When starting my RB s14 after sitting for a while and wouldn’t start the same way. Changed plugs, added fuel. I had forgot I repinned my crank angle sensor for a different ecu! Repinned and started right up.
Jimmy you should set up a second channel that is screen recording you tune and setting up base maps. Essentially like the nerdy diy videos that not everyone is interested in but a lot of people might like.
Here in New Zealand the “NZ wiring” trigger kits are an ideal plug and play replace for the cas. Billet plate with an after market sensor. Plug and play with an OEM CAS plug too. The only thing you have to do is change a few settings on your ecu. You should look into them, the owner Geoff is awesome to deal with!
Jimmy this guy in NZ (nz wiring) makes a trigger kit for rb only 1 bosch vr reluctor goes in replacement of stock CAS. Works really good there is also an ebay rep from yeshla I think they are called
When I first swapped in my JDM J32A with a six speed manual into my 2001 Accord and got to starting it for the first time it was missing BADLY for the first few startups and FINALLY it smoothed out and started running smooth. Turns out one of my injectors were clogged and it needed some fresh clean fuel ran through it. Now it has a GT3582 turbo on it and currently makes around 450 whp at 8.8 psi.
Progress is better than no progress. When u said ur teaching Drew to tune, my first thought was "he's gonna forget all that sh!t". Keep rocking out boys!
Your a massive inspiration for me Jimmy I’m currently in hospital in England but have my own bmw E30 at home half way through an engine swap inspired by yourself and your E30 keep up the content it gets me through the days👌💙
With the G4X even a properly running stock CAS can be funky, I have a PRP crank only trigger kit with the G4X and it's running like butter, RB25DET R33 as well. Have also heard good things about the NZ wiring trigger kits.
@@KennethStaton I know this is off topic and has nothing to do with cars, but what are you guys favorite wrap or paper if you're not about the blunt life? Mine would be blue raspberry (mango swisher is a close second) and my paper of choice is raw (since they don't add chalk or anything else that you shouldn't be smoking)
Might be worth keeping some 303 bearings around for when you do stuff like this so you can just put a new one on if the old one is suspect. They're a really common bearing on cars for stuff like ps pumps and alternators starters etc
As far as getting "swole" legs from driving stick: One summer of delivering pizzas in my '01 Focus made my left calf noticeably stronger than my right. Years later, not going to the gym regularly, still daily driving manual cars, my left calf is visibly larger than my right. Time to start braking harder I guess haha
Hey Jimmy, did you know you can bleed a clutch hydraulic system by: opening bleeder, depressing pedal, closing bleeder, releasing pedal. You are simply replacing what was in the lines, with whatever the mastercylinder is pumping out (hydraulic fluid). I find this method much easier than having to pump it up like you would for brakes.
my sr wont run oem fire order on ecu master black when i put the oem order in it bangs like that. i did that at my old condo and ppl ran outside to see what happend shits crazy
Yoyo reinforce clutch pedal if it's real stiff my old maxima had an aftermarket exeddy clutch back in day and it was to stiff so I constantly broke clutch pedal assemblies
ditch the CAS. fit trigger kit, the are controlled via Link ECU. the CAS wheel upgrade is to compensate cam belt flap which disturbs timing table on high power pulls but 30 year old tech with multiple points of failure. NZ
You shouldn't need a flex pipe if you added a gearbox exhaust bracket as it would all move together then and the flex would happen on the exhaust rubbers! Its how Toyota and Mazda do it from the factory, generally you only get cracking when aftermarket exhausts don't keep this bracket etc which can also lead to turbo exhaust side leaks!
Damn Jimbo, 10% off my wiring harness from Wiring Specialties and now 20% off a clutch from Action Clutch?! Helping my build come in under budget. Now if you could just partner with Z1 or CzP and Kbd bodykits id be set lol.
I feel I feel like I've heard somewhere and not to use red lines transmission the oils in Nissan Transmissions because of the brass in the transmission or something like that
A lot of performance cars have brass in the transmissions and you need to run a GL4 rated trans fluid or else the brass will corrode and the trans will slowly turn to shit. I think redline does make a fluid for GL4. My RX7 needs it and I use either Royal Purple or Lucas.
@@Azarathal they've had the Nissan wheel trigger setup in Links for probably 15+ years, since at least the G1s as I've run G1s and my current G4 on RBs with the standard trigger setup. He should be having no problem with it.
10:11 Dj and Jimmy looking like Demi Moore and Patrick Swayze in Ghost.
fuuny, if DJ had breasts and no facial hair, he would be a great girl.
Holy shit 🤣🤣🤣
For Donny that moment was pure ecstasy
10:38 Something strange happened, you can see some sparks underneath the FPS (from the Starter ?)
wow nice catch
Wow how do you spot stuff like that
Holy shit you right man
Bad starter probably he is not gonna last
@@dylanstrachan8970 maybe loose terminal
When starting my RB s14 after sitting for a while and wouldn’t start the same way. Changed plugs, added fuel. I had forgot I repinned my crank angle sensor for a different ecu! Repinned and started right up.
Sometimes I feel like I’m on TH-cam just to watch Jimmy Oakes 🤣
Jimmy you should set up a second channel that is screen recording you tune and setting up base maps. Essentially like the nerdy diy videos that not everyone is interested in but a lot of people might like.
Get the nz wiring kit that is a hall effect sensor and direct replacement for crank angle sensor. Saves running a wheel and sensor on crank and cam.
trigger kit about $250NZ
“JUST HAVE RJ SUCK ON IT” I never go without a good laugh in these videos
Not sure why DJ would say to have DJ suck on it.
@@lolpantsification mistake, DJ, RJ, same same
@@Ggtvler You can edit comments btw
Here in New Zealand the “NZ wiring” trigger kits are an ideal plug and play replace for the cas. Billet plate with an after market sensor. Plug and play with an OEM CAS plug too. The only thing you have to do is change a few settings on your ecu. You should look into them, the owner Geoff is awesome to deal with!
Jimmy this guy in NZ (nz wiring) makes a trigger kit for rb only 1 bosch vr reluctor goes in replacement of stock CAS. Works really good there is also an ebay rep from yeshla I think they are called
I freaking jumped at that bang. Keep on keeping on with the good content
When I first swapped in my JDM J32A with a six speed manual into my 2001 Accord and got to starting it for the first time it was missing BADLY for the first few startups and FINALLY it smoothed out and started running smooth. Turns out one of my injectors were clogged and it needed some fresh clean fuel ran through it. Now it has a GT3582 turbo on it and currently makes around 450 whp at 8.8 psi.
jimmy if you need help with the RB things hit me up. us Australians know them more than anyone else. all the rowdy RBs are in aus and nz ;)
Jimmy , new lift , new year & new ideals ...
SAME DUST
wash the damn cars!
Look up NZWiring and get one of their trigger kits👌🏼
That way you don’t need a crank trigger and it will work sweet for what you are wanting to do👍🏼
OMG love the vibe ! I’m addicted to these videos!!
Don't forget about the speed clip on the trans
10:38 DJ's scream has me dead xD lmaoooooo
Progress is better than no progress. When u said ur teaching Drew to tune, my first thought was "he's gonna forget all that sh!t". Keep rocking out boys!
Thanks for repping our hoodie ❤️. We also love RBs!!
Your a massive inspiration for me Jimmy I’m currently in hospital in England but have my own bmw E30 at home half way through an engine swap inspired by yourself and your E30 keep up the content it gets me through the days👌💙
Get well soon! Hopefully you can get back to wrenching soon
@@pikablue1834 thanks!
With the G4X even a properly running stock CAS can be funky, I have a PRP crank only trigger kit with the G4X and it's running like butter, RB25DET R33 as well. Have also heard good things about the NZ wiring trigger kits.
Just ripped a dab and refreshed my notifications to find out one of my favorite tubers dropped another 🔥 vid
Ayyyeee rolling a blue raspberry white owl as we speak
@@ConnerKlepps131 just lit my swisher sweet when I got the notification 🙌🏻
@@KennethStaton I know this is off topic and has nothing to do with cars, but what are you guys favorite wrap or paper if you're not about the blunt life? Mine would be blue raspberry (mango swisher is a close second) and my paper of choice is raw (since they don't add chalk or anything else that you shouldn't be smoking)
You guys are clowns
@@ConnerKlepps131 king palms are the best blunts, made from hemp
Can’t wait to here it run properly. Goodluck for tomorrow
RJ repping the BQR Apparel awesome 👍🏻
First start is one step closer to driving. I can hardly wait. Almost there!!
My rb sounded like rod knock when my cas was going bad ! I hope its related to this cant wait to see you fix it !
one step forward two steps back, can't wait to hear it run for real
I saw your comment before i watched the video. I'm sad now...
@@ryandercksen4705 sorry
10:11 a father teaches his young child how to add 50lbs of boost on a stock bottom end
😂
The banter while bleeding the clutch was the best!
Might be worth keeping some 303 bearings around for when you do stuff like this so you can just put a new one on if the old one is suspect. They're a really common bearing on cars for stuff like ps pumps and alternators starters etc
This boy only knows good content. Always love watching a Jimmy O video
Get the nz wiring specialities cam angle sensor kit. It's a plug and play kit and alot easier to install than a crank trigger kit
make sure you re-inforce your clutch pedal bracket that bolts to the firewall.
have a look at the NZWIRING cam trigger kit. works great with the LINK ECU too
As far as getting "swole" legs from driving stick: One summer of delivering pizzas in my '01 Focus made my left calf noticeably stronger than my right. Years later, not going to the gym regularly, still daily driving manual cars, my left calf is visibly larger than my right. Time to start braking harder I guess haha
Jimmy needs more colabs and fun stuff! We want to see the builds enjoyed too
Tom sold Ruddy the maching coil packs for that rb a while back #overnightchinaparts
Tommy dildo'd his build
Lmao
When jimmy starts doing fab, his builds are gonna get even better
I,ve been doing these clutches for years pump the fluid from the bottom up with a tin man oiler, in 2 minutes flat
Always fun to watch Jimmy and friends... Where's B-hall been lately though??
This is definitely my new favorite build im following!
I feel like this is every engine swap😂
i’d be more concerned if everything went right the first try tbh
10:13 just homies being homies
So glad my notifications work. I saw “First start up” and i clicked so damn fast
12:42 DJ hunkered down like a Frenchman at the battle of Verdun💀💀
You really don't realize how tiny Donnie is until Jimmy is standing right behind him leaning over! Donnie honestly looked like a 10 year old kid! LOL
Jimmy is also a giant
Who doesn’t look tiny standing next to Jimmy? 😂
Jimmy hit up NZ wiring for his RB cam trigger kit. Cheaper alternative and very good!
You should get a autodream cam sensor, never have to worry about it
Hey Jimmy, did you know you can bleed a clutch hydraulic system by: opening bleeder, depressing pedal, closing bleeder, releasing pedal. You are simply replacing what was in the lines, with whatever the mastercylinder is pumping out (hydraulic fluid). I find this method much easier than having to pump it up like you would for brakes.
Get you someone that'll hold you like Jimmy O tuning a car
The Greddy manifold looks awsome!😍
I was always under the impression that link g4x on an rb has to have the aftermarket trigger kit or it won't work
That ecu is perfect capable of using the factory CAS it's not the issue
Damn that CAS looked like a pita to do, I did diyautotune opticalwheel on my d21 ka24et and it was soo easy.
Aa520 Nissan manual transmission comes standard with a notchy second gear. Sorry Jimmy.
Thanks for the video Jimmy.👍🏾
Jimmy just casually Leonardo DiCaprio titanic scene’ing tf out Dj😂😂
my sr wont run oem fire order on ecu master black when i put the oem order in it bangs like that. i did that at my old condo and ppl ran outside to see what happend shits crazy
Make sure you haven't snapped the key part off the end of the cam that fits the cas.
John looks so much like a young Bill Murray!!
Yoyo reinforce clutch pedal if it's real stiff my old maxima had an aftermarket exeddy clutch back in day and it was to stiff so I constantly broke clutch pedal assemblies
ditch the CAS. fit trigger kit, the are controlled via Link ECU. the CAS wheel upgrade is to compensate cam belt flap which disturbs timing table on high power pulls but 30 year old tech with multiple points of failure. NZ
You shouldn't need a flex pipe if you added a gearbox exhaust bracket as it would all move together then and the flex would happen on the exhaust rubbers! Its how Toyota and Mazda do it from the factory, generally you only get cracking when aftermarket exhausts don't keep this bracket etc which can also lead to turbo exhaust side leaks!
Nothing like a good old bromance 😂😂
My first thought at the bang was stuck injector hydro lock but idk
It’s nice when jimmy has a tall camera guy helping out so we aren’t looking up at him 😂😂
R33 tractor pulls comming to a town near you !
Most motivational content for swaps
This project is my fav on youtube for some reason.
cuz jimmy
I’m surprised the clutch slaved bled correctly. The bleeder screw is lower than the feed line.
Run a NZ wiring trigger kit since your link Fury ECU
Damn Jimbo, 10% off my wiring harness from Wiring Specialties and now 20% off a clutch from Action Clutch?! Helping my build come in under budget. Now if you could just partner with Z1 or CzP and Kbd bodykits id be set lol.
That f yeah guy is hustlin.
You should see if tommy has one he has almost everything
If you guys would just tell me the song at the end of the video, all your worries would go away! Come on RJ!
Bonsai trees - Apology Note!
@@Josh-eq9oq thank you sir!
Nz wiring trigger kit is the only way to go with rb's
watching this with my 💎✊🏻. Might be able to buy some jdm legends as the short squeeze goes on.
We like the stonks 📈📈📈
#thisistheway
I feel I feel like I've heard somewhere and not to use red lines transmission the oils in Nissan Transmissions because of the brass in the transmission or something like that
A lot of performance cars have brass in the transmissions and you need to run a GL4 rated trans fluid or else the brass will corrode and the trans will slowly turn to shit. I think redline does make a fluid for GL4. My RX7 needs it and I use either Royal Purple or Lucas.
Jimmy is the GOAT
0.25 playback speed at 10:40 has me dying 😂
Thanks for this 🤣🤣🤣
The sky is up!
Jimmy O with the reach around 😆
Why no back purge on any of the welds?
You should hit up tommy fyeah to get a cam angle sensor
Time for a NZ wiring trigger kit mate !!!
you have an own silent bob
be careful with flexible pipes if it breaks it will burn everything around it and i mean EVERYTHING
The Corrado looks nice in the background. lol
10:11 something fishy is going on with dj face
Run a nz wiring trigger
Great video its real to struggle
Should work fine with the standard CAS and wheel
Not always the case, I’m guessing the Link hardware is for a trigger setup and doesnt have the right CAS decoder, fairly common with Nissans
@@Azarathal they've had the Nissan wheel trigger setup in Links for probably 15+ years, since at least the G1s as I've run G1s and my current G4 on RBs with the standard trigger setup. He should be having no problem with it.
where is that cas replacement from? Also why not just get a trigger kit?
missed sumo
i love the r33 content
C0767 gang, if you know you know..
Damnnnnnn 5 hours ago
You def bent the valves when you backfired it
Rjay is gonna get pissed at this but GIVE DJ A RAISE!!!!😂😂😂☠️☠️☠️
What that tool called to widen the mouth of the pipe lol need that
I was just like “oh yeah! First startup!” As I neglect doing my paper.