@@adamal-khal58 Not really, they used the same buzz words and still didnt provide facts on real-world run times. They can claim the got X performance upgrades but gas is still cheaper to run vs the massive investment in these battery tools that may not be around in 10 years
SHOUT OUT TO RYAN FOR BEING CLEAR AND WELL SPOKEN. That new circular design seems to be better. The older version always bogs down on me after cutting a couple boards.
Was on a bridge job and the safety guy wanted everything battery operated and after the super saw no one working and the Honda generator running all day to charge batteries the next week everything went back to gas generators and cord tools
Caine meth or abuse of adderall prescription LOL but yeah i noticed this as well, get a load of what he was doing with his gloves when Stan first walked up to him lol
Those self cleaning heapa vacuums are notorious for filter mechanism failure. They have a power supply chip that automatically kicks in once the tool senses a pressure rise across the filters . We’ve had these for years in Europe.
$549 bare tool for the duplex nailer is just ludacris. Come on milwaukee seriously? Framing nailers and finish nailers will be used far more often than a duplex nailer. I don’t care what anyone says, you are not forming up enough for that price point to make sense. It needs to be around $200 which is still the standard over priced Milwaukee charge for every new tool.
Now your Talkin Dirt Monkey!!!!! Residential Remodeling Contractor from Boston. Team Milwaukee all the way!!!!I just went ALL M18 Cordless....Best thing I ever Did!!! Great content btw!!!
Stan the Milwaukee tool I found to be the best one is the sump pump say the power and heat goes out and a pipe bursts in the basement you can then quickly find the water shut off and then pump the water out and reduce the potential for mold damage cause how many people actually put there backup sump pump battery on a battery tender to maintain it
I worked in a shop with the full complete Milwaukee line up. Overall not as impressed as I thought Id be. The angle grinders are terrible. The hand tools are nice.
Milwaukee is my tool of choice I really like the wacker/ compactor I like that fact that it when the loser drops it it stops on its own I mean when the user drops it But what I did not like what I heard it works faster, compassion is a tedious and slow process so you can get serious compaction in every inch of ground you covered so if you have to go over something four times to get density this sounds like you may have to go eight times to do the same thing
Milwaukee makes the toughest, most reliable tools, and they have the largest tool platform. I owe and have used all the major brands. Going forward, I will only buy Milwaukee. I found Milwaukee batteries work way better in cold up here in Canada.
Whats the purpose for that water pump? Aren't pumped supposed to be directly connected to a power source so they can run 24/7? Please someone explain me this.
He was way more critical with the DeWalt tools but we all love battery powered stuff it's just too damn expensive. The key is to quote new tools into the jobs...sometimes it can be done..sometimes your truck needs a transmission...
I love Milwaukee tools... to me, they're the best on the market. Thanks Stan for taking us around the Milwaukee booth. Ryan needs to stop drinking the high test coffee.
All these companies love being misleading and vague with their answers. Gas bad electric good but cant provide actual real numbers. "We will get back to you" Gas is still more powerful, even with maintenance is still cheaper than the electric tools
Milwaukee popping vacuum is just following the drywall sanders vacuum.. not there technology .. they pop due to drywall dust is so fine and normally clogs any filter.
Milwaukee keeps innovating, that is for sure. I am hoping and waiting for a second generation of chainsaws for the professional user that address some of the shortcoming of the current ones.
So, he showed us how the new detents for blade depth work on the circular saw and set up the blade perfectly, then he lowered the blade to the wrong depth and cut the OSB. Man, that kid is jacked up on something.
$7000 for a battery operated wacker is simply insane. For another $500 I can buy 3 gas machines.
Unless you're in California
or work for the state in colorado now too
Gas is cheaper then these tools, you have to replace the battery every few years and they never match their claims on run time.
$7000? What a bunch of jokers. That price is asinine.
And only runs for twenty some minutes
He beat the Dewalt guys up yesterday about their batteries, recharge time etc…but really took it easy on the Milwaukee crew.
Because Milwaukee actually answered his questions.
Milwaukee was more honest about run time
He received more swag from Milwaukee………trying to keep up with Victory and sponsorships.
@@adamal-khal58 Not really, they used the same buzz words and still didnt provide facts on real-world run times. They can claim the got X performance upgrades but gas is still cheaper to run vs the massive investment in these battery tools that may not be around in 10 years
Holy jumpins!!!! buddy is on some Milwaukee Nose Candy.
LMAO FACTS
I need what ever Ryan was on for my mornings 😂
You can take the man out of the trades but you can’t take the trades out of the man!
@@TristenHernandez it’s a hell of a drug😂
He said “I’m passionate man” hahahaha i bet
Brazilian dancing dust, mexican marching powder, columbian bam bam, good ol american booger sugar!!! lol
That wasn't cola beverage energy. That's some Methmatics energy.
SHOUT OUT TO RYAN FOR BEING CLEAR AND WELL SPOKEN. That new circular design seems to be better. The older version always bogs down on me after cutting a couple boards.
Stan is always the life of the party! 👍🏻
Check that finger lock at 6:25. Dude is hopped up.
That's when I knew for sure aswell
Was on a bridge job and the safety guy wanted everything battery operated and after the super saw no one working and the Honda generator running all day to charge batteries the next week everything went back to gas generators and cord tools
Homeboy Ryan got that Caine up in that nose. See his left hand clench up when he cut that osb? That’s a good sign
Caine meth or abuse of adderall prescription LOL but yeah i noticed this as well, get a load of what he was doing with his gloves when Stan first walked up to him lol
Ryan has to punch his self to sleep
Those self cleaning heapa vacuums are notorious for filter mechanism failure. They have a power supply chip that automatically kicks in once the tool senses a pressure rise across the filters . We’ve had these for years in Europe.
Ryan's adderall prescription says "Take 1 every 5 hours" He took ONE BOTTLE every 5 mins. JFC!!!
I thought switch to decaffeinated.
Ryan is an absolute electric factory
Man at least they can tell you how long it will run not that I care for battery powered items that should be gas.
Ryan popped a couple Forge batteries that morning.
Lol let's go Brandon! Made me chuckle 😅
How do these cross over tools do in a rainstorm? Theres times when the job has to get done now and mother nature will not wait...
Great stuff Stan..👍👍
$549 bare tool for the duplex nailer is just ludacris. Come on milwaukee seriously? Framing nailers and finish nailers will be used far more often than a duplex nailer. I don’t care what anyone says, you are not forming up enough for that price point to make sense. It needs to be around $200 which is still the standard over priced Milwaukee charge for every new tool.
And you have to buy their nails
If you’re doing concrete work it’s probably the most efficient solution for sticking forms together
Metabo has had a 36volt duplex nailer for a few years and only $350
Now your Talkin Dirt Monkey!!!!! Residential Remodeling Contractor from Boston. Team Milwaukee all the way!!!!I just went ALL M18 Cordless....Best thing I ever Did!!! Great content btw!!!
Sending this to my son’s ,who are in the industry
I’d rather see a roofing nailer than a duplex.
Add a siding nailer to that too!
But Stan! What about milwauke charge time?
Stan the Milwaukee tool I found to be the best one is the sump pump say the power and heat goes out and a pipe bursts in the basement you can then quickly find the water shut off and then pump the water out and reduce the potential for mold damage cause how many people actually put there backup sump pump battery on a battery tender to maintain it
I’ll be looking heavily at that mx submersible pump. For sure
stark difference to the dewalt booth 😂😂😂😂😂
I worked in a shop with the full complete Milwaukee line up.
Overall not as impressed as I thought Id be. The angle grinders are terrible.
The hand tools are nice.
Love the new tool videos!
Cool to see they’re coming out with the vacuum to compete with festool
Billy Mays ain’t dead he’s the new pump guy!
Nice stuff but who can realistically afford all this stuff besides big commercial companies 😅
Tool trucks are carrying milwaukee. Its all about having a payment plan.
Id rather have an extension cord plan.
Stan you went easy on milwaukee compared to dewalt
Because he loves commie China 🇨🇳 like a lot of Americans it really fucking sad how they support China 🇨🇳
Milwaukee is my tool of choice I really like the wacker/ compactor I like that fact that it when the loser drops it it stops on its own I mean when the user drops it But what I did not like what I heard it works faster, compassion is a tedious and slow process so you can get serious compaction in every inch of ground you covered so if you have to go over something four times to get density this sounds like you may have to go eight times to do the same thing
Stan is not Biased he has 1 million subs he does not need to sponsor any tool manufacturer. And he tells it like it is. Old school pulls no punches.
3 hours of run time... a work day is 8 hours
Guy has energy 😂 hope your well stan!
Milwaukee makes the toughest, most reliable tools, and they have the largest tool platform. I owe and have used all the major brands. Going forward, I will only buy Milwaukee. I found Milwaukee batteries work way better in cold up here in Canada.
25 mins lol run time 😂😂😂😂😂😂
4:51 I met this guy too he seemed squrley
$6499 for a jumping jack??? Wow...
Nice one Stan. 👍👍🏴🏴
Whats the purpose for that water pump? Aren't pumped supposed to be directly connected to a power source so they can run 24/7? Please someone explain me this.
Everything in run time is length of run not run time. So 25 minutes. A gasser runs hours then refuel. No wait for $400 batteries to charge.
He was way more critical with the DeWalt tools but we all love battery powered stuff it's just too damn expensive. The key is to quote new tools into the jobs...sometimes it can be done..sometimes your truck needs a transmission...
He said no bog down, after it bogged down
I think he hit the clamp at the end of the run
I need Milwaukee for Christmas 😊
30%-40% longer run time compared to gas tools. 😂
Yeah that's a total joke, as long as you have more gas you can keep going. The only argument is that these electric tools might stay cooler.
I love Milwaukee tools... to me, they're the best on the market. Thanks Stan for taking us around the Milwaukee booth. Ryan needs to stop drinking the high test coffee.
i quit buying Milwaukee battery tools when they discontinued the v18 batteries. i have several sets if them and only a couple of good batteries.
I’m sorry you use far less quality tools now 😂
It’s NEVER SAFE TO USE A CUTTER WITH A LANYARD AROUND YOUR NECK…. WHY DIDN’T SOMEONE TELL THEM???
Soooooo glad I switched to Milwaukee. That "yellow" brand has become a huge disappointment.
550 for a duplex nailer ? Lol what a joke
Ryan is the man
There is no other tool than a Milwaukee
I think Ryan took an adderall....😂
Definitely using it's main ingredient.
lol @ 8:14. The name no one wants right now.
All these companies love being misleading and vague with their answers. Gas bad electric good but cant provide actual real numbers. "We will get back to you" Gas is still more powerful, even with maintenance is still cheaper than the electric tools
Did I hear him right. 4 nails per second. 800 per charge.
So 3.3 mins per charge assuming continuous use.
Ryan likes to party. 😤
Leave it to a Chinese company to market a work light that only lasts 3 hours.
Sad.
Milwaukee popping vacuum is just following the drywall sanders vacuum.. not there technology .. they pop due to drywall dust is so fine and normally clogs any filter.
Stanley you're the greatest buddy there ain't nobody out here doing it like Dirt monkey baby💪🏼💪🏼💚😎👊🏻🗯💥🤟🏻🤟🏻
Cringe
@@craigbancroft3035 G"F"Y"S😂🤣
No Boots are you kidding me
Why did we tiptoe around Milwaukee and jump all over DeWalt.
They just rehearsed better. And their performance stats are never correct either.
Milwaukee keeps innovating, that is for sure. I am hoping and waiting for a second generation of chainsaws for the professional user that address some of the shortcoming of the current ones.
not impressed with the battery life.... it'll get better over time hopefully.
they have been saying that since batteries were invented, and not much has really changed 😂
Amen
I'm not sure why by these sales representative look so desperate. No one has confidence at all
...but I'm really good at choking my rammer.
Cyclonic filtration
Milwaukee is head and shoulders above all…and I buy all dewalt stuff
2.5K for a sump pump?.... FFS
Today's technology is so overpriced. Still using my Craftsman stuff from the 70's and working just fine.
So the nailer doesnt put nails fully and thats a thing to show off?
They're not suppose to sink in all the way
Its called a duplex nailer
🤦🏼♂️
Seems Stanley is a little biased based off how he treated Milwaukee versus DeWalt. What a shame
Let’s go Brandon!
So, he showed us how the new detents for blade depth work on the circular saw and set up the blade perfectly, then he lowered the blade to the wrong depth and cut the OSB. Man, that kid is jacked up on something.
So when the loser uses control of that Compacter it just stops. 😅😂
here to help
But Stan ! why are you so mad ? Try to understand that I do want you as a fan - dewalt
Did Ryan look worse than the other guy?
Milwaukee is losing their minds on price. Theyust be on bidenomics
Dewalt sucks
Oh most power 6 1/2 what a joke milwaukee tools is. Lol
why are ryans hands so cut up LMAO alot of failed takes?
500 for a nailer?? Bro grow some muscle an do it by hand😂😂🤦♂️🤦♂️🤡
I came here to say.... DEWALT
the circ saw guy is full of it. What a load of BS.
5:20 they let him do what he loves and explain well
Lmao does Milwaukee only hire people with a first name that starts with the letter B