ambition torped and kuark battery pack Best budget friendly tattoo machine? Pt1 of 2 review
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2023
- Ambition torped 4.0 ,4.5,5.0 stokes and 10hr ambition kuark review
www.amazon.com/gp/aw/d/B0BJ6D...
www.amazon.com/gp/aw/d/B0CC8S...
Thing looks so sick like the way it’s so simple I’m sure it will easy to do any repairs or upgrades and it can be cleaned and even has different strokes I think this is the best idk tho how do you recommend it like now
No it was junk don’t waist your money
@@Tattoo4you ok was it the motor
@@Tattoo4youwait why can you explain
Somehow I’m back watching the same video I want it but I kinda like running the cord and all and this looks awsomeeee how do you recommend it for a liner and what cam would you use? Because some people said lining is better with the 5mm cam idk?
The torped was trash didn’t work with any needle brands I had on hand and the higher the cam the harder the machine hits so better for lining and color packing
@@Tattoo4youbut why would the needle act so different on a coil machine vs rotary like could machine would be set up with a 2.5mm stroke so how can the rotary use 5mm is the way they measure it different or how can this be hahah
I like your video very much~
May I have a chance to work with you?
Looking forward to hearing from you
Rose
I got the CNC Q2 and it’s good it just feels like it doesn’t like running over 8v and it’s just a weak motor idk maybe my battery is weak and not consistent
Which cam do you have in it I have 4 cnc Q-2’s and zero issues I run mine regularly at 10-11 volts it’s probably your battery
@@Tattoo4you reallly I have the 3.5mm cam and even the owners manual says not to go over 8 or 9 volts
@@Tattoo4you I’ll take a video of the manual I got and post it on TH-cam one sec, it will be on my channel shortly
@@Tattoo4you ok I just posted it on my channel brotha
I under stander they say not to go over 8volts I run mine higher zero issues if your not comfortable with that go low and slow
So on a rotary the 5mm is actually better for lining ???? Because I used coils years ago and used 2.5mm to line good and now with my cnc q2 I can’t get good lines, it’s a 3.5mm stroke
So the way strokes work the lower the cam stroke the softer it hits so if it’s a 2.5 or 3.0 it’s good for soft shading and color blends the higher the cam stroke the harder it hits so if it’s a 4.0-5.0 it’s good for lining and color packing also the bigger the cams it makes it easier to use larger needle groupings on average I’m running 14-18rl bug pins so I use my 4.0 cam stroke I can use the 3.5 but it won’t run as smooth and hit as hard so you’d have to go slower with the 3.5
@@Tattoo4you awsome honestly I used coil machines and this makes no sense but rotary machines are different but you explained it awsome thank you
It’s the same on a coil machine the stroke is how far the needle travels up and down so the longer the stroke the more energy builds up before hitting the skin so it’s hitting harder think of a rubber band have you ever put one between your index and thumb grabbed it with the other hand pulled back and slapped yourself or someone else if you don’t pull hard it doesn’t hurt much causing little trauma but if you pull back far it really hurts causing a lot of trauma that’s kinda how the stroke is on a tattoo machine bigger stroke harder hitting machine equals good liner and color packer smaller stroke equals good shader I hope this helps I know that’s a huge run on but I’m half a sleep here
@@Tattoo4you but that’s what is so confusing on a coil machine you would use a lowwww mm of travel to line so why on rotary do you go the opposite way and go for a bigger like 4.5mm stroke it makes no sense to me still like why would they be treated differently like I get the longer stroke the harder the hit, but what’s that have to do with anything we don’t even have a way to measure that hit we only have hertz and that’s confusing as well sorry I don’t get this at all how can a coil machine have way different rules than rotary and if so why can no one explain it gaha
I’m not the expert on coils I did run them for for a bit when I first started out never a fan myself and almost instantly switched to traditional rotary’s I do know with coils you can have larger and smaller coils depending on the wrap of the coils and thickness and length of springs the stroke could be different I guess but from my experience the strokes were roughly the same as pen style rotaries the only way I see you running a 2.5 stroke on a coil is if it had really beefy machine with think coils and springs again I’m no expert on coils sorry I couldn’t be more help
How are you liking it so far? Is the Torped still going strong? Just ordered one yesterday
You really should check out part 1 and 1/2 and part 2 absolute garbage
The Ambition Torped is badass! I also purchased 2. I’m gonna get the pink one cause that’s the last one I need.
@@Tattoo4youwait it was all bad ??