No, I switched jobs so I'll be getting paid next week so I'll get it then. I have been looking at some basic attachments for it. I think I have everything set.
@@hahn-arms8006 Hey, I got my MPR last week. I already have a Tactical Rifle Vault case for it from Pelican which is very nice. I also ordered a primary arms 1-6x scope for it and I'll order steel magpul offset sights for it as well. My Competitive Blue Radian Raptor charging handle comes in today. Dude I love the way the MPR looks. I'll shoot it soon.
Thanks for the great video. Just got this rifle for Father's day and your video helped quite a bit. I've had quite a few handguns, but this is my first AR and this is exactly what I was looking for. Great content.
WD-40 may not be the best lubricant but it is a great cleaner! Any synthetic motor oil will work just fine for lubrication, even Automatic Transmission Fluid works great as well.
Your very welcome big dog. If you have any problems or issues. Find me on FB at Hahn-Arms. Or ask me on here i just dont always see messages right away on youtube. Your awesome jist take er slow and take pictures the first few times if you need to. 🤙
Hopefully you already got it back in. But if not there are 2 things you can try. 1st put the pin in (halfway) and twist it as you push it in like i did in the video. 2nd you can try to straighten it with pliers the ends tend to gap which is why it wont go back in. Hopefully this helps
New to AR’s and just bought this one last month. Finally got around to shooting it and it would jam every 2 or 3 rounds. A few times when I would get the magazine in after clearing the jam, pull the charging handle back to load the chamber, chamber loaded and I pull the trigger and its like the safety was on. About to tear it down and clean it. Any ideas on my problems and thanks for posting the vid.
HAHN - ARMS cleaned it up and oiled her. Seems like she was over lubricated from the factory and I noticed that was a common complaint. Hoping she works good tomorrow, I’ll let ya know.
@@hahn-arms8006 I figured out attaching the but getting them to stay on. They either come off or loosen when I fire 20 to 30 rounds seeing if you had a trick for that
It also has offset open sights. This rifle was used to hunt coyotes for a while. Which only half explains the light. Before I had my (house rifle) this MPR was also used in the case of home defense. The light works well with both the open sights and the scope. So why not. Great question
Sadly they were once so easy to get you could get them right off ebay for about $3-$5 now with all the media around them some place like ebay wont even allow the sale of parts for them. You can still find firing pins easily for them but they arent as cheap as they once were. Try brownells, midwayusa, numrich, palmetto state armory. If you cant find one at those let me know and ill look.
You can try to (close) the gap by crimping with pliers but it rarely works. You just have to be patient with it. After you do it afew times it becomes natural but it can be a bitch the first few times.
There are a couple of videos that show a simple method for getting that stupid cotter pin back in, basically turning it so the split part is sideways and applying upward pressure (or downwards depending on how your holdingIt!) while pushing it in, it worked like a champ for me, a quick you tube search and you’ll never curse that thing again
Bro putting this cotter pin back in is such a pain in my fucking ass. The only reason I’m here is because I can not for the life of me put this stupid pin back in.
O i feel ya brother it can be a mother FUCKER sometimes. I think i have an actual video on the pin itself. See if you can find it. Take your time and just walk away if you need to. Your awesome brother.
HAHN - ARMS I think the ends are split too much im leaving it in halfway to see if that’ll keep some pressure on it and yeah I’m gonna back to it later. I’ll see if I can find that video. Appreciate the quick response.
Love it I have only gotten info from you to be honest so i appreciate that! And that would be awesome can you include how to remove the handrail/handquard as well? Definitely subbing!
Also I just got a charging handle that makes it a side charging ar only for 150 bucks from devil dogs you should check it out! I like the attachment so far
10-4 ill make a video on how to clean the chamber and rifleing. I can also do a video on the handguard but understand it will differ from every company specs. What do you plan on doin with the stock handguard??
Excellent instructional video. Forgot some of the things we learned in the military. Thanks for refreshing my memory.
Just remember S.P.O.R.T.S for jams and malfunctions.
Just purchased this gun and some people suggested a preclean and lube b4 I use the AR. Your video is great. Thank you so much
Great vid! I just got an MPR, and ive only had pistols. This clears up any questions regarding cleaning 👍
Good video. Thanks! But you should mention that the ejector goes to the left side (viewed from back) when you put the bolt face back in.
Extremely helpful, Thanks for the video, I'll be getting my MPR next week.
Did ya get your mpr ?
No, I switched jobs so I'll be getting paid next week so I'll get it then. I have been looking at some basic attachments for it. I think I have everything set.
Hell yeah ihope ya like it.
@@hahn-arms8006
Hey, I got my MPR last week. I already have a Tactical Rifle Vault case for it from Pelican which is very nice. I also ordered a primary arms 1-6x scope for it and I'll order steel magpul offset sights for it as well.
My Competitive Blue Radian Raptor charging handle comes in today.
Dude I love the way the MPR looks. I'll shoot it soon.
Brother that is freakin sweet man congrats. Im sure you wont be disappointed
Thank you for the close ups, nice job..
Thanks for the great video. Just got this rifle for Father's day and your video helped quite a bit. I've had quite a few handguns, but this is my first AR and this is exactly what I was looking for. Great content.
Hopefully you love it. The MPR is a great rifle
WD-40 may not be the best lubricant but it is a great cleaner! Any synthetic motor oil will work just fine for lubrication, even Automatic Transmission Fluid works great as well.
Thanks for the video. There not much about the mpr out there. This is my first ar extremely helpful
Thats awesome. I hope you like yours.
This was great! Thank you very much for this. Liked and Subscribed.
Thanks for the video! This gives me alot more confidence going into cleaning
Your very welcome big dog. If you have any problems or issues. Find me on FB at Hahn-Arms. Or ask me on here i just dont always see messages right away on youtube. Your awesome jist take er slow and take pictures the first few times if you need to. 🤙
Excellent video, very clear and concise!
Thank you very much for this most helpful video.
This was a great video 🤘🏽
Awesome video. Great job.👍
Let’s just hope it’s as easy for me as you made it look!
I have faith in you. If you have any questions feel free to ask or find me on facebook at Hahn-Arms
@@hahn-arms8006 Thanks I appreciate it!
I can’t get that tiny little pin back in, any suggestions?
It goes in halfway only??….
Hopefully you already got it back in. But if not there are 2 things you can try. 1st put the pin in (halfway) and twist it as you push it in like i did in the video. 2nd you can try to straighten it with pliers the ends tend to gap which is why it wont go back in. Hopefully this helps
thanks for the information, does the gas tube need to be cleaned?
The gas tube is honestly going to depend on how often and how dirty it is. I will clean mine once a year. With about 2000-3000 rounds per year roughly
good stuff brother,thank u sir.
bro i cannot get my charging handle back in, should i put absolute force or am I missing something? thanks
How do you go about cleaning the barrel?
@@gela0701 with a cleaning rod, a bore brush, and a patch. I can do a video if youd like
Stupid question but I’ve pushed the rear pin all the way to the right but the rifle will not fold down. Are you supposed to remove the pin completely?
No. It should fold down. Make sure its out all the way pull in it
If tugging on it doesnt work. Try the front pin. At the same time and remove the whole upper
Well explained 👏🏼👏🏼👏🏼👏🏼
New to AR’s and just bought this one last month. Finally got around to shooting it and it would jam every 2 or 3 rounds. A few times when I would get the magazine in after clearing the jam, pull the charging handle back to load the chamber, chamber loaded and I pull the trigger and its like the safety was on. About to tear it down and clean it. Any ideas on my problems and thanks for posting the vid.
Sounds like its dirty. Try cleaning it first. If that dpesnt fix it get back to me. Your awesome.
Any better???
HAHN - ARMS I’ll find out this weekend and let you know
HAHN - ARMS cleaned it up and oiled her. Seems like she was over lubricated from the factory and I noticed that was a common complaint. Hoping she works good tomorrow, I’ll let ya know.
HAHN - ARMS worked alot better, ran 20 bullets thru with only 2 jams. Need to get more ammo but there was a big difference compared to last time.
Hey just bought the ruger 556 mpr first ar can you make a quick video on which bipod and for-grip did you use and how to mount
Yes, im am so sorry if you are still interested i can make a video.
@@hahn-arms8006 I figured out attaching the but getting them to stay on. They either come off or loosen when I fire 20 to 30 rounds seeing if you had a trick for that
Should you lube the bolt carrier group before reassembly?
Yes
Just curious - why flashlight and scope combo?
It also has offset open sights. This rifle was used to hunt coyotes for a while. Which only half explains the light. Before I had my (house rifle) this MPR was also used in the case of home defense. The light works well with both the open sights and the scope. So why not. Great question
"Brain WTF are you doing using WD40?" I'm DEAD! LOL I just bought one of these and it fires one round and will not cycle any ammo afterwards...
Great video. One question, Ive looked everywhere for an extra firing pin. where the hell do you get them?
Sadly they were once so easy to get you could get them right off ebay for about $3-$5 now with all the media around them some place like ebay wont even allow the sale of parts for them. You can still find firing pins easily for them but they arent as cheap as they once were. Try brownells, midwayusa, numrich, palmetto state armory. If you cant find one at those let me know and ill look.
@@hahn-arms8006 Thanks.
Any other suggestions on that little bastard of a pin other than twisting it?
You can try to (close) the gap by crimping with pliers but it rarely works. You just have to be patient with it. After you do it afew times it becomes natural but it can be a bitch the first few times.
@@hahn-arms8006 thank you, great video as well.
Your very welcome. And thank you
There are a couple of videos that show a simple method for getting that stupid cotter pin back in, basically turning it so the split part is sideways and applying upward pressure (or downwards depending on how your holdingIt!) while pushing it in, it worked like a champ for me, a quick you tube search and you’ll never curse that thing again
I can't get over how much this guy looks like me
Awwwww hell 🤣😂
Thank you sir... :)
thanks for the video!
Your very welcome
No need to clean gas impingement tube? How to?
Would you like to know or see how to clean the gas tube.
What sling do you have?
That was a 2 point sling of ebay. I now have a blueforce 2 point
I honestly recommend any sling honestly. Its going to be what works for you personally
Bro putting this cotter pin back in is such a pain in my fucking ass. The only reason I’m here is because I can not for the life of me put this stupid pin back in.
O i feel ya brother it can be a mother FUCKER sometimes. I think i have an actual video on the pin itself. See if you can find it. Take your time and just walk away if you need to. Your awesome brother.
HAHN - ARMS I think the ends are split too much im leaving it in halfway to see if that’ll keep some pressure on it and yeah I’m gonna back to it later. I’ll see if I can find that video. Appreciate the quick response.
Yeah if its split it can be a pain. Insert and twist the pin while pushing it in
What do you do for the barrel? Just got mine a month ago and finally got a chance to shoot it last week
Use a gun cleaning kit(bore brush) ect. If youd like i can do a video in it. Just let me know. Your awesome
How do you like yours?
Love it I have only gotten info from you to be honest so i appreciate that! And that would be awesome can you include how to remove the handrail/handquard as well? Definitely subbing!
Also I just got a charging handle that makes it a side charging ar only for 150 bucks from devil dogs you should check it out! I like the attachment so far
10-4 ill make a video on how to clean the chamber and rifleing. I can also do a video on the handguard but understand it will differ from every company specs. What do you plan on doin with the stock handguard??