Another Blown Purge Valve : How to Replace : 2016 Volvo VNL 670 780 D13 : Ep. 134
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2020
- How to replace blown purge valve on a 2016 Volvo VNL 670 and 780.
WHY AREN’T YOU USING A FUEL CARD
👇🏻CLICK👇🏻
www.rtsinc.com/agent-company/...
GET PAID TODAY, Factor NOW!
www.rtsinc.com/agent-company/...
“Filmed for viewer entertainment. Everything in this video is a product of my specific experience. I do not own the rights to any media used in the making of this video”
Thank you,
Jason!
** SHOW YOUR SUPPORT! **
** HIT THE THUMBS UP! **
** SUBSCRIBE AND COMMENT! **
Email:
ImperialHaulers@Outlook.com
Facebook:
/ imperialhaulers
Instagram:
/ dream.inspired
SnapChat: / dream.inspired
Replace the air drier. Get a good bendix one and replace it annually. Especially with an i-shift truck, you want that air system as dry as possible to prevent costly repairs on the transmission
Cost money to make money. Stay focus, humble, and blessed.
I applaud you for doing what you got to do! keep it up!
Thank you
Thanks bro that's what I found had to go underneath the truck
Just have a huckleberry milkshake 💁🏻♂️🥤
Sounds like you need to replace the whole deal not just the purge valve
Stay safe out there love you show
Love your videos
Sorry for your pain , thank you for the video's,
A trick that works some times if Purge Valve is hanging/stuck open; hold your hand over it while it's leaking to stop the air from leaking out, wait a few seconds and some times the back pressure will cause it to pop closed again.
I actually started to take it out, clean the washers and seals and put it back in. I only replace it when a part is broken.
u got this!
Thank u sir
Great video
Keep up the grind amigo
Good stuff bro
Great video, it will get better god bless you and your family
Good job my man.
I need to get it done and the video was great.
It’s gonna be a perfect Christmas gift to me 😁
I want this PS4 💪
Greetings from Beaumont,TX
I'm in hotshot (2 years now) planning on making the jump to semi in another year. Do you regret the jump? Are the profit margins alot better?
Most people would be to lazy to walk an hour. Keep up the good work and good videos :)
Hey man I'm not sure if you check these or not I just ran across your video and wanted to lend you some of my experience with these. It's all cause and effect really, if your pledge valve is going bad that quickly you might want to check to see if there is oil in your system caused by a bad seal on your air compressor. You can usually tell this by the smell of the air that comes out of your purge valve or sometimes if you have a Volvo like me it will turn a spot on your side fairing black or a little bit of oil will come out when you release some of the air out of your tanks. This will cause other issues with other components in your hair system including your regulator, the air dryer itself, or the junction manifold under your truck that feeds are back to your airbags and stuff. Just for reference a new air dryer filter is $80 online and a whole new Air Dryer assembly with a new filter included is about $200 that is a no brainer.
I had a feeling it was the Air Dryer the whole time, but not 1 person I took it to agreed. Long story short, after replacing almost everything else, I finally did the Air Dryer and that’s exactly what it was. Truck run amazing now!
I don't use TH-cam to post comments very often but if there is a way for you to hit me up if you have future issues such as DPF or pretty much anything I would be more than happy to save you time and money I'm not a diesel mechanic but I used to do high performance before I was a truck driver and knowing and learning as you go in my opinion is a part of this job that people don't bother to do
@@whitetailfox1hi do you know how to fix dtc p24 f700? And my truck is not using any def with this issue
Informative I bought purge valve kit couldn't figure out how to install it and just replaced whole dryer. They are so cheap on Amazon now
I hope you grabbed two of them for a spare. Stay safe and keep the wheels rolling ✌️
What up bro i like ur videos
💯👍 I like your video
They are not supposed to break so often make sure to drain air tanks
Hang in there. 👍🇺🇸💯
I have a question about DOT inspection, on Dodge Cummins 3500 tires. do they have to be a certain size or anything special about the tire? Just bought a used 2014 and just wondering if I need to go get certain tires before going to get it inspected
Just got back to you on your last post. Also, check with TowPiglet. Alex has a video on his channel about Hotshot tires. I’ll try to find the link
th-cam.com/video/6-uL_Qj6vnQ/w-d-xo.html
@@DreamInspired thank you so much for the quick reply!
You’re welcome and good luck! Add me on IG if you have more questions! Look forward to seeing you out there sometime! 👍🏻
Hey buddy! Some things you can do yourself before bring into the shop that cost your whole body instead arm and leg, lol. After you done change pruge value, there a rainbow behind you. Hope you find a great bundle deal for parts. As always, stay safe and enjoy your journey.
Very helpful vid , I got stock in a traffic jam of Chicago air dryer was bursting air like crazy had to put a piece of rubber with zip ties I just so I can build some air pressure to get me goinging went to the dealer to get the parts he wanted to charge me $300 for labor thanks for your vid I did it myself parts was $83 more then what you paid
Hey there Jason want to say hello,👋 to you, new subscriber to your channel, yeah I purchased a complete air dryer however when I takeoff the old one I’m going to be rebuilding the air purge valve, new filter and I’m gonna Save that for a emergency, appreciate the video sure helps heck of a whole lot, and by the way I think it’s funny the way the car smells so take that into somewhere 😆😆😆 like a car wash and I don’t clean the inside of that😆 I can’t stop laughing and get a receipt until those people you had to clean the car because it smelled real bad👀😆😆😆😆, anyway that’s dead so cool video and again thank you, Robert from fort myers Fl D13 Volvo.
Looking from Danmark
Where did you get that part bro ??
10:54
Called a snap ring :)
You got a fan from Kosovo 😉
Great to connect with you Erit!
Definitely need to change that dryer.
Also I see you can do a lot of maintenance yourself that can save a lot $$$$. If you had a shop do that that would have been a couple hundred a pop. Keep the wheel turning be safe out there.
Some good stuff bud you are in neck of the woods
Just hang in there pal things will get better
Snap ring......also the beard is starting to come in nice
Just realized we have the same truck, I have a 2014 670 🤙
Nice rainbow at 15:30 and on
Get two valves so you have a spare. The failure frequency is high.
Hey did you ever find out the real underlying issue blowing your valve Hopefully if I have that issue I will have a headstart thanks for the video
Never found out what started it, but ended up changing the dryer later on and it hasn’t been an issue since.
Yo bro what if it's still leaking from valve any ideas ?
Never figured out what the main cause that started the issue was… But after I changed the air dryer, no more issues. Only thing I would suggest, change your filter often
Have u changed the filter its self
Replaced the whole air dryer. Dam thing works great now
Keep up the good work you have to take care of your girl at home
I would buy a few of those valves to have on hand just in case. At least until Volvo can fix the problem.
Just got the purge valve replaced on a Pete two weeks ago
Easy fix. Hope you didn’t pay to much
@@DreamInspired Walmart replaced it, so I didn’t pay anything 😂
🤣 dam I got ripped off
That beard came in nice eh? 👳♂️ Also, I've never heard of having to carry spare purge valves, it doesn't seem like something that goes that often...? Might be an underlying issue there. is your dryer one of those ECM controled or mechanical?
Thanks for your videos, rental place changed the car because the smell.....?.
This has been one nasty yr for every thing but i can say been toin ok trucking wise hope it gets better for u bud
Your truck just like mine has a recall on air dryers. There is a malfunction on those air dryers . oil and water gets in and contaminates the brakes. Make sure they fix it for you for free.
What? How do I check if there is a recall? Is there a site or should I just go in?
Thanks for sharing! Saw you are a Vet, you claim any disability? Enjoying your channel!
Or maybe replace air dryer good job be safe and dreaming
if its the same ones we make save yourself some time and get a case of them we found a way to make them fail super fast now its kinda a secret but man are we making bank over at the shop -just trying to save you some wear and tear on the nikes my friend......
Should get two purge valve lol
I bought 3. Always buy 3.
My dream video game can you give it to me sir thankyou godbless keep safe always sir❤❤❤
you put the lube in the wrong place
Leave a comment below
Hope I win.....Here's to hoping December is better for you my Man. 🍻
When you see a part that requires all those pieces it makes me want to punch the engineer in the face or atleast see him/her fix it themselves.
600 u serious. I can put u in contact with the company i run with. 1000 to 1500 take home a week after insurance for the family
My regular take home is around $3k a week... Just had a slow week.
change your air dryer it,s got crap in it thats whats taking that valve out. that valve should last years not months
Changed it today! 👍🏻👍🏻 Works amazing!
Walk an hour? Why not Uber?
I Uber or Lyft I’m small towns like this.
To much talking...
Great video