Having declared my dissatisfaction with this sharpener last night th-cam.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
📌 ► My Best DIAMOND SHARPENING STONE with Aliexpress (4-th year in operation) + Bar with leather / Pasta Goi / Polishing stone "Ruby" ● alii.pub/6jh6ji ● alii.pub/6jfugd
No, none of the Sharpening systems out there do this. Best you can do is measure the angle of the spine, or flat part of the knife and move it in the clamps until it's close to the same angle either side. My runix pro I measure and setup stops on my jigg for the rod holder that I use when flipping from left to right. there is usually a 5° difference left to right. Even 2° difference results in a massive re profile of the edge.... people just dismiss this but...
@@john0270погрешность есть почти у любого прибора при затачивании,даже 1 градус но есть,для этого ко всему этому набору желательно иметь полноразмерный мягкий камень,он доведёт лезвие ножа с помощью ваших рук до идеала!💯👍
In the video when he places the level on the bar you'll see it's at like 17 degrees then he rotates it and places the level again and the level ready almost 20 so no you'll need to use the level every time if you want both sides to be equal he did not 1 side was 17 the other side a 20 so in the end his blade isn't centered but also will cause issues with burr's meaning he won't get a perfectly sharp knife
Hello friend, good evening from Spain. Do you have a video of the assembly of the toohr sharpener? I would like to know how to assemble it. Thank you very much.
бухать не надо, а смотреть видео нужно на трезвую голову , на станине он выставил угломер в ноль, после чего переставил на брусок где показания были 14° , после этого он довёл их до 17,5° это получается с одной стороны лезвия, значит общий угол заточки ножа будет 35°
Still no way to zero the angles from left or right using the knife/spine as the gage. Sure you might get a 34° total angle, but you very likely could have 13 on one side and 21 on the other
HOW could the angle possibly be different when the knife spins around its physical centerline..? 🤣 You know a trick no one else on the planet knows..? How to center something yet make it asymmetrical?
I have typed in the address you gave and on luck finding this knie fixtue. Would you please help me, I would like to buy one like this. Jim Payne, Charlotte, NC. rsvp
Please give me the exact emails address so I can go right to this fixture. I have don’t over two hours on their website trying to find this with no luck. I have spent two days on that website and I beging to think they do not sell this any more. Please, let me know something !!!!
Провёл маркером, начал водить по лезвию, а маркер справа даже не снимает брусок... Профи заточник😂😂😂 Был такой... Вовка из Тридевятого Царства И тааак сойдёт 🤣🤣🤣
A really decently good technical advanced gig...i would have had a good lot of customers but my Diy projects craftsman projects are of immigration styles.... happy new year wishes 2023
💖 ► XINZUO 8.5'' Inch Chef Knife High Carbon Din 1.4116 Slicing Stainless Steel German Kitchen KnivesMeat Tools with Ebony Handle ● s.click.aliexpress.com/e/_Dm0oI9T 💛 ► Kitchen Knife XINZUO: ● amzn.to/3iDCTdh
@@user-blackmoth да не, время свободное то у меня есть на жизнь на дела домашние на отдых и тд. А вот лишнего для такой лабуды нет. Даже если и найдется часок другой, то точно не для этой по*бени. Ну судя по вашему ответу, вы как раз этим и занимаетесь. Д*очите дальше
The video is 17 minutes long, which means it probably took about 1h to sharpen the knife. Last time it took me over an hour to razor sharp my knife. My wife took less than 10s to screw it all up by using the rough end of a sponge to "clean the knife".
All it does is hold it at the angles an experienced tradesman holds at instinctively. A joiner I knew could put a razor's edge on anything. Not overdoing the final deburring is the secret he reckoned.. he had been sharpening tools for 50 years .
🟦…IMAO You've been way more aggressive with that blade than need be,..you've Way overworked it!... You keep creating a burr and then orienting that burr & then creating another Burr!.. Your strokes should always sweep AWAY from the Spine at some angle, Not TOWARD it!
I’ll tell you this ……we’re not all willing to give you the info on the site that looks like a scam bro Figure on selling it on Amazon or eBay and I’d be interested
It’s not AI, but its just promotional advertising for these products. The replies are probably automated with a simple TH-cam api script. The video itself is just an AD and should be taken with a grain of salt.
The device is interesting. I like the overall design and engineering. However, being of Chinese manufacture it is not something that I would purchase. Instead, I can make this in my shop with scrap pieces of metal in less than a day. I do have to agree with some of the other commenters that you did stretch this out a bit longer than necessary. We all go the idea of what you were doing so shorter sequences would have worked better. Another thing that you may wish to consider is either adding a vocal track or some music. The constant hissing was really quite annoying. Even if you had just had a radio playing in the background it would have been better. Just some ideas for you to consider. Thank you for showing us this tool and how it works.
The best thing there's no music... That's excellent... 🎉
Thank you very much for your support and feedback. Peace, goodness and love.
Having declared my dissatisfaction with this sharpener last night th-cam.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
I've done it before. Thank you for your support.
Ferramente excepcional para amolar facas em geral, seguro e prático.
Parabéns ao desenvolvedor
Thank you very much for your support and feedback. Peace, goodness and love.
Would help to understand what grid you using etc
Здараствуйте. Не раскажите как доработали держатель для алмазного бруска? Купил такоже станок и алмазные камни, а они по длинне не подходят.
Добро видео. Отлична работа.
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
There no info on the sharpening stones at all - if they are diamond, ceramic, other...
📌 ► My Best DIAMOND SHARPENING STONE with Aliexpress (4-th year in operation)
+ Bar with leather / Pasta Goi / Polishing stone "Ruby"
● alii.pub/6jh6ji
● alii.pub/6jfugd
Info is this the bullshit, diamond for tool, ceramic for knife.
Hello my friend. Planning to buy this sharpener. Does it have the same angle when you flip the knife clamped?
Hello my friend. Yes, everything was quite accurate with my copy and there were no problems.
No, none of the Sharpening systems out there do this. Best you can do is measure the angle of the spine, or flat part of the knife and move it in the clamps until it's close to the same angle either side. My runix pro I measure and setup stops on my jigg for the rod holder that I use when flipping from left to right. there is usually a 5° difference left to right. Even 2° difference results in a massive re profile of the edge.... people just dismiss this but...
What a stupid question. As long as the axis for rotation is in line with the knife it WILL have the same angle. This is simple geometry.
@@john0270погрешность есть почти у любого прибора при затачивании,даже 1 градус но есть,для этого ко всему этому набору желательно иметь полноразмерный мягкий камень,он доведёт лезвие ножа с помощью ваших рук до идеала!💯👍
In the video when he places the level on the bar you'll see it's at like 17 degrees then he rotates it and places the level again and the level ready almost 20 so no you'll need to use the level every time if you want both sides to be equal he did not 1 side was 17 the other side a 20 so in the end his blade isn't centered but also will cause issues with burr's meaning he won't get a perfectly sharp knife
Hello friend, good evening from Spain. Do you have a video of the assembly of the toohr sharpener? I would like to know how to assemble it. Thank you very much.
Busca el canal de Valera Perinski, el imprime uno en 3d y lo arma paso a paso
It is really substantial to show the usage for 17 minutes to understand how it works. 😂😂😂
Thank you very much for your support and feedback. Peace, goodness and love.
Art ... I see you're using the WilAili Diamond Plateс; Do you recall which grits you used..?
Спасиба Болшои друг ... And great work (as usual).
400/800/1500/3000 Thank you very much for your support and feedback. Peace, goodness and love.
14° на станине и 17.5° на бруске, это какой в итоге угол заточки получится? 63°
По 15 градусов в сторону, или 30 градусов общий угол заточки.
бухать не надо,
а смотреть видео
нужно на трезвую голову ,
на станине он
выставил угломер
в ноль, после чего
переставил на брусок где показания были
14° , после этого
он довёл их до 17,5°
это получается
с одной стороны
лезвия, значит
общий угол заточки
ножа будет 35°
@@dralevseku2546 ешьте сами с волосами
Какой градус конкретно нужен?! что то все под разным углом точат 20,15, здесь 17,5
Под каждую ситуацию и необходимость я выставляю угол заточки
Still no way to zero the angles from left or right using the knife/spine as the gage. Sure you might get a 34° total angle, but you very likely could have 13 on one side and 21 on the other
If there is such a possibility, then everything needs to be checked and adjusted.
HOW could the angle possibly be different when the knife spins around its physical centerline..? 🤣
You know a trick no one else on the planet knows..? How to center something yet make it asymmetrical?
How rigid is it?
What was the angle adjustment 15:53?
The angle doesn't really matter ... if you're not reprofiling the knife, you're matching the angle that exists.
Usually, during the polishing stage, I adjust the angle visually.
ничё не понял-а где "ссылка" на покупку этой точилки ?
● alii.pub/6uenif
● alii.pub/6uenjl
● alii.pub/6uenjs
● alii.pub/6uenkd
● alii.pub/6uenl5
Where can I buy this from South Africa
Plenty on aliexpress.
💖 ► toohr KNIFE SHARPENER with Aliexpress:
● s.click.aliexpress.com/e/_DcQ25PX
● s.click.aliexpress.com/e/_Dl1zXfB
● s.click.aliexpress.com/e/_DeeEjWz
● s.click.aliexpress.com/e/_DFABsvJ
● s.click.aliexpress.com/e/_DEhFkb7
🔔 AMAZON
💛 ► TooHR - Knife Sharpening System
● amzn.to/48ndDzl
● amzn.to/3SHouP3
If you would put the tape an the clamps, you could keep it there and won't scratch knives - but it would look bad.
Thank you very much for your support and feedback. Peace, goodness and love.
I have typed in the address you gave and on luck finding this knie fixtue. Would you please help me, I would like to buy one like this. Jim Payne, Charlotte, NC. rsvp
Please give me the exact emails address so I can go right to this fixture. I have don’t over two hours on their website trying to find this with no luck. I have spent two days on that website and I beging to think they do not sell this any more. Please, let me know something !!!!
Search " professional knife sharpener " . There is a sharpener that is like this minus the lateral adjustment .
Wht is the best knife sharperner system? Can u suggest?
Here everything will depend on your requirements and financial capabilities.
Why can't I find this Knife Sharpener to buy???, is it listed here???
💖 ► №3 toohr #3 KNIFE SHARPENER 2022 with Aliexpress:
● s.click.aliexpress.com/e/_DE0n57f
● s.click.aliexpress.com/e/_DdPR5JJ
● s.click.aliexpress.com/e/_DDFiAoN
● s.click.aliexpress.com/e/_DDZQ1nf
Too much for a chinese made product.
hello, can you mount a classic japanese whetstone on it ?
No
Genius
Thank you very much for your support and feedback. Peace, goodness and love.
Провёл маркером, начал водить по лезвию, а маркер справа даже не снимает брусок... Профи заточник😂😂😂 Был такой... Вовка из Тридевятого Царства И тааак сойдёт 🤣🤣🤣
Не понял в чем суть проблемы
На бумагу с торца проверяет ...😊 Мусатом продёрни и бумагу будет пороть.
прямой нож любой заточит, а как закругленные?
Convex Adapter for Knife Sharpener with swivel mechanism KosiM + Diamond sharpening stones PDTools - th-cam.com/video/OYjDB3PLf4E/w-d-xo.html
Одна из лучших китайских точилок,по цене и качеству.Спасибо за обзор.
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
Sàm
A really decently good technical advanced gig...i would have had a good lot of customers but my Diy projects craftsman projects are of immigration styles.... happy new year wishes 2023
Thanks for the support my friend. Peace, goodness and love.
swietne urzadzenie, ale musiałbym urlop wziąć by naostrzyć wszystkie noże....
Dziękuję bardzo za wsparcie i opinie. Pokój, dobroć i miłość.
Ficou boa! Pra cortar papel
Muito obrigado pelo seu apoio e feedback. Paz, bondade e amor.
Como fazer para comprar este produto. Aviador de faca.
💖 ► XINZUO 8.5'' Inch Chef Knife High Carbon Din 1.4116 Slicing Stainless Steel German Kitchen KnivesMeat Tools with Ebony Handle
● s.click.aliexpress.com/e/_Dm0oI9T
💛 ► Kitchen Knife XINZUO:
● amzn.to/3iDCTdh
Этож сколько у людей времени свободного заниматься такой суходрочкой? У меня со сменным графиком на заводе стока нет
Это ваши проблемы, чего у вас нет
@@user-blackmoth да не, время свободное то у меня есть на жизнь на дела домашние на отдых и тд. А вот лишнего для такой лабуды нет. Даже если и найдется часок другой, то точно не для этой по*бени. Ну судя по вашему ответу, вы как раз этим и занимаетесь. Д*очите дальше
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
I wish I have this tool and the stones....
All links to tools are in the description below this video
COMO.CONPRAR.E.OPRESSO
Parabéns
Parabéns
ЖАЛЬ ЧТО ТАКОЙ КОРОТКИЙ РОЛИК ЗАПИСАЛ. Я НЕ УСПЕЛ ПОНЯТЬ ПРИНЦИП ДЕЙСТВИЙ 😄😉
) Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
The type of guy who tries to fill his whole work day with one simple job
Thank you very much for your support and feedback. Peace, goodness and love.
Ну и чем принципиально она лучше ижевского Профиля?
Не пользовался точилкой Профіль.
@@ArtTemaMix Прекрасно сработанное устройство. Пользуюсь много лет.
Brother i want to buy
All tools are linked in the video description.
Cant find it on AliExpress :/
I leave all links to products in the description under the video.
The links are not correct. Maybe in some countries not avaible?
The video is 17 minutes long, which means it probably took about 1h to sharpen the knife. Last time it took me over an hour to razor sharp my knife. My wife took less than 10s to screw it all up by using the rough end of a sponge to "clean the knife".
Fast sharpening th-cam.com/video/sHD6p2dgs5k/w-d-xo.html. Thank you very much for your support and feedback. Peace, goodness and love.
Süper
Desteğiniz ve geri bildiriminiz için çok teşekkür ederiz. Barış, iyilik ve sevgi.
Lijepa stvar.Koja je cijena?👏🇧🇦☕🍰
● alii.pub/6atxjg US $122.65
All it does is hold it at the angles an experienced tradesman holds at instinctively. A joiner I knew could put a razor's edge on anything. Not overdoing the final deburring is the secret he reckoned.. he had been sharpening tools for 50 years .
Thank you very much for your support and feedback. Peace, goodness and love.
🟦…IMAO You've been way more aggressive with that blade than need be,..you've Way overworked it!... You keep creating a burr and then orienting that burr & then creating another Burr!.. Your strokes should always sweep AWAY from the Spine at some angle, Not TOWARD it!
Thank you very much for your support and feedback. Peace, goodness and love.
That’s how you turn an 8” Chef’s knife into a pairing knife. 😮😂
Socket headed screws in 2023. replace those with knobs. set up will be much faster.
Thanks for your advice.
Si ma manca un qualcosa che regola il fine corsa, al fine di impedire il taglio delle dita.
Thank you very much for your support and feedback. Peace, goodness and love.
Aparentemente perigoso.....uma distraçao e la se vai um dedo ou varios.....percebam que a mao dele chega perto da lamina.....
Muito obrigado pelo seu apoio e feedback. Paz, bondade e amor.
I’ll tell you this ……we’re not all willing to give you the info on the site that looks like a scam bro
Figure on selling it on Amazon or eBay and I’d be interested
🔔 AMAZON
💛 ► TooHR - Knife Sharpening System
● amzn.to/48ndDzl
● amzn.to/3SHouP3
Give more information...
Thank you very much for your support and feedback. Peace, goodness and love.
14 minutes with the video speed up? So like 45 minutes or an hour. It may put a very good edge on it but way to labor intensive and time consuming.
Thank you very much for your support and feedback. Peace, goodness and love.
17 минут острый нож делали острее 😅😂😅😂😂😂
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
These channels mske me think most are AI. Sm i alone?
Riiight? Maybe the knife doesn't even exist. Probably all just imaginary. Like the spoon, eh?
Thank you very much for your support and feedback. Peace, goodness and love.
It’s not AI, but its just promotional advertising for these products. The replies are probably automated with a simple TH-cam api script. The video itself is just an AD and should be taken with a grain of salt.
200 Dolars 😮
100 Dolars 💖 ► Sytools Beast - BEST Knife Sharpening System
● s.click.aliexpress.com/e/_DCwmbZ3
Алмазные бруски, очень хорошо чистятся с помощью преобразователем ржавчины, практически до заводской чистоты
Большое спасибо за поддержку и ваш совет. Мира, добра и любви.
преобразователь ржавчины содержит ортофосфорную кислоту так что им не побрыгзаешь, разъест всё кругом. Если есть лишние брюки и рубаша пользуйтесь.
@@Kolin4556 Нечего не разъедает, не выдумывайте
Aka most complicated way to sharpen a knife, when you can simply pick up a natural stone for free
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
The moves are wrong!😢
Try one way with same pressure😏
Imagine you have a file instead of fine sharpener stone🤔what surface will you get?
Thank you very much for your support and feedback. Peace, goodness and love.
Может просто наточить нож и порезать хлеб?
Большое спасибо за поддержку.
Ahhhhh the ole paper cutting trick to “prove” what??? That you can cut paper? That’s great if you need a paper cutter.
雖是好用，設計複雜成本昂貴，不會普及。
非常感謝您的支持與回饋。 和平、善良和愛。
Чтобы она стала "лучшей" , ей сначала моторчик нужно приделать..
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
Дешевле новый нож купить
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
Your fingers are far to dangerously close to that blade....don't u think?
You need to be very careful when working with a sharp knife.
Смешно😂😂😂😂
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
TS Prof is waaay better.
Thank you very much for your support and feedback. Peace, goodness and love.
Are you a surgeon
why do you need scalpel sharp kitchen knives does it really warrant this much work to cut a carrot??
GET A LIFE
Thank you very much for your support and feedback. Peace, goodness and love.
Lots of clicking sounds. Lots of sped up video. Nothing informative.
Now sharpen a scandi grind and you'll see why this system is shit
Thank you very much for your support and feedback. Peace, goodness and love.
Did we have to see the whole bloody thing? We got in the first minute and a half.
Wot waste of money you need one simple stone 👎👎👎👎👎👎👎👎
Thank you very much for your support and feedback. Peace, goodness and love.
效率太低
非常感谢您的支持和反馈。 和平、仁慈和爱。
fuck that
Thank you very much for your support and feedback. Peace, goodness and love.
Oh for goodness sake! How about actually learning a skill, go play with your computer afterwards.
Thank you very much for your support and feedback. Peace, goodness and love.
The device is interesting. I like the overall design and engineering. However, being of Chinese manufacture it is not something that I would purchase. Instead, I can make this in my shop with scrap pieces of metal in less than a day.
I do have to agree with some of the other commenters that you did stretch this out a bit longer than necessary. We all go the idea of what you were doing so shorter sequences would have worked better.
Another thing that you may wish to consider is either adding a vocal track or some music. The constant hissing was really quite annoying. Even if you had just had a radio playing in the background it would have been better.
Just some ideas for you to consider.
Thank you for showing us this tool and how it works.
Thank you very much for your support and feedback. Peace, goodness and love.
❤❤❤❤
Thank you very much for your support and your feedback. Peace, kindness and love.
Народ. Сколько стоит эта штука. Куплю, буду ножи точить на склоне лет. Ответьте пожалуста.
Knife sharpening system Aliexpress ➤ alii.pub/6sz3fj
...видео ниочем...хотя нет. Реклама
Thank you very much for your support and feedback. Peace, goodness and love.