How to Use FSESC 75100 Pro with Alu PCB for E-Scooter丨FLIPSKY
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Hello guys! This video will show how to apply the FSESC 75100 Pro to an electric scooter and demonstrate the operation of motor matching and ADC parameter settings.
FSESC 75100 Pro with Alu PCB-shorturl.at/gmrCE
Follow Us On Social Media, thanks!
/ flipsky_tech
/ flipskytech
#flipsky
#vesc
#escs
#diyesk8
#flipskytech
how to install pas sensor? I want to build an electric bike
Hello sir, which brand of PAS do you want to use? Can you send the link of the product to our email? Our engineers will see if it can be adapted with our ESC.
Please send relevant consultation emails to our after-sales mailbox: flipskytech@outlook.com/flipsky-service@outlook.com for consultation.
the motor i have uses ring terminals, is there any way to make the flipksy 75100 pro v2 compatible with it wothout soldering new plugs?
Get a converter
I have 75100 pro v2 version and 52v lcd throttle for emove cruiser that has 52v red wire, DMS wire, GND, TX, RX and SD. I connected GND to flipsky GND, 52v wire to battery+, TX to flipsky RX, RX to TX on flipsky but i don't have speed info on my lcd, in the vesc app it is displayed though. The vesc tool app settings are ADC and UART. Is there any setting i need to turn on for speedometer to work?
Hi, the lcd can not use with the 75100. The ESC only support our tft display. But the throttle can work with the ESC
you need to use bolt screw and not wires so that one can use custom wiring
Thanks for your suggestion.
Can i use it on a electric 52v electric scooter?
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website.
How do you hook up a key switch to this model
This ESC doesn't switch functions. If you want to use a key switch you can try to use 75100 pro v2.0 tinyurl.com/59wsr2es
Hello, can I just program it using my iPhone or do I need a laptop for it? and where can I get a Bluetooth module for it?
Yes. The pro version has built with bluetooth module. You can use the vesc_tool mobile APP to do settings directly. Our bluetooth module supports both IOS and Android app. If not so sure the process, please send the e-mail to our service team flipskytech@outlook.com or fs_service@flipsky.net. Thank you.
Does this works on ios now? The 75100 pro? Or still just for android
Hello sir.
The Bluetooth module also supports the IOS system, and the IOS side can download VESC Tool in the APP store.
how to install and programme a gear selector for 75100 pro V2.0?
i want to have 1/2/3 gears for easy move off
@@zeal8326 This esc based on vesc does't support 3 speed levels throttle gear. Our new none vesc escs can be used with this kind of gears. Thanks.
@@FlipskyTech sad to hear..
How is a 2 pin brake lever connected?
Hello, sir.
After testing by engineers, our ESC needs to be connected to 3.3V, ADC2 and GND ports at the same time when connecting to the brake handle. The 2pin brake cannot be used with our ESC.
@@FlipskyTechgood to know. I'm upgrading from an oem kit controller this weekend.
What do give up not having the brake levers wired up?
Is it just the motor cutout?
Is regen a function of backing off on thr throttle?
If all Inlose is motor cutout, I wont replace the levers until I switch to hydraulics.
@@Zomby_Woof Just attaching the throttle grip (stick), releasing the throttle will only disconnect the motors from control, and the motors are in free coast. If the brake lever is connected, energy recovery will be performed when braking.
How do you attach the lights?
I think it is possible, you must use a voltage divider with two resistors between 3v3 and gnd, the midpoint will be the Vout (adc2 input), and use a third resistor that you will put in series with the brake contact, all connected in parallel to the resistance which is rated 3v3. Calculate R1 and R2 to have 0.80 V at Vout and R3 to have 2.66 V at Vout when the brake is pressed. The lower R3 is, the stronger the braking will be.
IOS TOO OR?
Hello sir, only Android system is supported for now.
We have not tested on the IOS VESC APP, and we are not sure whether Bluetooth can communicate with IOS normally.
@@FlipskyTech i have the Vesc Tool for My IPhone ,and this dont work ?
@@FlipskyTech can i Write u and Email ? I dont get My Flipsky 75100 Not to work
@@No-te9tr Sure sir, you can send Email to our after-sale mailbox: flipsky-service@outlook.com
I tried using this controller but no throttle will work on it any help?
Pls check whether the throttle is connected correctly. The throttle is connected to the 3.3V&5V, GND, and ADC1 interfaces of the ESC. If it still can't work pls send the video of the problem via email.Thanks
My motor temp is artificially high at 102C and throwing fault at idle. How to address this?
Hi Friend. Have you turned off the phase filter for this esc to limit the start current? Please also check your battery voltage and esc current to not over your motor continuous power. If over the continuous power of your motor, it will have the overheat problem.
@@FlipskyTech hi. Ive made sure voltage is below threshold and continuous power as well. But I will check phase filter.
@@DescartesRenegade Thank you for your support. If any problem, you can also send the details to our service team fs_service@flipsky.net.Thanks.
Is a shame that quality isn't that great I have 75100 V2 and Bluetooth port and halls board dead.
Sorry for any inconvenience caused. we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com
Why doesn’t flipsky actually give examples of how to wire an electric scooter for example? This video is useless as no one can see what wires you’re connections to what. So what’s the point of this video it doesn’t help anyone? How do I know where to connect the throttle, hoe do I know where to connect the electric breaks. Why not write this info in the wiring diagram. You guys have yet to respond to my emails asking the same questions after months. Why sell products like this and gatekeeper the info and not help your customers????
Sir, I am sorry to cause you trouble.
Since I don't know which ESC product you are using, but for our ESC,
The throttle handle is connected to the ADC1, GND, 3.3V port on the ESC
Connect the brake to the ADC2, GND, 3.3V port on the ESC
Please refer to the wiring diagram in this blog: flipsky.net/blogs/vesc-tool/how-to-the-throttle-brake-tft-screen-wiring-with-fsesc-75100
I am sorry that the staff did not reply to your email message in time. You can tell me your email address, and I will let the relevant staff check your email.
Sorry for the inconvenience.
sorry but i deeply dislike these videos with dumb music instead of explanations. it also doesn't say if the front and rear/brake light still works
Lol
Hi, I am building an ebike. Can I contact you through email?
Yes, sir. Welcome to contact our email: flipskytech@outlook.com / flipsky-service@outlook.com
We look forward to hearing from you.