Thanks for this video. I didn’t need to do all that extra work but had to find out how to put the same sort of door back on. I struggled for 30 min. Found your video and had it on in 20 seconds. Didn’t realise you had to clip the bottom on to the top. Much appreciated.
Cheers! This is the exact same hinge design as my Fisher & Paykel oven and followed your steps, however the way the half-circle closes up means it'll probably wear out again very quickly. So, what I did was remove the spring completely (in a vice - careful!) and add a pre-loading washer - that worked a treat! Also the hinge assembly was riveted onto the door, so that needed to be drilled out, and I replaced with screws. Don't forget to re-grease everything either ;)
cheers, we've just moved into another home, the simson stove has this problem with the door, we were considering buying a new stove till i saw your post, you have saved me coin by posting this, thanks !!
Thank you so much. I've been struggling to remove the hinges on my oven door for hours and the other videos did not work as they weren't double hinged. I'm very happy |I found your video
After trying to refit my oven door (in my very small kitchen) using a combination of swearing and contortion, I decided TH-cam would probably hold the answer. My neighbours thank you Sir
Thank you! While my oven is a different make, this video and the parts/steps helped me find and fix the lower hinge part that kept the top hinge locked-up, on my ~2004 #compact #Hotpoint oven door that would not close.
Thank you, this video instructed me how to remove the door, once I did that I found that one of the screws holding the mounts to the oven frame was missing, so the hinge couldn't push against it to tip up, replaced the missing screw and popped the door back on, fixed !
Thanks for the time and upload. Fixed my door on the double oven! Taught me also how to remove and replace the door which was too complicated for my brain! Sometimes we need to be shown! Thanks again. p.s. bought my double oven for $25.00. Perhaps the door not closing was why it was cheap!
If you look at the 12second mark, you can see the frame of the oven where the hinge guide top and bottom screws are has been bent out. I would say heavy weight has been put on the door bending the frame, adding to the worn hinges. You can hammer the top screw area back in but after the metal has been stretched it usually will go back after a few months. I usually taken the conical washer off the screw and place it between the guide and the frame, meaning the guide is spaced back at the top and sits more vertical. It’s a little fiddly but does a good job.
"Don't put a heavy weight on oven doors" and "don't lean on fridge doors" should be taught to pre-teens, in school! It's so easy for parents to overlook this--if they ever learned themselves.
Awesome! Thank you so much 😊 I took my oven door off to clean it and had know idea how to get it back on. It’s the exact same hinges ! So THANK YOU! Also I have a fisher and paykel fridge that I want to deep clean it but not sure how. It’s the same one as the fridge that kept beeping
What do you mean "deep clean" . You can pull the back panel off as shown in the video and clean inside. Also the freezer back panel can come off to defrost and clean
what do you do when one of the clips is damaged? I have an ilve with wire clips and one got mashed somehow. I'm pondering wiring the parts together, but any better suggestion?
Mmmm not sure. The top part of the hinge with the hook goes in as far as it can, the most important part is getting the little groove back in on the bottom mount. The only thing I can think of is maybe your springs weren't clicked in properly and have popped out inside the door.
On many ovens, you have to set the clock first before the oven will turn on. Maybe that helps? Pada banyak oven, Anda harus menyetel jam terlebih dahulu sebelum oven menyala. Mungkin itu membantu?
Thank you
At last somebody who’s not afraid to demonstrate how to fix a long hinged oven
the double hinge took the longest time to figure out. thank you for the clear instructions in your video. door handle tightened and the boss is happy.
Thanks for this video. I didn’t need to do all that extra work but had to find out how to put the same sort of door back on. I struggled for 30 min. Found your video and had it on in 20 seconds. Didn’t realise you had to clip the bottom on to the top. Much appreciated.
Absolutely helpful!!! I had no idea how to get the door back on the oven. You saved me
Cheers! This is the exact same hinge design as my Fisher & Paykel oven and followed your steps, however the way the half-circle closes up means it'll probably wear out again very quickly. So, what I did was remove the spring completely (in a vice - careful!) and add a pre-loading washer - that worked a treat! Also the hinge assembly was riveted onto the door, so that needed to be drilled out, and I replaced with screws.
Don't forget to re-grease everything either ;)
cheers, we've just moved into another home, the simson stove has this problem with the door, we were considering buying a new stove till i saw your post, you have saved me coin by posting this, thanks !!
Unreal. Saved my life. I was fixing the oven door at the mother in law's. Got stuck and she told me to look up the Google's..... Yep. Life saver
Thank you so much. I've been struggling to remove the hinges on my oven door for hours and the other videos did not work as they weren't double hinged. I'm very happy |I found your video
Thanks so much! This worked for me even though my hinges are further gone than yours with deeper grooves.
Thanks for this, was struggling with the hinge, saw this and back on in 5 mins!
After trying to refit my oven door (in my very small kitchen) using a combination of swearing and contortion, I decided TH-cam would probably hold the answer. My neighbours thank you Sir
Thank you! While my oven is a different make, this video and the parts/steps helped me find and fix the lower hinge part that kept the top hinge locked-up, on my ~2004 #compact #Hotpoint oven door that would not close.
Thank you, this video instructed me how to remove the door, once I did that I found that one of the screws holding the mounts to the oven frame was missing, so the hinge couldn't push against it to tip up, replaced the missing screw and popped the door back on, fixed !
Thanks for the time and upload. Fixed my door on the double oven! Taught me also how to remove and replace the door which was too complicated for my brain! Sometimes we need to be shown!
Thanks again.
p.s. bought my double oven for $25.00. Perhaps the door not closing was why it was cheap!
Thank you kindly. Yes it did help a lot. God bless you Paul.
Thanks very much. I now have an
oven door that closes as it should.
If you look at the 12second mark, you can see the frame of the oven where the hinge guide top and bottom screws are has been bent out. I would say heavy weight has been put on the door bending the frame, adding to the worn hinges. You can hammer the top screw area back in but after the metal has been stretched it usually will go back after a few months. I usually taken the conical washer off the screw and place it between the guide and the frame, meaning the guide is spaced back at the top and sits more vertical. It’s a little fiddly but does a good job.
Yes you're right. I've bashed the top screws in before. Which has fixed the problem for a while
"Don't put a heavy weight on oven doors" and "don't lean on fridge doors" should be taught to pre-teens, in school! It's so easy for parents to overlook this--if they ever learned themselves.
Thank you very much this is exactly like our oven (indesit) .
Awesome! Thank you so much 😊 I took my oven door off to clean it and had know idea how to get it back on. It’s the exact same hinges ! So THANK YOU! Also I have a fisher and paykel fridge that I want to deep clean it but not sure how. It’s the same one as the fridge that kept beeping
What do you mean "deep clean" . You can pull the back panel off as shown in the video and clean inside. Also the freezer back panel can come off to defrost and clean
Brilliant Thankyou 🙏
This helped alot ❤💯
what do you do when one of the clips is damaged? I have an ilve with wire clips and one got mashed somehow. I'm pondering wiring the parts together, but any better suggestion?
Yes any sort of clip or wire to hold the 2 hinges together while taking the door out should work. Good luck with it.
I took mine off but now it's not staying shut no spring action . Does the top part have to be on tracks or latched on to something in there to stay?
Mmmm not sure.
The top part of the hinge with the hook goes in as far as it can, the most important part is getting the little groove back in on the bottom mount. The only thing I can think of is maybe your springs weren't clicked in properly and have popped out inside the door.
Gracias me salvaste la la vida 👍👍👍👍👍👍👍👍👍
Spot on👍
Great video, thanks
Thank you so much
thank you very much
Thanks. Helpful.
Cheers , the video really helped!
Thank you 🙏🏻 ❤
Saya baru bei oven lewat shope kenapa tdk panas listrik menyala.
Adakah yg salah
On many ovens, you have to set the clock first before the oven will turn on. Maybe that helps?
Pada banyak oven, Anda harus menyetel jam terlebih dahulu sebelum oven menyala. Mungkin itu membantu?
I did everything you did but it didnt work
@@basmam275 sorry to hear
great stuff, needed this.😝pukana
tena koe