great work, but sir i will need a circuit that will charge the battery, if full the circuit should cut off the charging and pass the current direct if light goes off it should use the 3.7volt
Sir may i ask something?? Because there's a charger here for a portable dvd. It's output is 9.v something like 9.27. I want it to be steped up to 12v so i can use it to charge the 12v 1.3 ah battery. Tnx sir🙂
Nice video bro. Greeting from indonesia. I wanna ask u : 1. If 2ndry coil is substituted to 0.15 mm. Does it make ? If so, how much turns or may be checking ohms ? 2. U'r circuit, for how long time & maximum wattage of lhe/led lamp ? Thanks for u'r answer
Thank you so much friend Better use 0.3mm or also use 0.2mm if you are using 0.15mm I think increase secondary coil turns at least 20-0-20 I think 1-2 hour 5W or 10w Sorry friend I not check it fully on another wats of lamps
I would also ask sir, how if there's no any available 3.7v batteries in the location or place, is it ok to use any voltage? For instance a 6 or 12v motorcycle or car battery? Tnx sir.
Thank you so much for comment friend 6volt can be use no more than 6 volt transister become very hot and die😞 you Can use 5volt Regulater 7805 to convert 12v to 5volt😃
Thanks for comment friend AWG not confirmed sorry for that you can use any gauge wire and friend this inverter is 3.7 volt if you want run it on 12volt you need to change resister value and use 2 transistors in parrallel
Friend? Can a voltage doubler also be used to charge a battery? For example a 6v iron transformer charging a 12v battery using a voltage doubler? Tnx my frnd😀
hello sir kya mai iss se high voltage arc generate kar sakta hu plz tell plz
Awesome very creative like 9
😊😊😊😊😊😊thank you so much
great work, but sir i will need a circuit that will charge the battery, if full the circuit should cut off the charging and pass the current direct if light goes off it should use the 3.7volt
Thanks friend
th-cam.com/video/aHut9HJM4JM/w-d-xo.html see this vid
wow where u buy soldering iron tip...😱😱😁
👍👍👍 nice video
O Thanks dear . Dear Its Just temporary tip.
Wow super nice idea bro 😍
Thank you bro☺️☺️☺️
There's a small ferrite transformer inside. I think that transformer inside must be rewinded that secondary coil increase the turns of wire? Tnx sir🙂
Yes friend you are right
Bhai is mein tape koi or sa laga sakhte hain kiya
What's the efficiency of something like that ?
Not efficient ☺️ this type of Circuit are dangerous for appliances
Only good for lights 😉
I don't have a mosfet can i use transistor?
This is transistor not mosfet
Wire kisi bi gaje ki le saktey he sir reply me
Hmmm guage koi bhi try kar lo Lekin diameter zyada mota na ho
ola boa noite pode me dizer quantas horas é a durabilidade da bateria nesse circuito?
Bro explain in English
No dura nada apenas 30 minutos y chau te lo debo
Sir may i ask something?? Because there's a charger here for a portable dvd. It's output is 9.v something like 9.27. I want it to be steped up to 12v so i can use it to charge the 12v 1.3 ah battery. Tnx sir🙂
THANKS friend 9VOLT TO 12 VOLT BOOSTER CIRCUT CAN CHARGE 12VOLT BATTERY FRIEND I TRY TO MAKE 9VOLT TO 12VOLT CONVERTER
Sir kaya ye possible he ki 3.7v se 220v genrate ho sake mere physics ke teacher kah rahe the ki ye possible nahi he
Thank you for comment bhai ye possible ha voltage 220v sa zyada hote han magar current boht hi kam hota han
Sir sorry me samj nahi paya ki voltage increase ho raha he aur current kam hota he sir explain please
I've never seen such a tip for a soldering iron.
😂😂😂😂
Yes friend i use my soldring iron to melt plastic so my soldring iron tips are dead so i connect this homade tip hehehe
But it work 😂😂😂
Nice video bro. Greeting from indonesia.
I wanna ask u :
1. If 2ndry coil is substituted to 0.15 mm. Does it make ? If so, how much turns or may be checking ohms ?
2. U'r circuit, for how long time & maximum wattage of lhe/led lamp ?
Thanks for u'r answer
Thank you so much friend
Better use 0.3mm or also use 0.2mm if you are using 0.15mm I think increase secondary coil turns at least 20-0-20
I think 1-2 hour
5W or 10w
Sorry friend I not check it fully on another wats of lamps
You don't need a resistor if you have the right amount of winding correct?
Thanks friend for comment
I think not issue of correct winding
Resister is Required because of transister is to hot and dead
@@creativechannelpro371 Ahh makes sense. Thanks friend!
😃😃😃
I would also ask sir, how if there's no any available 3.7v batteries in the location or place, is it ok to use any voltage? For instance a 6 or 12v motorcycle or car battery? Tnx sir.
Thank you so much for comment friend 6volt can be use no more than 6 volt transister become very hot and die😞 you Can use 5volt
Regulater 7805 to convert 12v to 5volt😃
Friend I try my best to make 12volt inverter☺☺☺
Good idea sir. Very nice that's right we can use a LM7805 for lowering a 12v battery very nice idea sir thanks😀
@@reneofngol2398 Thank you so much
60watt bulb connect circuit sir
Kay sir agar ham 3.7v cell ki jagha 24v dc current de too kaya ham 24w ki moter chala sakte he
Nahi ASA nahi hosakta
If I connect 9w led bulb with 3.7v battery backup time
Its depend on battery mah
What is the number of first and second AWG wires, EE65 Inverse from 12v to 220v? Thank you
Thanks for comment friend AWG not confirmed sorry for that you can use any gauge wire and friend this inverter is 3.7 volt if you want run it on 12volt you need to change resister value and use 2 transistors in parrallel
We can use 44n transistor
can i use a ferrite rod from a radio?
yes you can use friend Thanks for comment friend😊😊😊
καλη κατασκεβι μραβο. στο βιντεο βαζετε 23+23 σπιρες και οχι 15+15 !! εχει καπια σιμασια και πιο ειναι το σοστο?
Very good work sir👏
😃😃😃😃😃 I am very happy friend thanks
Sir agar asa hota too itni electricity plant koyo use kiye jate he
WO is liyay ka ya to sirf voltage hi deta ha or wattage phir boht low hoti ha iss liyay app na dekha ka sirf 5w ka led bulb hi glow ho Sakta ha
can the secoundaryturn ratio be reduced to put out 110v? and can 12v work?
Nice Question Dear friend no friend it is not Possible because this types of mini inverters has Thousands of volts but amp is extra extra low
Friend? Can a voltage doubler also be used to charge a battery? For example a 6v iron transformer charging a 12v battery using a voltage doubler? Tnx my frnd😀
Nice idea happy new year friend😃😃😃
Good works keep it up!
Thank you so much bro🙂❤️
What is the running time for the inverter when carried the load?
1 hour with good heatsink
Sir is it ok to use larger and larger transformer? Tnx sir🙂
Yes friend you can use 😄😄😄😄😄😄😄
Maybe iam going to try a 60 amp transformer to make it more and more powerful😀
@@reneofngol2398 Very Nice You are Genius friend
Req, ferit driver transistor series tip 6amp 17amp TR
Supply 12v 5a/10a
DEAR Friend can you explain me in english thank for comment
The smps charger here is 9v 1.5 amps
Muito bom top
Is it real?
Which one is primary?
Thin wire 0.1mm
Very good
Thank you so much dear friend
I appreciate bro!
Thanks
Good morning friend!
Good morning friend how are you
niceeeeeeeeeeeeeeeee
Thanks
Tnx sir
Niceeeeeeeeee
Thanks
Nice sir
Thanks dear friend😊😊
kitne time tak kaam karta h
I think 1 hour
Parrallel 2 transister for long time
No music only comment
Thanks friend
Itu lagu apa
Wariyo mortal
@@creativechannelpro371 kamu kok bisa bahasa Indonesia
Bro I translate your language from Google translater
Apakah bisa kita membuat inverter 3 v to 12 volt dari mesin lampu CFL
No brother
🙂
😃