're pulps? 🤯 thanks for the footy 👍👍
HEY BOBBY! The link to your handle bars is no longer available. Are these discontinued?
It's a beautiful machine
Thank you
Thanks for the upload. I would like to know your opinion on me being an engineeer for Honda or Yamaha motorcycles. I currently finished my local college automotive brakes class and I’m currently taking engine repair and engine performance classes.
go for it man, if thats your passion then nothing is better than doing something you love as a carreer
That has to be the biggest headache to keep clean cool shit though.
Yeah it’s a real pain. Sometimes I give up haha. Thank you.
Berry nice！！！😍
Will the ruck shop get the 171cc race engine back in stock?
River City BBQ we will have another in about a day or so
Do you have a copy of the invoice for your pro bolt USA order? Would be super great to just order what you did and not have to remeasure everything myself!
Zachary Wiest I wish I did but I couldn’t find my order and tried reaching out to them for an old invoice with no response. I had a friend wanting it as well
yeeeee
With the engine swap do you now need a full bike license because its over 49cc thank you
That’s a tricky question. Technically the frame is the only thing that is registered since it is the only piece with a vin on it and the motor is not. But then you are above 49cc. So it’s at the required amount for most states to have an endorsement. I will say that probably 90 percent of the people I know with a gy6 swap don’t have an endorsement. I have mine just because I love riding all types of bikes.
@@burnoutbobby thank you
Damn is it better to buy in pieces and put it together guess might be cheaper than spending another 5k to modify
JP it’s more expensive to build from the ground up. It’s cheaper to find one already swapped. I’ve bought a bike for 3 grand that had 7500 into it. So I usually look for a deal like that.
Quero comprar 10 Honda ruck,o que fazer?
So do they make a decent aftermarket speedometer you can hookup to the ruckus to take advantage of the higher top speed?
Draegus007 we sell two digital speedos the trail tech vapor and koso gauge. I use my phones gps because I want to keep my handlebars clean
Hey Ryan.
Are those handlebars still available? Not seeing them in the site?
They are not. The ones we have now like them are called the og bars and use the clip on nandlebars
I have a 150CC Maddog, and I saw earlier you said some Ruckus parts don't fit, how does it work as far as the engine and using the parts listed here and on Motonosity's build?
Jed Danielle if your motor is the 150cc then our 150cc parts will Work just fine
thanks, trying to get on your level with what I got and not starting over.
Jed Danielle yeah if it’s a 150 we can get you going
Sweet, I will give the shop a call. I appreciate all the help
I like the Bike plus the rims very nice I want to get me one
Do it! They are great
What size can,make look this one case I have mad dog ruckus clone gy6 I think icebrar mad dog ruckus clone gy6 50cc what size is the wheel,hub I can get off eBay.com
Pimp my ruckus!
Badass I don’t think I’ll ever have the money to do this that’s why I’m gonna get ice bear and get some 13 inch fattys and I’ll have most of what I want
Boss can we do this on icebear maddog bikes
Some of it. Not a lot of the parts for so it takes a lot more work
Burnout Bobby thanks dude ill save for the ruckus
Dude cost..whole thang...how much.????
bubanner probably 8-9k into it with buying the bike
@@burnoutbobby holy shit
Head light is it hard to install it
No it’s easy. Ground to any negative on the bike and then power goes to either high or low beam.
Can't find those handle bars on the website are you guys sold out??
Braham Perez stopped making them. The closest we have now are the og bars and clip ons.
Isn’t it dangerous to riding around so low? Visibility for other drivers
I’m really not that low. I don’t scrape at all.
Burnout Bobby okey so u don’t have any problems:) I love ur bike
No problems. I set the bike up so it’s not slammed. I want to be able to look good and enjoy the ride. I appreciate man. Thank you.
I have theee.......hahaha
Ruck looks nice man!
Hey ryan i have the 50cc maddog and plan to do gy6 swap on it do you think these part that you have will work on it or not
VaNgLeE24 you will need to buy a weld on mount
Burnout Bobby so i can just get all that and just different engine mount than.
VaNgLeE24 yes and no there are a lot of parts that don’t fit from the Ruckus. The front end kit needs to be modified with shims. Once you go to a 150 all the performance parts will work
Burnout Bobby you think you can get me all the part link that i need for the swap from the TRS
You do not mind these models for Brazil, do not you sell?
Fernandes Films we do not sell these. Just parts.
Okay, so it's a beautiful job, thank you for your attention.
Hella jealous
I also want a bike where it is possible such to buy ?
· Honda Dealership. Buy a ruckus new.
· Various Motorcycle Shops that sells used ruckus of various year models.
· Private Sale from owners.
After that find a ruckus parts store you trust. theruckshop parts ships by mail.
I hear great things about them. Check them out.
Actually I could get a used one here n town for 3000$ it’s 171cc cuase it’s bored out would you get that or a brand new ice bear gen 5 for 2500$
I’d still get the ruckus as they are built better than the ice bears.
@@burnoutbobby so nother ? What if the bike sits to low and your like bent over to reach the handle bars is there anyway to rais the front end to make it feel more comfortable??
Yeah you can get higher bars.
Thanks man very new to this
Not a problem, anytime.
Whats ur air filter carb?
Unit air filter on oko carb
How much price sir..
8,000
for how much would you sell such a scooter, I would like to buy
It would be too much. Probably 8-9k
Igual a minha
Hi,it is for sale?
Yes $8500
@@burnoutbobby thanks good price👍
有錢人，黃金版化油器，這台機車如果送我也不錯，黛安娜王妃的車對不對
any way to make it 2 person, total cost?
ThePotatoIsAStarchyTuberousCropFromThePerennialSolanumTuberosumOfTheNightshadeFamilyLOL I’m sure there is but I’m not sure the total weight the bike can support
You still like ponies bro?
Jesus DSantos what?
On Motonosity's video you said you like ponies
Jesus DSantos 😂😂😂😂 love em
Burnout Bobby love the ruckus man very clean and dope.
Jesus DSantos thank you. I should have another ride video tomorrow. Might meet up with a few ppl
wanna sell it
Everything is for sale if the price is right
Atleast start that sht.. Gosh!!!!!
CHETHRA THORNG start it every week. It’s riding in other videos
That hat doesnt fit btw
I’m so glad I have your insight!
@@burnoutbobby your welcome. Sick scooter tho. If I wasnt 6'4 I'd have one
I appreciate it. Yeah you’d need more leg room