RC MadLabs Shims for Arrma 3s/4s Suspension Slop Fix.

Hi Gang!
Come with me as I take a trip to my local hobby shop to get some parts, and purchase a New Arrma Typhon 3s.
i do and shim and spacer install on my Arrma Vorteks A-Arms and do a DIY wheel O-Rings on the new Typhon 3s to lessen wheel wobble.
Links to resources used:
Steering slop videos:
A-Arm and Steering slop Fix:
• Arrma Typhon V3 A-Arm/...
Wheel Wobble Fix:
• Arrma Typhon v3 Hex is...
RC MadLabz parts and videos:
/ @rcmadlabz2492
The Hobbitat Hawaii:
www.yelp.com/b...
Thank you everyone for your Continued Support and for joining me on Instagram as my Followers have Grown!!
Stay Tuned for more videos!!
Contribute to help build my Channel:
Paypal to [e-mail]
Instagram: @watsnu2day
Email: [e-mail]

[@rcmadlabz2492]

Good Job!! Yes, every model has a little different clearance, due to wear.
We have the Hot Racing red aluminum pivot ball kit installed on some of our upper links…depending on the model, it can be a little difficult to figure out which shims to use.
*Regarding the stock Arrma Typhon 3s 17mm hub adapters and driveshaft axle stubs…. We have eliminated this wheel slop by replacing the plastic hubs/steering knuckles with aluminum, and by converting to 17mm differently. The overall diameter of the stock axle shafts is where the problem “begins”.(hex adapters to shaft clearance is too great).

[@sparks701]

Big spyderco fan. Like the knife!

[@watsnu2day]

Sorry about the choppy Time Lapse at 12:45. My first time using Time Lapse on the DJI Osmo Action.

[@phillybrc]

hey bro, are your trenchers belted? how do you like them? Sorry if I ve already asked you this

[@watsnu2day]

Yes they are belted trenchers

[@FishTacos357]

what shocks did you go with? i’m struggling to find replacement shocks for my vorteks

[@watsnu2day]

Big bore shocks from ebay

[@undertow4629]

​@@watsnu2daykind of the same question. Do they make it higher or same and is it just any big bore off eBay? you got a link on what you went with? Thanks

[@brewcrewpaddling9204]

Howzit Abas, geat channel! I just sent you an email, so hope to hear back from you, oh and no worries I'll definitely be able to "help support your channel through paypal" for your help...Aloha.