@nobby-green Evening, just tried this several times and despite clicking install now on restarting the rc still shows v1.13.9(1055-dpad) can you confirm your rc went to v1.13.10 or simply suggested it was after selecting install now. I managed to get the rc to .1600 via assistant 2 before hand but no option to add fly via that route. Cheers!
@@ImJensenKing I had to reset my controller to factory reset to get it to update to 1.13.10👍 I tried 3 times before and it wouldn’t update. Since the restart and update the controller seems a lot faster and smoother👍
Looks like since releasing this video the RC firmware update is now not available. This has happened in the past and probably another firmware will be released by DJI. I do know some have already been successful in downloading 👍
That was going to be my next question, i updated my Mini 3 Pro today and the RC didn't update and was going to ask why. I will wait until it becomes available.
Forum updates by DJI bots state the mini3pro fw 0800 has been pulled. If they pulled 0800 there must be an issue & there is no update when replacement fw will be issued, now I have a drone on 0800 but an rc still at 1400. There has been no comment on why rc fw 1600 didn’t remain available…. Another chaotic release from DJI. Think @nobby-green needs to dig deeper as he has both fw installed.
Your question concerning the use of the extended plus battery after this firmware update. All went well. Both take off and navigation. Thank you for all you do.
I'm just learning about the DJI mini 3 as I just got it a week ago. Could you answer me a question please? There is a slot for the the micro SD card in the drone and also in the controller. I can see videos I have taken while the drone is on but with it shut off theres no videos on the controller. What is the purpose of having two SD cards? Thanks. Great video by the way.
@@nobby-green Thanks for the speedy reply. I appreciate it and will subscribe. Is there a setting on the controller then to record on it? So far I'm just recording from the drone and can watch it while it is turned on.
@@kerrylittle3900 yes there is. If you swipe down twice it will reveal a black menu screen. On there you will see a button to screen record. They should be saved on the sd card. There are quite a few mini 3 pro videos on my channel 👍
Not sure if it's a UK thing but the most recent update to my DJI mini 3 pro gives my ActiveShots / Spotlight / and POI under the tracking modes and under ActiveShots specifically gives me a manual and parallel modes
@@nobby-green Ok. Thanks. I also noticed that I cannot turn on subject tracking pre flight as I could before. The option is greyed out. It appears that you can only activate subject scanning once you're in active flight. Not really a fan of this considering I prefer to change/edit all my setting prior to take off, unless I'm maybe updating my home point.
@@sarge502jeep subject tracking as always been like that. You have to be in flight to enable it. Once it’s enabled it will stay like it when you take off again 👍
@@nobby-green oh I wasn't aware I'm still pretty new to the drone although it's a mini 3 pro. So not sure what all it started with. I could have swore that feature was changeable pre flight. But guess not. Thanks.
Greetings from the other side of the pond! We have the Mini 4 Pro and love it, but the more I hear about the Mini 3 pro makes me wonder if the the Mini 3 would have been a better place to start. It looks like it is also a fantastic drone. Thanks for the video!
@@MyMaineDrone the mini 3 Pro is an excellent drone however I believe you made the right choice in getting the 4 as it has many more features as I’m sure you are aware. Thanks 🙏
Some have problems with over heating, but ive not had any to be honest. I think it depends on internet speeds and how quick it updates. Ive heard of some that put fans on to keep it cool.
Although I dont own my mini 3 pro anymore but still have to update it for the new owner family member, lol As always nobby thanks for the testing and valuable information 👏👍
I just updated my M3P and RC. But mine is different you yours. App version 1.13.1 (yours shows 1.13.9) aircraft firmware is the same 01.00.800, RC firmware 01.03.1400 (yours shows 01.03.1600), but my flysafe data is 01.00.01.34 (yours shows 01.00.01.33)
Hi Nobby, I'm in Australia and have been trying to update from v1.13.1 to the latest Fly App 1.13.9 version on the DJI RC , but without success. Attempted various methods but still get pop up saying Fly App is up to date.🤔 Any ideas?? Kaz, Sydney
Wish I hadn't updated!! I've been here before. Updated the a/c firmware yesterday and today discovered something interesting but more annoying. I have a Battery Plus (3850mAH or 3.850AH Capacity) that I sometimes use when I am flying in the A2 SubCat. Now when I insert the battery, I can power up but unable to start the motors. Warning sign pops up ' Not DJI Battery' This didn't occur previously and indeed have flown with it many times. I purchased the Battery Plus quite some time ago from the US. I've just looked and confirmed there is no DJI Manufacturer reference, although the 'Made in China' stamp is present. Oh well, I guess DJI don't always reveal all the details in their firmware updates and I'm not surprised.
@nobby-green The A/C, RC and Fly App have latest versions. Tapping on the Non DJI Battery banner on the screen provides you with: "Non DJI Battery detected. Unable to fly. Code: 1610004F". This is the DJI code for non DJI Battery. I guess if my battery was a genuine DJI battery, it would be okay. I think DJI got wind of people using non DJI Battery projects and closed this down.
Hello Nobby Green, They really keep after the older mini 3 pro for sure. I am having a nerve issue in my right side with that large painful nerve so I retired to rest good. Not sure If I ever return. Some psychiat nerve event. I got xrays and get to the va clinic tomorrow to see what happened. I see many people get that sometimes. It is my turn, LOL, pain is awful in morning time. So I have not flown except quick tests like you. Heat, storms and rain are as bad as you there too. When you look at the weather taking off is that looking west to the atlantic? I have only done little area flights to keep things running as I have a lot of drones. I am a pro drone baby sitter now, LOL. One new battery for the mavic 3 NEW will not activate or even charge so down to 2 now. I asked for a return and am waiting. I again just did the mavic 3 pro tonight so it is okay. Thanks for the update video as I like to see you doing it and again well done. All is well here except way too hot to fly at all. I put the pad out, start controller, put drone on, put it on pad, t/o immediately. They never overheat if you fly so all is well. With you good fortune mister. Ray C in Florida
I just checked for updates here in Ireland, sadly just the aircraft updated to version 01.00.0800, RC firmware still on 01.03.1400 and fly app 1.13.1 lol What more can one do :)
Your little white dog has cool blue sunglasses 🍻🐕looking forward to the video about the dongle for the Air 3, I hope you test it streneously... I'm think of getting one for my Air 3... I sometimes lose signal briefly when filming big ships, this is perhaps due to the ships own radar systems.
I just did an update, Sunday morning 21st of July at 11.00 CET, and my App version is now at 1.13.1, your's is at 1.13.9 - Aircraft Firmware is at 01.00.0800, same as yours, and my RC Firmware is at 01.03.1400, yours is at 01.03.1600. When I check for updates it says it's updated. Why am I not getting the latest APP version and RC Firmware? What do I do wrong anyone? Please help
@@OrjanB I don’t think you are doing anything wrong. Sometimes these updates get stuck. I had to reset my controller yesterday to get the 1.13.10 to update. 👍
@@nobby-green Thank you for replying so quickly 👍 I just did a factory reset on the controller, connected it to wifi again and logged into my Dji account. Then I checked for firmware updates both before and after powering up the mini 3 pro drone. Same result now, still at 1.13.1 and 01.03.1400. This is frustrating. Was it a factory reset on your controller you had to do?
@@OrjanB I had to do a factory reset to bring forward the 1.13.10 but not the original updates. Very odd 🤷♂️ unless their servers are struggling with this global internet issue?
@@nobby-green Now this is getting weirder. I just swapped the battery to a fresh one and then it found a firmware update. Happily I installed it and when I checked the versions again they had not changed at all. I rebooted everything and checked again, but was again told all firmwares are up to date. So I just did a firmware update, but the numbers did not change. Great DJI... You sir @nobby-green just got a new subscriber from Norway. Thanks for your video and great support 👍
@@OrjanB maybe that was a battery update? It’s so frustrating at times with updates I do feel your pain. Thanks for the sub and welcome to the community 👍 one more question did you check for updates in the about tab on aircraft firmware and also under profile settings and about? Might help enabling the slide for check for updates automatically 👍
Saw your vid and attempted to download but as you have stated it is not available now. I tried everything I knew and then only now saw your message re now not available haha. Thanks anyway
@@nobby-green thanks for the reply, I was notified I wasn't sure if it was just a generic thing but it's just a tax that I have to pay,.. which I will... once the weather is better. It's been a year and great fun thanks for all the advice tips Much appreciated
One of my drones is a 2018 Fimi X8. Only downwards sensor and it have waypoints. Even with no comms between controller and drone, it still continues to each waypoint.
@@TripleU-E really 🤔 it’s the biggest update for months. Aircraft and RC firmware updates. Most have been stuck on 1.13.4 for ages and some even from 1.13.1. Now the latest fly app 1.13.9. Over a gig in size. If you consider that click bait then good luck. 😁
Hey Nobby, just another thing. I believe that there are many hoops to jump through regarding the 4G dongle for the Air 3 etc... Ofcom regulations... But I'm sure you are aware by now.
@@martinhub3737 as stated in other comments it’s the biggest update for a long time bringing aircraft and RC firmware updates along with the latest fly app. 👍
@@FlyingBeeFPV thanks for the comment. Not that I need to justify to anyone around the thumbnail and title, the term Huge was used because this is the largest update for the mini 3 in months which at the time of recording brought an aircraft and Rc firmware along with the latest fly app. Just because it didn’t bring any new features doesn’t mean it’s a bad thing. It potentially fixes issues that some have been having since the last update. Thanks for watching and it is your choice to sub or not 👍
@@composedlight6850 brings the aircraft, controller up to the latest firmwares and the latest fly app which have been out of date for months. It’s not always about new features.
Just as an update to this video. For those that were struggling to update you might want to check again. 1.13.10 is now available for the RC 👍
@nobby-green Evening, just tried this several times and despite clicking install now on restarting the rc still shows v1.13.9(1055-dpad) can you confirm your rc went to v1.13.10 or simply suggested it was after selecting install now. I managed to get the rc to .1600 via assistant 2 before hand but no option to add fly via that route. Cheers!
@@ImJensenKing I had to reset my controller to factory reset to get it to update to 1.13.10👍 I tried 3 times before and it wouldn’t update. Since the restart and update the controller seems a lot faster and smoother👍
@nobby-green Time for another update Nobby …. 01.00.0900 landed already!
@@ImJensenKing yes just downloaded. Will have a review out tomorrow 👍
Looks like since releasing this video the RC firmware update is now not available. This has happened in the past and probably another firmware will be released by DJI. I do know some have already been successful in downloading 👍
MI5 got wind of it.............
That was going to be my next question, i updated my Mini 3 Pro today and the RC didn't update and was going to ask why. I will wait until it becomes available.
Forum updates by DJI bots state the mini3pro fw 0800 has been pulled. If they pulled 0800 there must be an issue & there is no update when replacement fw will be issued, now I have a drone on 0800 but an rc still at 1400. There has been no comment on why rc fw 1600 didn’t remain available…. Another chaotic release from DJI. Think @nobby-green needs to dig deeper as he has both fw installed.
@@ImJensenKing usually when they pull a firmware they issue another one not long after. Time will tell I guess 🤷♂️
@@nobby-green Simple is sometimes best 😉
Thanks once more Nobby.
@@PhreddCrintt cheers Mike 👍
Nice and informative video, it was good to catchup today, keep up the good work.
@@robhamps thanks Bob yes it’s been a while and good to see you 👍
Your question concerning the use of the extended plus battery after this firmware update. All went well. Both take off and navigation. Thank you for all you do.
@@tnhwyman thanks for letting me know 👍
Thank you , Nobbygreen. I Appreciate The Fantastic Update Information... On The DJI Mini Pro 3. Happy Flying!
Be Good Now.
@@paullthomas8064 thanks Paul 👍🙏
Great to know the Mini 3 Pro is still getting updates. Shame it’s not compatible with the new RC2. Thanks Nobby 👍
Yes indeed. It will never be compatible because of the difference in the ocusync. Thanks
Thanks as always for the heads up on updates. Great overview, Nobby, and I am going to get right on it.
@@georgekelly1948 no problem 😉 thanks George 🙏
I'm just learning about the DJI mini 3 as I just got it a week ago. Could you answer me a question please? There is a slot for the the micro SD card in the drone and also in the controller. I can see videos I have taken while the drone is on but with it shut off theres no videos on the controller. What is the purpose of having two SD cards? Thanks. Great video by the way.
The purpose of the SD card in the controller is to be able to record the screen recordings, and to download offline maps. Hope this helps.
@@nobby-green Thanks for the speedy reply. I appreciate it and will subscribe. Is there a setting on the controller then to record on it? So far I'm just recording from the drone and can watch it while it is turned on.
@@kerrylittle3900 yes there is. If you swipe down twice it will reveal a black menu screen. On there you will see a button to screen record. They should be saved on the sd card. There are quite a few mini 3 pro videos on my channel 👍
@@nobby-green Ok great. Thanks for showing me that. So much to learn but I will keep watching your excellent videos.
Thank you for taking time to update us all. Appreciate that 👍🏻
@@Lee-gsx you’re welcome ☺️ 👍
Not sure if it's a UK thing but the most recent update to my DJI mini 3 pro gives my ActiveShots / Spotlight / and POI under the tracking modes and under ActiveShots specifically gives me a manual and parallel modes
@@sarge502jeep yes that’s correct 👍
@@nobby-green Ok. Thanks. I also noticed that I cannot turn on subject tracking pre flight as I could before. The option is greyed out. It appears that you can only activate subject scanning once you're in active flight. Not really a fan of this considering I prefer to change/edit all my setting prior to take off, unless I'm maybe updating my home point.
@@sarge502jeep subject tracking as always been like that. You have to be in flight to enable it. Once it’s enabled it will stay like it when you take off again 👍
@@nobby-green oh I wasn't aware I'm still pretty new to the drone although it's a mini 3 pro. So not sure what all it started with. I could have swore that feature was changeable pre flight. But guess not. Thanks.
@@sarge502jeep No Problem 😀
Many thanks for the news about the update.
@@JohnnyBouchier you’re welcome ☺️ 👍
Greetings from the other side of the pond! We have the Mini 4 Pro and love it, but the more I hear about the Mini 3 pro makes me wonder if the the Mini 3 would have been a better place to start. It looks like it is also a fantastic drone. Thanks for the video!
@@MyMaineDrone the mini 3 Pro is an excellent drone however I believe you made the right choice in getting the 4 as it has many more features as I’m sure you are aware. Thanks 🙏
@@nobby-green Very True, I am learning them one at a time and trying to apply them to my flying and videos! There is SOOO much to learn!!
@@MyMaineDrone great stuff 👍 enjoy ☺️
Thanks Nobby , your videos are awesome , well done mate..
@@yamonda900 thanks buddy 👍
thanks Nobby flying friend
@@ecosseskyview you’re welcome ☺️ 👍
Hi Nobby - do you find aircraft can get too hot and turn off doing updates?…..great videos by the way…..
Some have problems with over heating, but ive not had any to be honest. I think it depends on internet speeds and how quick it updates. Ive heard of some that put fans on to keep it cool.
lol.. I'm sure the neighbor wouldn't mind... that was hilarious...
@@WeretheRoberts well let’s put it this way, he wouldn’t know as he’s moved out haha
🤣😅🤣🍻
@@chriscapune7873 😆
Although I dont own my mini 3 pro anymore but still have to update it for the new owner family member, lol As always nobby thanks for the testing and valuable information 👏👍
@@jimthorleydronefootage no problem 😉 👍
I just updated my M3P and RC. But mine is different you yours. App version 1.13.1 (yours shows 1.13.9) aircraft firmware is the same 01.00.800, RC firmware 01.03.1400 (yours shows 01.03.1600), but my flysafe data is 01.00.01.34 (yours shows 01.00.01.33)
@@OldGit62 looks like it’s been pulled for some reason. Probably another to be released soon 👍
After i update my extra batts. not working anymore , non DJI battery error. is it possble it could be fix next update??
@@JEEDSSD they stopped that a few updates ago for non DJI batteries 👍
Thank you so much for this video . Really appreciate it
@@haroonvlogs5437 you’re welcome ☺️ 👍
Hi Nobby, I'm in Australia and have been trying to update from v1.13.1 to the latest Fly App 1.13.9 version on the DJI RC , but without success. Attempted various methods but still get pop up saying Fly App is up to date.🤔 Any ideas??
Kaz, Sydney
@@barnseyk8188 it looks like DJI may have pulled the rc update for some reason. Maybe there will be another one soon. This has happened before. 👍
Thank you! 👍🐾🐈⬛🍻🐝
@@chriscapune7873 you’re welcome ☺️ 👍
Cheers Nobby 😉👍
@@droneartmedia you’re welcome Graham 👍
Wish I hadn't updated!! I've been here before. Updated the a/c firmware yesterday and today discovered something interesting but more annoying. I have a Battery Plus (3850mAH or 3.850AH Capacity) that I sometimes use when I am flying in the A2 SubCat. Now when I insert the battery, I can power up but unable to start the motors. Warning sign pops up ' Not DJI Battery' This didn't occur previously and indeed have flown with it many times. I purchased the Battery Plus quite some time ago from the US. I've just looked and confirmed there is no DJI Manufacturer reference, although the 'Made in China' stamp is present. Oh well, I guess DJI don't always reveal all the details in their firmware updates and I'm not surprised.
@@CLLUK are you on the latest fly app 1.13.10?
@nobby-green Hi, Yes. Tomorrow going to look into this more thoroughly. Will report back k. Thanks
@nobby-green The A/C, RC and Fly App have latest versions. Tapping on the Non DJI Battery banner on the screen provides you with: "Non DJI Battery detected. Unable to fly. Code: 1610004F". This is the DJI code for non DJI Battery. I guess if my battery was a genuine DJI battery, it would be okay. I think DJI got wind of people using non DJI Battery projects and closed this down.
New firmware update out today . Can you please do an update and test video ? Mini 3 version released today I think
@@haroonvlogs5437 sure no problem. Thanks 🙏
I updated mine this morning.
@@Beecher_Dikov great stuff 👍
Thanks for the information
@@terryrccrazy6993 your welcome Terry thanks 🙏
what's the meaning of this video?? There is an update... i click "update".. it updated... i dunno what changed but it works....
@@donciak it’s all in the video. Firmware and fly app update 👍
Hello Nobby Green,
They really keep after the older mini 3 pro for sure.
I am having a nerve issue in my right side with that large painful nerve so I retired to rest good. Not sure If I ever return. Some psychiat nerve event.
I got xrays and get to the va clinic tomorrow to see what happened.
I see many people get that sometimes. It is my turn, LOL, pain is awful in morning time.
So I have not flown except quick tests like you.
Heat, storms and rain are as bad as you there too.
When you look at the weather taking off is that looking west to the atlantic?
I have only done little area flights to keep things running as I have a lot of drones.
I am a pro drone baby sitter now, LOL.
One new battery for the mavic 3 NEW will not activate or even charge so down to 2 now.
I asked for a return and am waiting.
I again just did the mavic 3 pro tonight so it is okay.
Thanks for the update video as I like to see you doing it and again well done.
All is well here except way too hot to fly at all.
I put the pad out, start controller, put drone on, put it on pad, t/o immediately.
They never overheat if you fly so all is well.
With you good fortune mister.
Ray C in Florida
@@Air_Devil_Leader_One keep well Ray and happy flying 👍
I just checked for updates here in Ireland, sadly just the aircraft updated to version 01.00.0800, RC firmware still on 01.03.1400 and fly app 1.13.1 lol What more can one do :)
@@PilotsError it’s very odd. A few have reported the same issue. Keep checking maybe DJI pulled it for some reason 🤷♂️
@@nobby-green Will do mate, hopefully for those that got it they're ok :)
@@nobby-green Checked again this morning and it's all updated to the latest :)
I just updated my M3P and RC. But mine is different you yours. App version 1.13.1 (yours shows 1.13.9)
@@chrisdavies589 see pinned comment 👍
Hey Nobby .. well picked up … is this for mini 3 too … great work ✌️🙏
@@shinertom142 not sure as I don’t have the mini 3. But my guess is if you use the DJI RC there might be 👍
@@nobby-green cheers Nobby …I’ll give it a go
@@shinertom142 let me know how you get on 👍
@@nobby-green Hey Nobby … no update on mini 3 or RC 1 controller,
@@shinertom142 that’s odd. Have you tried under profile and settings? 👍
Your little white dog has cool blue sunglasses 🍻🐕looking forward to the video about the dongle for the Air 3, I hope you test it streneously... I'm think of getting one for my Air 3... I sometimes lose signal briefly when filming big ships, this is perhaps due to the ships own radar systems.
@@MavericksDrone white dog? 😜 never seen one haha. Yes I need to order one when they back in stock 👍
@@nobby-green the dog statue in your back garden (saw it as you landed the drone in this video)
@@MavericksDrone oh I see haha 😜
I just did an update, Sunday morning 21st of July at 11.00 CET, and my App version is now at 1.13.1, your's is at 1.13.9 - Aircraft Firmware is at 01.00.0800, same as yours, and my RC Firmware is at 01.03.1400, yours is at 01.03.1600. When I check for updates it says it's updated. Why am I not getting the latest APP version and RC Firmware? What do I do wrong anyone? Please help
@@OrjanB I don’t think you are doing anything wrong. Sometimes these updates get stuck. I had to reset my controller yesterday to get the 1.13.10 to update. 👍
@@nobby-green Thank you for replying so quickly 👍 I just did a factory reset on the controller, connected it to wifi again and logged into my Dji account. Then I checked for firmware updates both before and after powering up the mini 3 pro drone. Same result now, still at 1.13.1 and 01.03.1400. This is frustrating. Was it a factory reset on your controller you had to do?
@@OrjanB I had to do a factory reset to bring forward the 1.13.10 but not the original updates. Very odd 🤷♂️ unless their servers are struggling with this global internet issue?
@@nobby-green Now this is getting weirder. I just swapped the battery to a fresh one and then it found a firmware update. Happily I installed it and when I checked the versions again they had not changed at all. I rebooted everything and checked again, but was again told all firmwares are up to date. So I just did a firmware update, but the numbers did not change. Great DJI... You sir @nobby-green just got a new subscriber from Norway. Thanks for your video and great support 👍
@@OrjanB maybe that was a battery update? It’s so frustrating at times with updates I do feel your pain. Thanks for the sub and welcome to the community 👍 one more question did you check for updates in the about tab on aircraft firmware and also under profile settings and about? Might help enabling the slide for check for updates automatically 👍
Aircraft update done but the controller update not available yet 👍
@@madmech35 yes some are reporting the same issue. Very odd 👍
@@nobby-green thanks for responding 👍 it’ll be available soon no doubt 🧐 probably just a regional release lol
@@madmech35 happened before on other updates
Thanks for the heads up Nobby. I will get mine updated today.
@@bobwhitewo3b you’re welcome Bob 👍
Did you get muddled at the end there? You mentioned an update for RC2 also… was that a mistake or is there? I haven’t checked yet.
@@SightsWithSteve no I said the RCN2 controller. Nothing on the DJI RC2. That’s up to date 👍☺️
@@nobby-green tidy, great work as always 👍🏻
@@SightsWithSteve thanks Steve 🙏
Saw your vid and attempted to download but as you have stated it is not available now. I tried everything I knew and then only now saw your message re now not available haha. Thanks anyway
I quit doing updates on any of my drones that are flying good. DJI never dies tell you what they are really updating anyway.
@@dheller777 yep although this one brings the latest fly app 👍 still your choice buddy 👍
Mavic 3 Classic update as well
@@Motorhoming_Fun thought there might be. Thanks for sharing 👍
Do I need to renew my operator ID every year if i still own the same drone registered to me ?
@@readmore4342 you will be notified when it’s about to run out 👍
@@nobby-green thanks for the reply,
I was notified I wasn't sure if it was just a generic thing but it's just a tax that I have to pay,.. which I will... once the weather is better.
It's been a year and great fun thanks for all the advice tips
Much appreciated
Shame it did not add waypoints!
@@andrewchesney that would be nice but I doubt that will ever come as it doesn’t have OA all round 👍
One of my drones is a 2018 Fimi X8. Only downwards sensor and it have waypoints. Even with no comms between controller and drone, it still continues to each waypoint.
same here my first ever drone husan zino wz only downside sensor have waypoint too
how is the update of the remote possible on the officeel site of dji it says 1,0,3,1400
@@bstyle1980 that’s probably because they haven’t released it on their site yet 🤷♂️
@@nobby-green I also don’t see the update on my remote stuck on 1400
@@bstyle1980 maybe try a little later could be busy servers. 👍 you are using the DJI RC?
@@nobby-green yup
Same no controller update only showed up for the drone, wonder if the rc update has been pulled wouldn’t be the first time.
sorry, but the thumbnail is pure clickbait! Huge update…
@@TripleU-E really 🤔 it’s the biggest update for months. Aircraft and RC firmware updates. Most have been stuck on 1.13.4 for ages and some even from 1.13.1. Now the latest fly app 1.13.9. Over a gig in size. If you consider that click bait then good luck. 😁
@@nobby-green I knew, that you will use the file size as your justification …😉
@@nobby-green good luck with what ? What are you wishing him good luck for ?
@@BananerRepublic thought that was obvious 🤷♂️
So what is the use I a big update if there noving new I feel like it's bogus
@@alexvanwezel1404 how can it be bogus? 🤷♂️ latest fly app installed. If your doubtful don’t update simple 👍
Nobby some just need something to complain about
Regards
Lou
@@nobby-green
Hey Nobby, just another thing. I believe that there are many hoops to jump through regarding the 4G dongle for the Air 3 etc... Ofcom regulations... But I'm sure you are aware by now.
@@MavericksDrone yes a lot is being interpreted since the release. 👍
We need 4k100 just like mini 4 pro. After all it is same camera.
@@SamoSloga that would be nice 👍
Thanks for the heads up mate
@@johnnymac26 no problem mate 👍
Thanks for the heads up and happy to see everything is working. I get very nervous when it comes to updates.
@@blackydon your welcome. Should be good to go 👍
A huge update… But there is nothing to tell about it apart from mentioning the numbers multiple times?
@@johanelzenga 🤷♂️
Mini3pro is still popular and active 😊
@@kamikazekaos it sure is man 👍
Why you call it huge?
@@martinhub3737 as stated in other comments it’s the biggest update for a long time bringing aircraft and RC firmware updates along with the latest fly app. 👍
I feel the term huge firmware update is I little exaggerated und clickbaity *not subbed for that reason* otherwise keep up the good work
@@FlyingBeeFPV thanks for the comment. Not that I need to justify to anyone around the thumbnail and title, the term Huge was used because this is the largest update for the mini 3 in months which at the time of recording brought an aircraft and Rc firmware along with the latest fly app. Just because it didn’t bring any new features doesn’t mean it’s a bad thing. It potentially fixes issues that some have been having since the last update. Thanks for watching and it is your choice to sub or not 👍
So it does nothing if your Drone is working correctlyb. No new features 😂
@@composedlight6850 brings the aircraft, controller up to the latest firmwares and the latest fly app which have been out of date for months. It’s not always about new features.