Did you have to trim code the injectors and what scan tool did you use any recomendations i have a 17 model 2500 and i dont wanna ever have to take it to dodge garage
I've seen all your videos so sorry if you already answered this. Which hood is that? Reflexxction 2" cowl induction? What did you pay to have it painted and did you do your fenders again? Never did get an answer on the cost for the Laramie bumper swap. How much? I have an 09. Blacked out. 467 swap. 150hp nozzles. G56 daily driver. Also repo cars on the side with it. Hidden lift and tow z series wheel lift on the back. Just bought a camera. I'll get some videos up soon
I don't have a exact price yet, its not done and the hood is a steel cowl hood you can get from jegs or summit or other places, I don't have a prive to paint just a hood either, it can vary from area to area or who your using
Nice video Greg. I was curious if you could do a video on purchasing a used 3rd Gen '06-'09 5.9/6.7 Cummins. What you think is a good price vs. mileage on truck, specifics you like to look for, etc.? I'm about to start looking for a truck in the years above and I'm very familiar with Cummins, but would love to hear your opinions. I really want an '08-'09 for the 68RFE Thanks man and keep up the good work -Mike
Are these stock injectors? what's the biggest tips you can run on a stock cp3 and stock turbo or like a stage 1 turbo? I know with more fuel you need a turbo to Be able to put out more boost. my truck is an 06 just intake, exhaust, no tuner. daily driver and tow +12k lbs every week. Just want something to help tow better seems super sluggish recently.
I wouldn't even be looking into turbos or injectors unless you have the supporting mods, intake, exhuast, tuner and then a lift pump. Some tuning will for sure wake it up.
hey greg you said the injectors you could tell where getting a lil weak, you should do a video on commons rail injector lifespan and tips how to avoid fuel system failure and engine failure due to bad injectors thanks
another great video. Question: I am converting a 03 dually to a single wheel just like your tow rig truck will a 03 2500 rear end mount up in my 03 ( leaf spring mounts in same place etc? haven't found many people who have done this so I figured I would ask. any advise would help
I've done it 2 ways, but yes a 2500 axle will bolt right in, you can also run a regular wheel on the 3500 axle it will just stick out a little further than the front seeing the 3500 is a tad wider
Just installed my 3.5" pusher intake Greg. When I convert to 2nd gen manifold will I have to make some custom elbow to keep that 3.5" tubing on the hot side?
What are your thought on swapping a 5.9l out for a 6.7l in a 06. Do you think it's worth the money I know people are getting into the 6.4 but that's a lot of cash.
SuperMotoSean 419 I know a 6.4 is a de-stroked 6.7 and there is a bit of money there what I am asking is. Would it be worth it to pick up and 6.7 and put it in my 06 using my ecm and as much that I can swap over from the 5.9
Man I really love your videos. But I am a duramax owner it's the lml 2011. I was going to get the 5.9 dodge but the trans was bad 😢. I still love my dmax. Any words of wisdom? What should I do to it first?
I miss this raw POV driving content
Did you have to trim code the injectors and what scan tool did you use any recomendations i have a 17 model 2500 and i dont wanna ever have to take it to dodge garage
As always awesome video. Man, there's nothing like the sound of a cummins spooling through the gears.
Todd Jordan zits that transmission about to drop bub
I saw your competition truck in the diesel magazines
Love the videos
I've seen all your videos so sorry if you already answered this. Which hood is that? Reflexxction 2" cowl induction? What did you pay to have it painted and did you do your fenders again? Never did get an answer on the cost for the Laramie bumper swap. How much?
I have an 09. Blacked out. 467 swap. 150hp nozzles. G56 daily driver. Also repo cars on the side with it. Hidden lift and tow z series wheel lift on the back. Just bought a camera. I'll get some videos up soon
I don't have a exact price yet, its not done and the hood is a steel cowl hood you can get from jegs or summit or other places, I don't have a prive to paint just a hood either, it can vary from area to area or who your using
GREG_ALBERALLA
Appreciate the response
Nice video Greg. I was curious if you could do a video on purchasing a used 3rd Gen '06-'09 5.9/6.7 Cummins. What you think is a good price vs. mileage on truck, specifics you like to look for, etc.? I'm about to start looking for a truck in the years above and I'm very familiar with Cummins, but would love to hear your opinions. I really want an '08-'09 for the 68RFE
Thanks man and keep up the good work
-Mike
Are these stock injectors? what's the biggest tips you can run on a stock cp3 and stock turbo or like a stage 1 turbo? I know with more fuel you need a turbo to Be able to put out more boost. my truck is an 06 just intake, exhaust, no tuner. daily driver and tow +12k lbs every week. Just want something to help tow better seems super sluggish recently.
I wouldn't even be looking into turbos or injectors unless you have the supporting mods, intake, exhuast, tuner and then a lift pump. Some tuning will for sure wake it up.
GREG_ALBERALLA the only things I need are lift pump and tuner. got the intake exhaust. getting the other 2 this week
hey greg you said the injectors you could tell where getting a lil weak, you should do a video on commons rail injector lifespan and tips how to avoid fuel system failure and engine failure due to bad injectors thanks
Hey Gregg where or how did you get those taillights black
I'm so jealous of your truck
another great video. Question: I am converting a 03 dually to a single wheel just like your tow rig truck will a 03 2500 rear end mount up in my 03 ( leaf spring mounts in same place etc? haven't found many people who have done this so I figured I would ask. any advise would help
I've done it 2 ways, but yes a 2500 axle will bolt right in, you can also run a regular wheel on the 3500 axle it will just stick out a little further than the front seeing the 3500 is a tad wider
Thanks for the information
Do you delete your trucks? And if so, what are the benefits of it?
Thanks for the tint advice 😂😂
Just installed my 3.5" pusher intake Greg. When I convert to 2nd gen manifold will I have to make some custom elbow to keep that 3.5" tubing on the hot side?
Dodge makes it Cummins SHAKES IT!
Love the vids.
another awesome video 🤘
Great info how many miles on your 2008 and 05?
What are your thought on swapping a 5.9l out for a 6.7l in a 06. Do you think it's worth the money I know people are getting into the 6.4 but that's a lot of cash.
Seth Nielsen the 6.4 is actually a de-stroked 6.7
SuperMotoSean 419 I know a 6.4 is a de-stroked 6.7 and there is a bit of money there what I am asking is. Would it be worth it to pick up and 6.7 and put it in my 06 using my ecm and as much that I can swap over from the 5.9
I don't really see a need for it, I think a built 5.9 platform can accomplish most peoples goals very well.
Man I really love your videos. But I am a duramax owner it's the lml 2011. I was going to get the 5.9 dodge but the trans was bad 😢. I still love my dmax. Any words of wisdom? What should I do to it first?
Subscribed, love the vids and my cummins
New to the channel but loving the content!
Thanks!
GREG_ALBERALLA are you a diesel tech? you're crazy knowledgeable
Where'd you get the valve cover?
Are you a diesel mechanic? Is this what you do for a living?
what kind of intake horn is that?
Its from glacier diesel
rad!
What kinda tires are on your truck ?
How many miles are on your truck?
What size are the cp3 and injectors?
stock
I'll buy one depending on price. let me know when you figure it all out!
What size turbo back do you run?
4in downpipe to 5in the rest of the way
Your trucks are sweet, love the videos man keep it up!
how many trucks you have?
i got a 2011 lml duramax and a 1987 silverado with an ls6 swap
Nice👌
work your ass off and buy a cummins. I have a 2001 6 speed and a 2000 xj
Lmao I go hunting there on state land
Hey greg you trying to sell them old injectors?
No sorry, there for cores
GREG_ALBERALLA Alright man great vid keep em up
I'm so tired of Tai Lopez in his garage
Sick dude