Rare Dyson DC27 USA Model Vacuum Review - Tune Up Cyclone Disassembly & Demonstration
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2020
- The North American DC27 was unique to the same model sold in other countries. Here I go through giving the vacuum a tune up, taking apart the cyclone assembly, and demonstrate it.
- ภาพยนตร์และแอนิเมชัน
Thank you for posting this video……thanks to you I have given my Dyson a thorough deep clean along with a new foam pad ( gasket?). The upshot is that it seems to have a new lease of life, giving my carpets a proper vacuum. Glad I found you 😊
That’s great! Glad I could help!
Thank you for this video. I just purchased one and through your video, realized I got taken. But I’ll be able to make the necessary repairs and it should be good as new.
Sorry to hear yours didn't meet expectations, but hopefully you can save it, and put it back to use! It's a very powerful vacuum when it's working correctly.
This reminds me of the air muscle! Without the air muscle part.... why these didn’t sell longer or better I will never know
It's a shame. They discontinued them so quickly. It's an Air Muscle without all the complexity. Thanks for watching, Vac Lounge!
@@VacTech1 Not only did the DC27 Total Clean only have a 2 year production run, but it was sold as an exclusive edition model which is why it is rare and difficult to find.
The DC28 Airmuscle is not impossible to diagnose or repair, it’s just fiddly and requires really close attention, twice the effort of other models. However I still managed to restore it to the point where it looks like a brand new vacuum, sounds like a brand new vacuum and runs really well.
Hello
Thank you for sharing your knowledge it is appreciated 😊
I found a Dyson DC 27 vacuum cleaner the cord was cut off- at the base on the stem of the vacuum. Can this be replaced?
Yes, it sure can! You have to take apart the handle near the power switch, to replace the cord. You'll likely want a cord made for the vacuum, as there's little room to wire a new cord to the old one, inside the handle.
Thank you for this #1 informative tutorial.
EASY TO UNDERSTAND ABD APPLY TECHNIQUES
Do you know where to buy a brush roller for this model?
Thanks again! Great instruction video!!
Thanks for watching! I would try a local vac shop, ebay, or amazon for a DC27 Brushroll.
I just want to know how to use the small nozzle end for tight areas
I tried to get the plastic screws to turn to remove the initial plastic cover. I got the end one to move, but in trying to get the middle one to turn the plastic just turned into a mess. The screw wont budge and the slot it is now mangled and stripped. Any suggestions on how to get it out?
Those plastic locking screws were always so fragile. Either a large coin, or a very large flathead screwdriver are best to prevent damage to the plastic. You could try to squeeze the bottom plate and the housing it connects to together, near the screws, and that might help you loosen them. Otherwise large tools/coins work best for them. I hope you're able to get them turned!
Vac Tech
Do you work on carpet cleaners by chance? Bissell proheat 9701.
Roommate used mine without asking. Has very low to no suction
now. Thanks
I do, but it's hard to say what would be causing that without seeing it. If a good cleaning, and making sure everything is sealed ok (the tank lid and nozzles) don't do the trick), I would recommend taking it to a local vacuum shop to have it serviced. Good luck!
I have a d27 vacuum and there isn’t picking up and it’s new the it looks like a seal missing the air is coming through here.
my dc27 has suddenly stopped sucking up from the bade...hose works perfectly...sounds like its working...pulled it all apart...everything looks fine..🤷♀️ suggestions?
Is the brushroll spinning when you lower the handle? Could be something simple like a brushroll switch, if the brushroll belt isnt broken. Do you hear the brushroll motor turn on at all?
@@VacTech1 I just had the same issue - the brushroll stopped functioning. After watching your video, I learned that there was a separate button that controls only the brushroll, it must have always just been on by default when operating the power button. Crazy that I've been using this for a decade and never had that happen before.
@@scottshoning4909 so with this machine, whenever you press the power button, it presses the brushroll switch as well.
When I get the attachment nozzle out it doesn’t suck anything, pls let me know how to activate the suction from wand
It should switch to hose mode when it's upright automatically. Is the clear U-shaped piece closed at the bottom of the wand? It's either missing a piece, something isn't sealed right (the U-shaped clear piece), or the hose/wand is clogged. I hope this helps! Should be a simple fix.
@@VacTech1 thanks I can’t see any piece which attaches at the bottom as why it’s not sucking, I recon it’s lost, thanks for replying I appreciate it.
On eBay I’m looking at a dc17 but it says brush is loud do you think it’s ok to buy it’s going for 140$
I wouldn't pay that much for a used DC17 tbh. That could be a number of issues. Maybe something simple like a belt or brushroll, or something more complex like a brushroll motor, or the plastic brushroll housing. I hope you're able to find a nice one soon!
Vac Tech ok ima pass on this one
Vac Tech I think I’m going to look on market place
Vac Tech cause I ask the seller what the noise was and they never replied so yeah
@@EvanJS2005 Understandable. Good luck!
That’s a dc27?! The dc27 in the uk is like the dc33 with a clutch. In the uk we didn’t get uprights with separate brushbar motors.
Right. The US version cleans carpeting a lot better than any of the clutch Dyson models. Sadly they didnt sell it for long here, and they're pretty rare these days! Thanks for watching!
where couldi buy a possible USA version with a USA cord? i don't trust myself trying to replace the cords and i'd probably ruin it.
I don’t own a DC27 but I would love to acquire one. Let me know if you see one available.
Sure, Zmanifest! Btw this one is more comparable to the Workhorse in terms of carpet cleaning performance. It's a huge step up from the DC25. A good brushroll and nozzle design makes all the difference.
@@VacTech1 UPDATE: I finally got a DC27 Total Clean from EBay in good nick!
@@zmanifest congrats! I hope you like it!
@@VacTech1 I do, and Not mention value it! If I passed up, I would have absolutely regretted it.
@@VacTech1
Many thanks for all your very good information, and for this clear and helpful video about restoring a used Dyson DC27…🌟
You’re a great mentor, and I’ve learnt a lot by watching your excellent videos!
Thanks❣️
Didn't know these were made in us! thought it was only uk
They were made for the us and they are made in Malaysia
@@EvanJS2005 Oh god, Malaysia. Good thing I only have one Dyson product, Malaysia is the definition of cheap!
RettTV II they used to be made in the uk Malaysia is better than China though
RettTV II what Dyson
@@EvanJS2005 I've got a dc07 Pink. And no, Malaysia is worse than china. Their quality is worse and they treat workers worse than China.
Wait. Didn’t you already upload this?
Good eye. I had to make an editing correction, and pulled it down.
Vac Tech ah cool
You can also remove the shroud off from the cones and remove the gasket off from the bin, there's a video of how to do so and this applies to any DC27/DC28/and DC33 model. th-cam.com/video/yYOd8HYTQWY/w-d-xo.html
I know. I wish I would have done that in the video. Honestly I'm not sure why I didn't, as I've done it several times before. Thanks work watching! Thanks for watching, Panavac!
No problem! I completley agree with you though, I think this was one of their better cleaning Dysons ever and I wished they sold these for a bit longer. I even liked these better than the DC28.
@@panasonicvac4036I wish they had too. It's a much simpler design than the DC28.
@@VacTech1 Hi I’m on the Autism Spectrum, I have diagnosed and serviced a DC28 before and it wasn’t that big of a deal, it was just more complex than other models. I was able to get into the mechanisms and remove all of the gunk and fluff, and then I lubricated the mechanisms with silicone lubricant, the brushroll I am still trying to figure out how to remove the belt housing, it is fiddly, but it’s not impossible... I just didn’t want to take any chance of damaging the belt housing. So I found another way to service the brushroll, I took a pair of tweezers into those tight little areas and pulled most if not all of the fluff out of the end caps of the brushroll. Sneaky huh? Then I lubricated the Brushroll bearings with Silicone, and why I use Silicone over WD40 is because Silicone repels dirt rather than attracting it like WD40. Now my DC28 is operating much smoother than before. Maintaining and Servicing a DC28 is not impossible, it’s just more complex than other models. Hope you found this helpful and interesting. :)
I like that one but im getting a dc40
If you can afford it, the Ball Multi Floor 2 is basically a beefed up version of the DC40. It cleans much better.