Mazda 6 head lamp bulb replacement (low beam)
ฝัง
- เผยแพร่เมื่อ 6 พ.ย. 2018
- like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/Momoboss5
thank you for your love and support - บันเทิง
Thank you! I’m a 26 year old girl and my dad wasn’t able to help me I watched this video and did it all myself. The instructions were awesome!
Pro Tip: open your hood when you do this. It lets the light in and makes seeing what your doing way easier
You just saved me a lot of money that I don't have! I'm a 57 year old woman and like to do all I can myself. Thank you so much! Good, straight forward video! Keep them coming!
I changed my headlight on the passenger side and I was able to do it the same way only because my hand is small enough to fit without removing anything else! Thank you so much!
You’re a hero. I was lookin under the hood like how the fuck am i supposed to get to the back of this😑
Bro..... you had me at turning the wheel and removing the splash Shield. I have done this the hard way so many years trying to finagle my hand from the top under the hood 😅😅😅😅😂😂.
Thank you for this video, replaced the bulb in a 2016 in less than 10 minutes.
I had no idea what i was doing but i just did exactly what this guy said and boom! I have replaced both low beam bulbs in 20 min. Thanks, awsome. I have mazda6 2002 cheers
Thanks! I was able to reach my right side bulb from above, but couldn't get it unplugged without being able to see in and reach in at the same time. Once I saw where to squeeze the tab to unplug it, I was able to change the bulb in 2 minutes.
This was great!! Nice short and exact video and instructions !Got it all done and installed some brighter ones I have been wanting for awhile!! Thank you!!
Thanks bro. You save me a hundred bucks🎉
Those clips were a nightmare to put back 😵
I love you so much this is by far the best instructional tutorial video that just saved me $200 God bless you sir God bless you. 2016 Mazda 6
Worked like a charm for 2017 Mazda 6 Touring!
perfect description to replace head light bulb for 2015 Mazda 6-yes you have to lie on your back but it took me less than 10 minutes to do both--helps to have a friend hold the plastic back while you remove and insert the bulb. I was worried about popping the plastic clips/rivets--key is pop the button on the first--there are ares around it to insert a flat head screw driver to just simply pop it up. Then pull it out. Once you do one the others are easy.
Thank you! Fantastic video, saved me a headache trying to figure out how to replace it!
This was so easy! I can’t believe everyone in town told me I had to dissemble the entire head light to change the bulb.. I came across this tutorial , I followed each step and BOMB!! Both head lights replaced in 25 mins . I don’t need NO MAN 💁🏽♀️
Needed a man to show you.
@@tomdavid1309 TOP G
Thank You, changing the bulb on my daughter's car this afternoon. Great tutorial!!!
Thank you so much for this video! I'm gonna change mine today got H11 bulbs. Mine 2013 Mazda 6
He changed the low-beams. You want to change the high-beams, H11?
Great video, thanks!
Very helpful! Thank you!
Great tip! I was all set to try taking the headlights out or something. Managed to do this with a flashlight in the morning in maybe 15 minutes and upgraded to LED while I was at it
When you upgraded to led, does it flicker and give any warnings on the dash?
Got to give props. Worked perfect
Great video took less than 15 mins!! Thank you
Thanks heaps for this vid,so much easier than trying to figure it out yourself and doing it the hard way lol.
Great video. Very well demonstrated. Thank you.
Brilliant.thanks.
This video saved me a lot of time. Thanks for sharing it!
Thank you!!!
Thank you
Very helpful! Thank you for the instructional video!
I got 2012 it’s a h7 but same process obviously.. thanks for this vid, saved me a couple bucks!
I actually opened the air intake and moved it up. Then opened the fuse box. Removed the one bolt and one nut. Both are 10mm. Popped it back and up. It gave me enough room to do this on the driver side. The passenger side was tight, but didn't have to remove anything at all. Was done in 10 minutes total. Hope this helps those with fairly normal sized hands. If you have large hands, then take the longer route described in this video.
The 2013 Mazda 6 is completely different from this. More clips to pop off, and it is much harder to pry open. But the hard part on the 2013's is there is an entire other case containing the bulb. You don't just see it when you pry the black part back.
Perfect, thanks
Thanks! This was super helpful!
Great !! Thanks
Thanks bro. Good video!
New sub! Thanks for this video
AMAZING INSTRUCTIONS! Dude, thank you so much! Your 5-minute video turned my I dont want to deal with this BS task, into a 17min Holy Sh*t I did it and only spend money on the bulbs task!😊 thank you. I will def subscribe thumbs up and follow
Your channel, Mr Goodwrench, sir!😊🚗🔧😊
Nice, I think I'll try this and save the $110 canadian dollars my mazda dealdr wants.
Tnx
I have a 2017 Mazda6 Thank you
I have a 2017 Mazda 6 as well. Did it work for you?
Thanks
Worked for 2016 M6 sport. Thank you!
You dont have to do any of this. You can get to the bulb from the hood if you remove the top of the filter cover (very easy to do). . If you have good hands you can change them both. I did mine on my 2014 mazda6 without removing anything by the wheels.
Is this the same for a 2017 mazda 6 dual filament high and low beam with drl on the low beam.
Very useful. Was surprised I couldn't access this from the hood on my 2014. This was much less invasive than some other suggestions. Hardest part was getting those clips out without breaking anything. Once in it was simple. Thanks!
Could you please, PLEASE do a video on replacing headlight bulb on a 2005 Mazda 6 S
You do not have to go through the fender well to change lightbulbs on a Mazda six. You can just reach under the hood to the back of the headlamp Assembly and unscrew it. Done it plenty of times. Do not tear your car apart to do it this way. I’m taking about a 2016 mod
You need to in the 03-07's at least. It was a common problem for about a decade.
Thank for the video. Hate my wifes Mazda. Any repairs start with step 1, dissemble the entire front end
Is it the same on the other side? I saw one video with replacing bulb from the top, there is much more space. (I replaced left bulb today, but it's not working - it could be a fuse or wires, I had a quick look on wires, they seemed fine, will check a fuse in a engine fuse box [no 23 is for a left bulb, 24 for a right one]).
Is this same for 2005?
same for high beam?
My 2015 Mazda6 Grand Touring looks very different when I follow this. I wish I could upload a picture because I bought some LED's I'd like to put in, but I have this aluminum-looking block with the wire plugged into it instead of a bulb to twist and remove.
Your car have led or hid from factory thought aluminum blocks are balas
Why the fuck does no one put the year?
Thank you very much for the super video!
They expect you take the entire bumper off to change a light bulb? I guess I'll go this route 🤦♂️
2015 mazda 6 here. You don’t have to remove anything to change the high or low beams. This video is good to show you how the clicks work and which way to spin the lights for install/removal.
How are you doin it then
@@willienorstrom2616 You can do it from the hood but it's a bit harder to see what you're doing
@@TheLockAndLoll no i cant
@@willienorstrom2616 I'm sorry you can't. I meant to say it's possible to do it from the hood/engine bay for a 2015 Mazda 6
@@TheLockAndLoll i have 2016 modell from The swedish market
Those clips went in WAY earlier then mine🤣😭
Good video however it was significantly easier to just open the hood and go from the top
Would this work on 2009 Mazda 6?
I have a 2009 Mazda 6 GH (RHD)
What year?
I feel dumb now I just tried taking the whole the thing apart 😢
Having trouble getting the passenger side bulb to sit flush anybody else. The beam of light then at night does not sit right then.
Hi what kind of tool I need to remove the clips ? how is that called?
Milan Gschiel it’s called trim removal tool. Get it here: Tresalto Auto Trim Removal Tool Kit, Set of 5 Pcs www.amazon.com/dp/B01L8GHB7O/ref=cm_sw_r_cp_api_i_k.jBDbFVWCJYB
Flathead should work right.?
So this is low beam? I was looking at my mazda6 and it seems like the bulb he was replacing was the high beam bulb
It's ridiculous that car manufacturers can't come up with an easier way to change the bulbs. Take half the car apart?
What about righet side
Same procedure
Nice video. Can you please help me to adjust the high of the headlight of that car? I have auto regulation but the "base" is too low and I need to increase that. Thanks
Is this similar to a 2009 model mazda 6?
Yes aka a pain in the ass
Not the same for a 2009. Much harder!
This is incorrect. The 2011 Mazda 6 has a plastic cover which you must unscrew until you can see the backside of the bulb. Dullah doesn't show it.
replace the whole thing like this th-cam.com/video/ZOVDIaCh9Rw/w-d-xo.html
Thank you