How to use AI Overclocking on an ROG X670E Motherboard for Ryzen CPUs
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2022
- Our AI Overclocking has finally come to AMD motherboards with the latest X670E chipset. Here's how to enable it, and the performance benefits you'll reap with this dead-simple tweak.
Watch our full X670E overclocking tour here:
• Overclocking Ryzen 700...
Get even lower temperatures with ASUS' new PBO Enhancement feature:
edgeup.asus.com/2022/control-...
Join the Republic:
/ asusrog
/ asus_rog
/ asusrog
/ _asusrog - วิทยาศาสตร์และเทคโนโลยี
![โอ้มายก๊อด! ไม่ถึงชั่วโมงหมดเป็นแสน 😅 [cc] แดนแพทตี้ SS2 | EP.42 |](http://i.ytimg.com/vi/OH2ShXfO6tA/mqdefault.jpg)
asus 4 life 💪 i got the B450M-A ii runs like a dream with the Ryzen 5 5600g.. runs at 4.5 ghz no descrete graphics card just I-Gpu awesome combo :)
Damn I hope all future motherboards support AI overclocking. Getting super fine tuned overclock without any work seems amazing.
Nice my cbu hits 100c with this enabled
Why I am unable to see that "AI Overclock Tuner" in AI Tweaker menu. I am using b450 Dragon motherboard with 3200 mhz memory and ryzen 5 3600 cpu and CPU speed is by default set at 3.95
Its safe to do that with a board Strix B660-F gaming? Or even that ROG performance and power saving utilities program: the Auto tuning: OC tuner 1 / tuner 2 - I can use that program too? I just dont know if is safe with a board B? thanks (I have a i7 13700K , DDR5 5200 Mhz)
Thanks for review
What is the Optimism Scale and how does it affect the Ai OC?
Ok my question is. How can i set my frequency to strict 4.9 ghz instead of 5.1 +
What does the ai do for a cpu that’s already undervolted?
This would be really helpful, if the expo option was still there on the x670e hero bios, but alas. It's not there. I used the other option, and it did absolutely nothing.
Can someone explain to my why the ram is limited to 4800 even tho ddr5 ram I have says it can do 6000 but I have to overclock it? To activate the intended speed?
so AI overclock plus PBO enabled?
So i always get this ai overclocking window wen i turn my pc, even tho i discard changes and exit it goes back to ai overclocking. How can i disable this window from showing?????? I dont know much abt pc and have no idea what ai overclocking is and dont care right now i just need to docsome work on my pc plsssss help 😢😢😢
I may have messed up ...I bought a b650e-f gaming wifi mobo with ddr5 6000 cl30 gskills ripjaws S5 ...I did not notice till now that my ram says "with intell xmp" but I am going to be using a ryzen 7 7700x ...and further i do not see that ram listed on the qvl on the asus website ...i used pcpartpicker to ensure everything works but now im kinda panicing ...will i be able to use that ram at 6k even though it says "intell xmp" or will that ram even work?
yes you will be fine, i would check the qvl and see if there are any other sort of modules that use the same speed and same timings as they will be identical to your ram except a different heatspreader. but 6000mhz is considered the sweet spot and safe for this generation. given that your motherboard is a 8 layer pcb should give you even more of a chance it will work.
Bought XMP (Intel type) ram. 20% cheaper than the idendical EXPO version. Works fine, clocks to the rated 5600 and beyond.
I had bad AI OC issues every reset my AI added more Voltage 1.4-1.6V@ 5.5-6.2GHz. I just under volt now and use PBO with 1.2-1.3V max @ 5.5-5.8GHz with single core spikes of 6.2GHz
How did you limit the voltage
new bios update fixed a lot of the Asus issues but setting a negative offset was the only thing that would keep the voltage from spiking. @@Xkd.
Core ratio isnt even in the bios anymore lol
Anyone know if you can bring back Core ratio when it does not show ?
I have the X670E-i running on the latest BIOS (updated today) but I don't get to see this Extreme tab, any tips please?
It’s on the extreme version mabe
Your BIOS probably calls that tab AI Tweaker, now.
why dont i have this i have a 7800x3d and x670e-f and i have no core ratio
I don’t have the expo II option. We have the same version
This feature causes all of my games to crash. I would recomend the user enable expo ii but leave the core ratios at stock.
did you test this feature in some new bios version?
All my games crash randomly within 10 min to an hour of playing and I had this set to auto. Not sure why if anyone knows a fix because of this I’d appreciate it
I wonder why everytime this mb does memory training while booting up?
we have tried that but the system just started and trains memory then tells me its unstable which is complete crap, worst motherboard I have had so far
I was able boot my x670e hero with 6400mhz cl32 kit. How can I check if its running at a 1:1 ratio?
I found that it wasn't. I had manually set the flck to 2133mhz and ulck=clock to make it run at 3:1:1. I stress test it and seems to be stable.
how long your pc takes to boot ... mine takes 1 min
@@MrPreet23 takes about a minute as well. This platform trains dram for way too long.
where and how did you even open that tab or application? I thought this is for people who never overclock their cpu?
Hey! So this is your BIOs, everyone who has a PC should familiarize themselves with it. It houses settings for overclocking, but many other funtions as well. It's accessed when you turn on your PC start spamming F2 or the delete button when you mobo screen comes up thats when you actually need to hit F2 or dlt, but you only have like 3 seconds to hit it so I just spam.
In asus mobos they have a setting TPU and it allows you to OC without having to be knowledgeable about voltages and temps and all that jazz. Or without spending a buncha time fine tuning an overclock for stability.
Hope that helps!
I have ROG Maximus Z790 Hero AI Optimized enabled it's bluescreen problem help me?
I see the Auto AI tuning core ratio feature shown in this iteration of the bios is no longer there in 1709... so I guess it was the AI that blew up the AM5 processors when they were released? 😂
*ROG Global* - CPU Core Ratio to select AI Optimised and AI OC Guide menu option are missing in the latest Bios for the Asus Strix x670e-A Gaming Wifi motherboard. I've purchased the 7950x3D for that motherboard and I am unable to get the 7950x3D to 5.7ghz that is advertised of doing via the latest Bios (v1709 x64). I was hoping that Ai Optimized would be able to achieve this but I am having zero luck. Can you (or anyone) advise on how to do this, please?
Did you make any progress?
Same here @@SaschaRobitzki
Most features are missing from this Bios, no AI overclocking, no CPU core ratio, no MemTest in bios too
@@Kiwironic That's sad, considering it isn't a budget board.
@@SaschaRobitzki man you don't know half the story, rma MB, rma cpu, rma ram. Today I just got the 3 parts replaced and installing windows now. 3 months later after paying a lot, a lot of work and no post, dealing with 3 different companies for RMA. Now trying expo and bios settings, to find out that the MB features are gone. Gotta do it manual. To be honest, the expo enhanced settings are working fine so far but bsod whenever I try any negative offset on all cores. Again, I'm just happy it's posting at all. I've been waiting for too long.
Is this compatible with the strix b650e-e gaming Wi-Fi because so overclocking isn’t listed on its product page
All Asus AM5 boards have this. I have this board with a 7700X. Expensive but very nice. If your DDR5 is not posting, try 1 stick, set ram speed in bios, then switch to 2 sticks.
HOW I CAN FIX MY CPU RYZEN 7 4000 Frequency is geting up to 3800😪😭 and the hitting up to 90°
6000 Mhz DDR5 not working for everyone if you're CPU not pushed or overclocked at 6 Ghz or beyond what's to point for the general gaming user ?!
Currently running AI DOCP Tweaked at 5600 Mhz CL 40, 40, 40 memory that only supports XMP profile and also pushed a little bit more around 5800 Mhz manually the system is super stable and that's it for my system tested on AIDA 64 also OCCT memory test also stable no errors or crashes !
I don’t have expo settings and I have updated to the latest bios. Any suggestions ?
Is your memory EXPO rated if not use XMP, DOCP or EOCP depending on your MB manufacturer
Hello guys, i have an Asus ROG STRIX X670E-E GAMING WIFI, i can set the EXPO II in AI Overclock Tuner but i can't find the CPU Core Ratio anywhere
Same
@@hirezsuicide it seems that if you have an x3D cpu, it wiil be disabled
Just curious, Why expo 2? And not expo 1?
Expo 2 (as stated in the description of your BIOS) loads the entire profile from your memory. Expo 1 doesn't, so you have the option to do some tweaking on top of EXPO 1
unfortunately 4x32 6000 MHz is not supported yet. The system gets stuck on post with the orange light on
2 ram works at 6000 MHz or if you want to run 4x32 @ 4000MHz than that will work with updated bios.
Gotta run manual OC not expo. Manually set all the same settings. Fixed my issue.
Help help help.
Lütfen bana yardimci olun.
Asrock X670e pro st anakart ve 7900x3d işlemci ile bir pc topladim.
Ramlerim 64gb. 6600 mhz fakat biostan ram frekansini yükseltince pc kapaniyor.
Bunun sebebi nedir ??
Hours? How about days... Seeing if this is better than my OC I've spent over 30 hours on at this point. Will edit and update when I figure it out.
Was it close?
Soo did u figure it out?
@@Big-MT yeah just don't use AI overclocking. I have a 5.8 all core now and it works just fine.
@@Deltatwo3 okay good to know, thx
When I saw the proart x670e-creator wifi motherboards, I was very disappointed. Not having a Thunderbolt connection was very, very bad. We are waiting for this bug to be fixed.
We?
Lol, schizophrenia?
Hope you get better
Please HELP! I have the SAME speed of RAM and the same motherboard X670 Hero. When I put 2 dimms of RAM, this works perfectly. But when I install 4x32GB of RAM, it never runs on anything above 3600MHz - impossible. Bios crashes. PLEASE HELP! Thank you!!!
Thats normal dude.... See the Specs of ur processor
a mi me da un problema esque no me inicia y dice error
anyone know how to get a hero to boot from a pci-e ssd?
Will that hurt the cpu value? I mean does it do something with the cpu voltage?
100% it does, these guys are giving weird info. My 7700X AI OC ran between 1.4V-1.6V @ 5.5-6.2GHz with temps running very high. I switched to a undervolt using PBO and run at 1.2-1.3V max @ 5.5-5.8GHz and spikes of 6.3GHz on single cores
@@RCrider185 yo can you help me. I have rtx 4090 with r9 7950x and 34gb 6000mhz ram but I'm having 1 problem in 1 game and oc the CPU might be the solution
@@jfat511 normally I’d say the OC would be the problem “ stability” but if your running at 1080p or 1440p it maybe the CPU, but at 4K that’s more your GPU end of things. What Game? If your going to say “last of US” then that’s an ongoing issues with the port to PC.
@@RCrider185 warzone 2, I'm playing at 1440p. The game has multiplayer and battle royal version called warzone 2.0. when I play the multiplayer everything is perfect 99% GPU utilization and everything check out except when I jump to warzone I only get 160 fps at time and 70% GPU utilization.
@@RCrider185 a discrepancy that I notice is that my CPU temp doesn't go higher then 73% in game and on 3d mark timespy also the temperature doesn't pass 83%. I mentioned that because I've noticed that it goes higher for other people.
What is the difference between Expo I and Expo II?
the difference is 1
I don’t see any expo option. Only docpI and II, does this mean my trident Z 6000mhz kit is not expo compatible? How can I get my kit above the running 4800mhz I see now? Anyone help a noob here ?! And thanks.
i have the expo option, the memory chip has to support it. spec: G.SKILL Trident Z5 Neo RGB Series 64GB F5-6000J3040G32GX2-TZ5NR + ROG CROSSHAIR X670E HERO
docp is the same thing as expo, just activate it
That’s for intel
HELP? Did you update Motherboard doesn’t show EXPO 2 or 1
It’s there under advanced settings.
Mine shows Docp I and docp II No expo settings at all.
@@96kylar that is the Intel version
Got asus x670e extreme two sticks of 16gb using expo 2 but constant blue screens wont even boot on ai overclock update on issue mobo was faulty replaced mobo no issues after replacement mobo
What ram are u using? Are using ram on the QVL list? I have seen posts with certain ram causing issues because the ram is on QVL list
try expo 1...
@@linerror tried that too but to no avail
@@fightinirish73kk is the RAM optimized for AMD?
@@TheSjuris yes amd expo ram
thanks ! was able to do ddr 6000 expo II 64 Gb on my new ROG CROSSHAIR X670E HERO
Did you find the ai optimization? In the core ratio
@@thevideogamer315 Yes i did :)
I did on my x670e strix with 6000mhz expo 2. It seemed to be stable until running games. Mw2 crashes and gives memory related error. Says memory_large something like that
solo puedo ponerlo a 5200mghz y eso que tengo una placa x670e Hero
What is the difference between EXPO I and EXPO II?
they are different memory profiles from the ram's settings.
@@linerror expo 1 use the advertized first couples of ram settings than asus optimize the rest of settings. Expo 2 use all of your ram manufacturer settings as they should since its what you pay for. I would always go for expo 2 since i think it should be more stable in the long run.
And what is the Expo tweak? What is the differrence?
it takes around1 min to boot, is this normal ???. Amd 9 7950x with Asus x670E strix E motherboard
Yes it is.. unfortunately :(
I just build my new system with these components and it also takes long time to boot ...
Yep. Asus motherboards for am5 aren't known for fast boot times. My wife's pc I built for her which is 1/4th the price of my pc with a gigabyte motherboard boots in 12 seconds, and mine boots in a minute.
Based on the comments, it sounds like it's ok to have Ai OC and PBO enabled and they work together, correct?
I have both enabled on my 7950X, and the RAM @ EXPO2. So far no issues
I dont have ai tweaker
With this method (with AI enabled), on an Asus ProArt X670E, I obtain optimal temps and bench, but if I try to run AIDA64 FPU test, the system reboots immediatly! With AI disabled, no crash occurs, but I get higher temps and little less performance (on CB23). Any suggestion on how to fix it? It looks like a vcore matter.
У мене аналогічно. Даремно переплатив за цю функцію. Asus tuf X670E Plus Wifi
over clock the regular way lol dont use pbo or ai, just try to set lowest volt for the highest speed as much as u can
Are you using Stock Cooling?
I dońt have that option in my BIOS and I got the newest one
Update your BIOS just in case
@@AdityaTripathi There is no newer one, but thanks will try doing so
It’s under the advanced settings under ai tweaker😊
@@TheSjuris Yeah found it. Finally got a Update two days ago and there it was😁
This feature simply never works! Try it if you want to see a blue screen every 10 minutes! I'm pretty disapointed to be honest!
Lol. This video hasn't aged well.......
lmaoo
These so called “AI OC” features are trash. Just set EXPO and avoid them. They’re literally useless.
Your insane prices are killing AM5.
Yeah but they are the x670 which is the top end u could wait , and anyways 5800x3d is better imo
The prices are not that bad honestly the motherboards are finally are par with their Intel counterparts. These are the high end boards mind you as well. Wait for the B series boards if your cost conscious or stick to am4
Remember Intel allowed cheaper boards to use DDR4 RAM, AMD didn’t.
and see you 4 years from now, using the same rad mobo
I own the X670E extreme this board is just insane i boost all core to 5.35GHZ and single core to 5.65GHZ