No Sir Mr Pete, not lol he is absolutely right. You ARE teaching probably more students every video than pupils you taught in the whole of your teaching career. And I for one are so glad that you are teaching me, and I'm sure every one of your subscribers are just as grateful. Please keep them coming for as long as you are able. Greetings from over the Pond.
Too often my students complain "Why do we need to learn this...". This video shows how knowledge in machine shop, drafting, graphic arts, and even sewing (Fairgate Ruler) all need to co-exist in the same solution to your problem. It was John Dewey that said "Send the WHOLE boy to school", meaning, give him or her a well rounded education. Great series. Never saw a lathe dividing head. Thanks for taking me to school, too.
Your last four sentences are why I watch you,'...even though I could have done this in one tenth the time I like to learn something new...'. I agree 100%, and thank you for the edutainment.
Thank you very much, I had already forgotten that I said that. And I usually do not Expect people to hear things like that. I said for my own entertainment
I just started my classes in Computerized Manufacturing and Machining, and the teacher had one of those old huge teaching aid's in he pulled out on last week.
I don't know the source of it, but it looked exactly like the inch one from your picture. I have been watching abom and a few others often and asked for recommendations for others and he told me about your channel. Been enjoying watching your stuff and what we've done in class
@@wes9731 That one looks to be in better condition (cleaner) than the one my highschool had; Though the picture is making me doubt my memory that school's had decals instead of printed labels under the grease and soot.
A very useful lesson in dividing a circle, from which one can subsequently conquer the world, and then the universe. Definitely a skill worth picking up.
That is an absolutely fabulous series Mr. Pete. Not useless! I had a fine career I based on using what many called "useless" knowledge. You know, algebra, geometry, etc. Out of 120 at the mill I worked at there were exactly 4 of us who could read a standard micrometer or vernier caliper. Dad taught me at about 9yo. It's folks like you that make a difference. Thank you! 👍
Thank you for that. Yes it amazes me sometimes, how little some people know. But they may know a lot about baseball and all the batting averages of all the players, for the last 50 years, LOL.
This has been a very interesting series and I want to thank you for all the work making the videos. I love the detail you include and the stories of Peterson products.
Thanks for making this series. Yes, it was a long and winding journey, but those are usually the more interesting and worthwhile ones to make. I learned quite a bit on this one!
I consider this series a spectacular success. Thank you, Lyle. If this series was about how to put equally divided marks around a cylinder, the dividing head, along with all the effort to create a suitable plate, would in fact be a horrible waste of time on your part for making all those videos and on ours for watching them. As you said, there are just too many easier ways to accomplish that task. The good news is that was not the purpose at all! The purpose was to show how dividing heads work, using somewhat unique hardware and various problem-solving techniques. The exact end product (lines on a cylinder) of the video series is as useless as the micrometer it created but the techniques the series taught are as useful as the teaching aid they created.
We used to do similar, though on production, way back when, (when? I'm thinking of the sixties), but would use a turning tool on its side to make a groove and fill with red or black wax. Keep up the good work Lyle.
Thanks Mr. Pete. Many of your videos make me chuckle because they remind me of the high school counselor 55 years ago who told me I didn't need to take an algebra class because I was "just an industrial arts student". I wish I could have shown him when I got a "B" in calculus years later. : )
Some counselors are clueless, because they never took Shop classes. Also, many people look down on shop classes and shop teachers, and even shop students. I experience that many times. That cause me to have poor self image, which I still have
"Left Hand Monkey Wrench" Lol!!! Love it! I still have the micrometer dad taught me how to read when I was in the third grade in school. Teacher and kids had no clue what I had for show and tell and what it was used for. Totally Greek to them. As always, thanks for sharing Mr. Pete, Ken
An Apple for the teacher. It was a good series, well-thought-out and I learned something about making the dividing head plates. Thanks for all the effort.
Mr. Pete, you find the coolest toys! I've worked in the military and industry for over 40 years and never knew such a device existed. Thank you for the education.
This has been interesting process for sure again the information you presented is useful in showing something most of us probably have never seen much less used. Great job
What I love about machining is that very simple concepts and operations can create parts or features that your average Joe would have no idea how it was done. Little does average Joe know that it was dead simple....if you know how to do it. Thanks as always Mr Pete!
Always enjoy learning, that's why this is my #1 TH-cam channel, I learn so much here! Thanks for the great demonstration on the lathe dividing head Mr. Pete! You explained it very well and that teaching aid came out great as too!
Awesome. I like that little dividing head! I was an early adopter of Powerpoint and making digital photographs to avoid having dozens of 3" binders full of overhead transparencies. As far as digital versus mechanical tools - many years ago I had an apprentice condemn all 4 rotors on a vehicle as under-size. His measurements showed the rotors to be considerably thinner than they actually were; the rotors were replaced a year previous and were basically brand new. The customer - a machinist ironically - came out to look at the rotors and estimated the thickness by eye. When a mechanical vernier caliper was used the estimate was much closer than the measurements taken with the inexpensive digital caliper used by the apprentice. I prefer mechanical tools, no batteries, no sensor deterioration... My eyes don't care so much for them anymore though.
I have said before and I will say it again, I wish I could have been in your shop class. I would have probably gone on to study industrial arts and teach. Thanks for all of your efforts, they are appreciated.
Interesting lesson, my friend. We didn't have teaching aids like this in the school shop. Just large wall-size charts that illustrated using a micrometer. We did have a large slide rule teaching aid (you no doubt remember those) suspended above the blackboard that was used to teach the solution of problems using the various scales on a slide rule. Those were great old days, punctuated only by the anxious realization that the draft board sent notices in the mail on Tuesdays.
I had some big micrometer charts at school, but they were already ancient and falling apart when I started in 1967. I must’ve thrown them away. And yes, the math and science teachers have those big slide rules.
And also, I did get my notice from the draft board to report for a physical. But I do not remember the day of the week, I was too traumatized to recall.
Thanks a lot for this video! As someone trying to learn this stuff on my own, I've seen a lot of videos on dividing in a lathe, and I think this may be my favourite. By making the machining operation be something as simple as making a mark with a marker, you can see the entire flow of the process, but without getting bogged down in the more complicated secondary operations that are usually involved.
When I started engineering school we ALL had to take Slide Rule class. There was a six foot long slide rule mounted about 5 1/2 feet above the floor in two rings supported by a frame mounted on casters. It was an enlarged version of out slide rules including the markings. The thing was extremely accurate because it was very easy to adjust the slide and traveller.
This was a lot of fun, and I love that you made a point to wear your safety glasses during the dividing head operation with the Sharpie. (I'm very big on maintaining good habits because safety shortcuts are like potato chips: People never have just one.) Thanks.
As always I enjoyed. I also learned a lot. Your so easy to listen to. Keep them coming. I'm thinking you must have been one of the few, with a video camera in the 70's-80's that used it for teaching children. Thanks again.
Yes, and when I look back, I am kind of a maze that I was in to the new technology. I was the only one in the school that had that equipment at that time. And it was bought with my dime. Don’t get me wrong, I am not a trend setter
Very in formative... I was in the welding shop and we didn't learn about micrometers but I was fortunate to get a job in a machine shop where the owner was an older gentleman took me under his wing and taught me a lot about Machine Tools
Mr Pete a man more interested in teaching students how to grow up with a skill to improve their quality of life for a better citizen for our county so they wouldn’t end up in prison on welfare or on drugs or alcohol for that mr Pete we thank you for a job well done and beyond the call of duty with Peterson’s products no tell how many kids across this great country that would have fell through the cracks just because they couldn’t see what the teacher was showing and learned a skill that made this country one of the greatest country in the world thank you
A fine finish to a long series. I still have sheets and sheets of Letraset and Ziptone. And a few pieces of Rubylith, in fact. Last major machine restoration I did (20 foot bed, 48" swing lathe, pre-20th century) got letraset labels for the controls and oil points. Clean the paint, rub on, then several coats of clear to protect them. Held up well in service. I still use, and teach, with conventional measuring tools. There is value in understanding the principle in measurement, reliable, robust, and I can get top quality inexpensively on the used market so I can have a sufficient number of calipers and mics on hand. Also can hand them off to students in need when they move on.
Beta was used in television due to it's quality. You could make copies of copies and the quality remained high for a several generations. All our recorded video was on beta. We had a 4 player setup at the tv station that ran commercials. It had gobs of tapes available and a trolley system that would grab the tape, stuff it in the player, then return it to it's place. Back before digital took over. Boxes of tapes would make their way to the news set to be played during the news cast. Woe to the intern that dropped a box. All the taps had to be re-tensioned and re-cued....
Thank you for that, that is very interesting to me. I do remember that when I went to the Chicago auto show a few years back, all of the TV stations were using beta cameras
My father was in charge of the Calibration Lab for all the test equipment and Microscopes for one of IBM Plants where they made the Wafers and IC for IBM computers in the '60s and '70s. Electronic Test equipment was not handled by his group (O'Scopes, Multimeters Etc). All the masters they had in their LAB were 1 jump away from the NBS masters. Sometimes some of the items were so out of Calibration and could not be fixed (but still usable by a school) he was able to get them donated to the Trade Shop section of our High School - Also sometimes it was marking that were removed from all the use they got. His lab was a Class A cleanroom - Coat with hood, boot covers Mask. It was a AA plate. One year during the summer break he was able to get the plant to Calibration on all the items in the machine shop, Auto Shop, and Electronic Class.
Us Septuagenarians have to stick together. All your friends, you do not know, came and saw and enjoyed. You keep doing the things you do and we'll keep coming back and looking.
@@mrpete222 My pleasure. I didn't have a shop teacher any where near as good as you are. I wish I had. I probably will never have a dividing head. But if one falls into my lap, I'll know how to use it. Thanx.
Love me some mrpete222 videos. Every time I watch one, for some reason, I always wish we had a bunch of Mr. Petersons in Congress, or at least as Secretary of Education.
Another great video Mr Pete. I do like to see the manual set ups. I work mostly cnc and miss the manual setting. I enjoy these videos and lets face it, they're better than the stuff on television.
I love learning now. Even though I am 63. Back in high school I probably would have taken machine shop except the teacher was too much to take. So I wound up being a Mechanic instead. Who knows how much differently my life would have turned out?
Yes, he was often Rude and abusive to me. He was never any help. I recall once that he made our home ec teacher cry. She was a sweetie that everyone on the faculty loved, a great cook, and made cookies for everyone. But he was cruel to her. And she wasn’t bad looking either
Mr. Pete, This video is the ninth video if you count the other eight videos on index plate making in your series. You often say "I know I'm beating this subject to death", I and I'm sure all the other viewers love it when you beat a subject to death. I always look forward to seeing your latest videos. Hope to see and talk to you again at this years Bar-Z Bash.
That layout triangle was making my eyes water - the perspective was just so wrong, I had no idea what it was and what shape it was - vanishing point was just wrong. So many tools ... Keep up the anecdotes, sir. I really enjoyed hearing about your Betamax machine.
Wow! A a collector of micrometers I would love to get my hands on one of those old teaching aids. Do you know if any of them are still floating around out there? Do they ever pop up on eBay? Great work!
A few people around the country have told me that they have seen them in classrooms. So there must still be if you were around. But I have none myself. And by the way, I love your videos
@@mrpete222 that's cool, so maybe there is a chance one will turn up! Just hope they don't go the way of much old teaching material, into a dumpster! And thank you, that means a lot! Between you, Tom Lipton and Abom69 I wouldn't know anything near what I do now about machining. These videos are a treasure!
Another great video! I think I learned to read a micrometer from our industrial arts book but that was over fifty years ago and I can't be sure! I was (am) so interested in shop work that I always read far ahead of the current lesson.
Hi Lyle, From early in your video I was thinking camera and screen and a normal micrometer, we have technology, and I'm also a septuagenarian. The problem with any digital readout is it's not linear but stepped, so the "old fashioned" one will show if you are somewhere in between divisions where the digital will not, and while we might be only talking 0.001" or 0.01mm, that can mean an interference fit or a clearance fit. So learning how to read both forms is important. Also traditional micrometers are still readable with our deteriorating eye sight, where counting divisions on a vernier I find much harder. The dial type is a better option. I think there are more people out there who learn a great deal from you and many other you tube presenters. Regards Dennis.
Thank you very much, you’ll make some good points. Some of the digital micrometers read to four places. Also some of them have engraved lines as well. That may help you determine how far you are in between numbers. Most people are lucky to get within two or 3 thousands anyway But I think we are stuck in the olden days
I used Letraset and Mecanorma back in the days when "camera ready" artwork was made by pasting up bits of paper with "Cow Gum". The smell of Cow Gum still instantly takes me back to those times - although they had to change the smell as the solvent they used turned out to be toxic.
Yes, I remember all of that. Paste up as what we called it. Odors, aromas, and smells instantly affect my brain and bring certain thoughts and memories back. The smell of a girls perfume or hair are good examples.
Very nice, Mr. Pete. The tape transport and tape playing mechanism like Betamax was superior. But the best designs don't always win when it comes to retail marketing. Beta style mechanisms survived commercially, that is in broadcast/professional areas long after VHS won the home video player contest. The commercial players used a wider tape and larger cassettes, but the player/recorder mechanism was pretty much the same, just scaled up.
As students we never realised the lengths that some of our now (in most cases) fondly-remembered teachers went to deliver the curriculum - thank you for your recollections from the coal face, the insights from the other side of the teacher's desk are always interesting to my adult self :). I was at primary school in the late 1970's as the AV revolution was starting to take off down under -I feel that some teachers used AV to augment the content delivery, and a few just used it to fit in a snooze :) (it takes all kinds, I reckon). There was lots of educational government-broadcaster-sourced content.down under, the teacher would wheel out a 20" TV on a tall trolley and play a video cassette or a real-time broadcast - still a bit hard to see from the back of the room at times :)
Hi Mr Pete, thanks for showing this divider. You mentioned that the thread was not coarse enough in the model, you probably don’t want any extra work but would drilling and tapping for 3/4 10 tpi and replacing the apparent threaded rod or bolt with matching thread work?
Its a very nice teching movie how to make a precision measuring instrument using artistic tools, mechanic aid (dividing head) big machine (lathe), little fractional math. Thanks very much!
Regarding the need to know how to read old school verniers and measuring tools. I like the digital readouts, they make reading the mic's easy. However, are you going to quit work and go home when the battery runs down and you don't have a spare battery. I think even though we like to use the new tools because they are easy to use, we still need to know how to use the old reliable mic's with engraved markings and sometimes with verniers. You are not wasting any body's time teaching people how to read old school tools. Just a suggestion, maybe a video on reading vernier scales! Love the vids, keep them coming.
I agree totally with you. And I just hate batteries. You may have noticed that recently I purchased a starrett vernier caliper. My original intentions were to make a video as you mentioned. But I have been making too many videos that I think would be neat for the viewers, but there were no viewers.
I've got to say I have thoroughly enjoyed watching this epic miniseries. You are if nothing else a very determined person...and also you are your own worst critic. BTW I do know people who also bought into the Beta format. I didn't but do know people who did.Lol!
Canuck Loyalist I had s Betamax back in the early 80’s, used it for years before VHS came out. There was only one store in Pittsburgh that rented beta tape movies back then and it was a 40 minute drive round trip. But don’t knock the format. TV stations used beta machines to archive footage, still may for all I know. It’s the best non digital format
I was going to do that, but it would have been too narrow. And by then I realize why I go to the effort and no one will watch this anyway. And of course that was a self-fulfilling prophecy, LOL.
I love your teaching style! As an engineering student my wheels are always turning. I have noticed most of the older lathes have the head-stock mounted on top of the ways. I also hear they always have wear in the same area on the ways and lead screws. That makes sense because most work is done close to the head. Did any of the old engineers not think to make the bed symmetrical so you could turn it around and mount the head and tail components on the opposite sides? Like flipping your mattress. This would allow extended life of the ways. I was looking at a Southbend lathe from pictures and the base of the bed ends are of different sizes with the head being larger to allow the belts to be fed from underneath. If you fed the belts from the rear do you know if a bed flip is possible?
I do not think that would work. But everything you said makes a lot of sense. But of course they didn’t want them to last forever. The sooner they were out the better. Will sell them another one. And then another one. Ad infinitum.
Lyle thx for sharing. I wasn't aware that a dividing head was available for a lathe spindle. That was so cool. I'm going to work on an adapter for my 6" dividing table for my lathe spindle. Keep up the great lessons. You know many micrometers are still around that are not digital. So, knowing how to read a manual micrometer is still important. I wonder if a clear coat of paint would protect the markings that you put on that teaching aid? Hopefully it wouldn't dissolve the ink and leave you with a smeary mess. Thx again for sharing, indexing, that is.
What do you mean you're not teaching anymore? You're teaching millions now and I"m glad you're doing it.
lol
So am I even though I do know alot of this stuff he has so much information I wish my teschers would have went into
Exactly, he's teaching every day, 24 hours a day, without even leaving his workshop, and doing it extremely well too.
No Sir Mr Pete, not lol he is absolutely right. You ARE teaching probably more students every video than pupils you taught in the whole of your teaching career. And I for one are so glad that you are teaching me, and I'm sure every one of your subscribers are just as grateful. Please keep them coming for as long as you are able. Greetings from over the Pond.
Has taught me a lot
Too often my students complain "Why do we need to learn this...". This video shows how knowledge in machine shop, drafting, graphic arts, and even sewing (Fairgate Ruler) all need to co-exist in the same solution to your problem. It was John Dewey that said "Send the WHOLE boy to school", meaning, give him or her a well rounded education.
Great series. Never saw a lathe dividing head. Thanks for taking me to school, too.
Your last four sentences are why I watch you,'...even though I could have done this in one tenth the time I like to learn something new...'. I agree 100%, and thank you for the edutainment.
Thank you very much, I had already forgotten that I said that. And I usually do not Expect people to hear things like that. I said for my own entertainment
I wish I had been in your shop class when I was young. Glad you are still teaching us!
👍👌😆😆
Nice project, a lot of effort, great demo of the dividing head.
Thank you Randy
I just started my classes in Computerized Manufacturing and Machining, and the teacher had one of those old huge teaching aid's in he pulled out on last week.
Really, that’s interesting. Was it one of my original ones?
I don't know the source of it, but it looked exactly like the inch one from your picture.
I have been watching abom and a few others often and asked for recommendations for others and he told me about your channel. Been enjoying watching your stuff and what we've done in class
Here is the one used in class that we were shown.
imgur.com/a/fkbzgyD
@@wes9731 That one looks to be in better condition (cleaner) than the one my highschool had; Though the picture is making me doubt my memory that school's had decals instead of printed labels under the grease and soot.
First time I have ever seen a lathe divider in action!
Me too
A very useful lesson in dividing a circle, from which one can subsequently conquer the world, and then the universe. Definitely a skill worth picking up.
Yes
That is an absolutely fabulous series Mr. Pete. Not useless! I had a fine career I based on using what many called "useless" knowledge. You know, algebra, geometry, etc. Out of 120 at the mill I worked at there were exactly 4 of us who could read a standard micrometer or vernier caliper. Dad taught me at about 9yo. It's folks like you that make a difference. Thank you! 👍
Thank you for that. Yes it amazes me sometimes, how little some people know. But they may know a lot about baseball and all the batting averages of all the players, for the last 50 years, LOL.
This has been a very interesting series and I want to thank you for all the work making the videos. I love the detail you include and the stories of Peterson products.
Thanks 😊
Thanks for making this series. Yes, it was a long and winding journey, but those are usually the more interesting and worthwhile ones to make. I learned quite a bit on this one!
THANK YOU...for sharing. Watched and very much enjoyed.
Thanks
I consider this series a spectacular success. Thank you, Lyle.
If this series was about how to put equally divided marks around a cylinder, the dividing head, along with all the effort to create a suitable plate, would in fact be a horrible waste of time on your part for making all those videos and on ours for watching them. As you said, there are just too many easier ways to accomplish that task.
The good news is that was not the purpose at all! The purpose was to show how dividing heads work, using somewhat unique hardware and various problem-solving techniques. The exact end product (lines on a cylinder) of the video series is as useless as the micrometer it created but the techniques the series taught are as useful as the teaching aid they created.
Thanks
We used to do similar, though on production, way back when, (when? I'm thinking of the sixties), but would use a turning tool on its side to make a groove and fill with red or black wax. Keep up the good work Lyle.
👍👍
I think your are a great teacher.
Thanks Mr. Pete. Many of your videos make me chuckle because they remind me of the high school counselor 55 years ago who told me I didn't need to take an algebra class because I was "just an industrial arts student". I wish I could have shown him when I got a "B" in calculus years later. : )
Some counselors are clueless, because they never took Shop classes. Also, many people look down on shop classes and shop teachers, and even shop students. I experience that many times. That cause me to have poor self image, which I still have
"Left Hand Monkey Wrench" Lol!!! Love it!
I still have the micrometer dad taught me how to read when I was in the third grade in school. Teacher and kids had no clue what I had for show and tell and what it was used for. Totally Greek to them. As always, thanks for sharing Mr. Pete, Ken
Left hand monkey wrench was just saying that my dad off the news. Sounds like we both have fond memories of our dads.
An Apple for the teacher. It was a good series, well-thought-out and I learned something about making the dividing head plates. Thanks for all the effort.
Thanks
Mr. Pete, you find the coolest toys! I've worked in the military and industry for over 40 years and never knew such a device existed. Thank you for the education.
This has been interesting process for sure again the information you presented is useful in showing something most of us probably have never seen much less used. Great job
What I love about machining is that very simple concepts and operations can create parts or features that your average Joe would have no idea how it was done. Little does average Joe know that it was dead simple....if you know how to do it. Thanks as always Mr Pete!
Thanks for the information and the walk back in time to when school actually still had shop classes. As always a great teacher you'll always be !
Thank you very much
Thank you Lyle. Once again, I was entertained.
Always enjoy learning, that's why this is my #1 TH-cam channel, I learn so much here!
Thanks for the great demonstration on the lathe dividing head Mr. Pete! You explained it very well and that teaching aid came out great as too!
Awesome. I like that little dividing head! I was an early adopter of Powerpoint and making digital photographs to avoid having dozens of 3" binders full of overhead transparencies. As far as digital versus mechanical tools - many years ago I had an apprentice condemn all 4 rotors on a vehicle as under-size. His measurements showed the rotors to be considerably thinner than they actually were; the rotors were replaced a year previous and were basically brand new. The customer - a machinist ironically - came out to look at the rotors and estimated the thickness by eye. When a mechanical vernier caliper was used the estimate was much closer than the measurements taken with the inexpensive digital caliper used by the apprentice. I prefer mechanical tools, no batteries, no sensor deterioration... My eyes don't care so much for them anymore though.
There is a lot of truth in what you just said. I do like my digital calipers, but in general prefer the older mechanical measuring instruments.
Absolutely love your videos, especially when you go off on a tangent. Brilliant, thank you
Thank you very much
I have said before and I will say it again, I wish I could have been in your shop class. I would have probably gone on to study industrial arts and teach. Thanks for all of your efforts, they are appreciated.
👍👍
thank you for making me laugh and teaching me something at the same time
lol 👍
Interesting lesson, my friend. We didn't have teaching aids like this in the school shop. Just large wall-size charts that illustrated using a micrometer. We did have a large slide rule teaching aid (you no doubt remember those) suspended above the blackboard that was used to teach the solution of problems using the various scales on a slide rule. Those were great old days, punctuated only by the anxious realization that the draft board sent notices in the mail on Tuesdays.
I had some big micrometer charts at school, but they were already ancient and falling apart when I started in 1967. I must’ve thrown them away. And yes, the math and science teachers have those big slide rules.
And also, I did get my notice from the draft board to report for a physical. But I do not remember the day of the week, I was too traumatized to recall.
An absolute pleasure to watch your lessons.
Thanks
Thanks a lot for this video! As someone trying to learn this stuff on my own, I've seen a lot of videos on dividing in a lathe, and I think this may be my favourite. By making the machining operation be something as simple as making a mark with a marker, you can see the entire flow of the process, but without getting bogged down in the more complicated secondary operations that are usually involved.
Thank you, I’m glad you liked it
When I started engineering school we ALL had to take Slide Rule class. There was a six foot long slide rule mounted about 5 1/2 feet above the floor in two rings supported by a frame mounted on casters. It was an enlarged version of out slide rules including the markings. The thing was extremely accurate because it was very easy to adjust the slide and traveller.
I remember those from science class
Great job that is why I sat on the front row.like I am wright now in my seat.no skipping class in mrpete class.
lol
This was a lot of fun, and I love that you made a point to wear your safety glasses during the dividing head operation with the Sharpie. (I'm very big on maintaining good habits because safety shortcuts are like potato chips: People never have just one.) Thanks.
lol
Good morning Mr. Pete, Looks fine from my view. Now its coffee time!
Yes
Mr Pete today’s video is fantastic I learned so much you are still a great teacher I learned so much from this group of videos I enjoy them so much
As always I enjoyed. I also learned a lot. Your so easy to listen to. Keep them coming.
I'm thinking you must have been one of the few, with a video camera in the 70's-80's
that used it for teaching children. Thanks again.
Yes, and when I look back, I am kind of a maze that I was in to the new technology. I was the only one in the school that had that equipment at that time. And it was bought with my dime. Don’t get me wrong, I am not a trend setter
Grate video, and always learning. If you stop learning you stop living. Have a grate day Mr Pete!
That is quite a truism
Very in formative...
I was in the welding shop and we didn't learn about micrometers but I was fortunate to get a job in a machine shop where the owner was an older gentleman took me under his wing and taught me a lot about Machine Tools
👌
yes mr Pete I also like to learn new things Thankyou for your videoes !! Mark
Thanks
An absolutely delightful video. I enjoyed your comments regarding your successful past and how life really was. Your a pretty good guy.
Thanks
Thanks Mr Pete, I love old school technology said anybody can read a digital micrometer until the battery goes flat lol👍👍👍
lol
Mr Pete a man more interested in teaching students how to grow up with a skill to improve their quality of life for a better citizen for our county so they wouldn’t end up in prison on welfare or on drugs or alcohol for that mr Pete we thank you for a job well done and beyond the call of duty with Peterson’s products no tell how many kids across this great country that would have fell through the cracks just because they couldn’t see what the teacher was showing and learned a skill that made this country one of the greatest country in the world thank you
A fine finish to a long series. I still have sheets and sheets of Letraset and Ziptone. And a few pieces of Rubylith, in fact. Last major machine restoration I did (20 foot bed, 48" swing lathe, pre-20th century) got letraset labels for the controls and oil points. Clean the paint, rub on, then several coats of clear to protect them. Held up well in service. I still use, and teach, with conventional measuring tools. There is value in understanding the principle in measurement, reliable, robust, and I can get top quality inexpensively on the used market so I can have a sufficient number of calipers and mics on hand. Also can hand them off to students in need when they move on.
👍👍👍
A doohickey hahaha you deserve a lifetime teaching award thanks for sharing
Thanks
Beta was used in television due to it's quality. You could make copies of copies and the quality remained high for a several generations. All our recorded video was on beta. We had a 4 player setup at the tv station that ran commercials. It had gobs of tapes available and a trolley system that would grab the tape, stuff it in the player, then return it to it's place. Back before digital took over. Boxes of tapes would make their way to the news set to be played during the news cast. Woe to the intern that dropped a box. All the taps had to be re-tensioned and re-cued....
Thank you for that, that is very interesting to me. I do remember that when I went to the Chicago auto show a few years back, all of the TV stations were using beta cameras
Yet another interesting video. Thank you Mr. Peterson
Thanks
This was awesome Mr. Pete! I never knew they made a dividing head like that for a lathe.
"Crazy like Lindsay" Now that's funny!
You are the only one that understood that, LOL
My uncle used to teach slide rule use at the utility company he worked for. I still have his 3-foot long teaching slide rule hanging in my shed.
👍👍👍
My father was in charge of the Calibration Lab for all the test equipment and Microscopes for one of IBM Plants where they made the Wafers and IC for IBM computers in the '60s and '70s. Electronic Test equipment was not handled by his group (O'Scopes, Multimeters Etc). All the masters they had in their LAB were 1 jump away from the NBS masters. Sometimes some of the items were so out of Calibration and could not be fixed (but still usable by a school) he was able to get them donated to the Trade Shop section of our High School - Also sometimes it was marking that were removed from all the use they got. His lab was a Class A cleanroom - Coat with hood, boot covers Mask. It was a AA plate. One year during the summer break he was able to get the plant to Calibration on all the items in the machine shop, Auto Shop, and Electronic Class.
Thank you, very interesting
Thanks for Sunday School!
lol
A lot of great info. Now to blow snow
Ehhh.. ohhh snow snow. Thought we watched TH-cam the same way....
Oh man!!! That is entertainment and educational 👏🏻👏🏻👏🏻
👍
Us Septuagenarians have to stick together. All your friends, you do not know, came and saw and enjoyed. You keep doing the things you do and we'll keep coming back and looking.
Thank you very much
@@mrpete222 My pleasure. I didn't have a shop teacher any where near as good as you are. I wish I had. I probably will never have a dividing head. But if one falls into my lap, I'll know how to use it. Thanx.
Mr Pete you are the BEST thank you
Out of good better and best, I hope I am at least good!
Love me some mrpete222 videos. Every time I watch one, for some reason, I always wish we had a bunch of Mr. Petersons in Congress, or at least as Secretary of Education.
Thanks. I would like to straighten them out in Washington.
I enjoy learning something new..It is good exercise for the brain.. especially as we get old
Yes
Another great video Mr Pete. I do like to see the manual set ups. I work mostly cnc and miss the manual setting.
I enjoy these videos and lets face it, they're better than the stuff on television.
Thanks
I love learning now. Even though I am 63. Back in high school I probably would have taken machine shop except the teacher was too much to take. So I wound up being a Mechanic instead. Who knows how much differently my life would have turned out?
G'day Tubalcain. Dividing on the lathe is a stimulating topic. Thanks!
👍
Thanks Lyle, I had no clue how to do that before! Thanks again!
👍👍
AV Director=non faculty=above scale=arrogant=bully. Love your videos Mr Pete.
Yes, he was often Rude and abusive to me. He was never any help. I recall once that he made our home ec teacher cry. She was a sweetie that everyone on the faculty loved, a great cook, and made cookies for everyone. But he was cruel to her. And she wasn’t bad looking either
Mr. Pete, This video is the ninth video if you count the other eight videos on index plate making in your series. You often say "I know I'm beating this subject to death", I and I'm sure all the other viewers love it when you beat a subject to death. I always look forward to seeing your latest videos. Hope to see and talk to you again at this years Bar-Z Bash.
👍👍
That layout triangle was making my eyes water - the perspective was just so wrong, I had no idea what it was and what shape it was - vanishing point was just wrong. So many tools ...
Keep up the anecdotes, sir. I really enjoyed hearing about your Betamax machine.
lol
Awesome video from a Manufacturing instructor in Maryland!
Thanks
Thanks mr Pete
👍
Wow! A a collector of micrometers I would love to get my hands on one of those old teaching aids. Do you know if any of them are still floating around out there? Do they ever pop up on eBay? Great work!
A few people around the country have told me that they have seen them in classrooms. So there must still be if you were around. But I have none myself. And by the way, I love your videos
@@mrpete222 that's cool, so maybe there is a chance one will turn up! Just hope they don't go the way of much old teaching material, into a dumpster!
And thank you, that means a lot! Between you, Tom Lipton and Abom69 I wouldn't know anything near what I do now about machining. These videos are a treasure!
Excellent tutorial - thanks!
Thanks
Once again, Amazing video to watch with my coffee. I goofed in school, and took woodshop, then football. Today I use machine tools!
Thanks
Nice teaching aide. It's way better than crooked photocopied micrometer readings with all the lines blurred together.
Another great video! I think I learned to read a micrometer from our industrial arts book but that was over fifty years ago and I can't be sure! I was (am) so interested in shop work that I always read far ahead of the current lesson.
You were an exceptional student then. I could not get the kids to crack the book
Man, your magic marker script is perfect! I'm impressed how nicely done that is. A . . . Ok A-,A+ when completed. You have one day.
Acid resist then dip bevel in acid. Then enamel marks.
Thanks
Nice work pete !!!
Nice job.
Mr. Pete maybe you could use some type of spray lacquer to protect the lines?
I was thinking that
I was thinking of something similar. I think I sense another learning experience coming on.
trialnterror Forby’s Tung oil spray finish will work very well on metal
I had never heard of decalcomania. Thanks for the trivia!
👍
Hi Lyle,
From early in your video I was thinking camera and screen and a normal micrometer, we have technology, and I'm also a septuagenarian.
The problem with any digital readout is it's not linear but stepped, so the "old fashioned" one will show if you are somewhere in between divisions where the digital will not, and while we might be only talking 0.001" or 0.01mm, that can mean an interference fit or a clearance fit. So learning how to read both forms is important. Also traditional micrometers are still readable with our deteriorating eye sight, where counting divisions on a vernier I find much harder. The dial type is a better option.
I think there are more people out there who learn a great deal from you and many other you tube presenters.
Regards Dennis.
Thank you very much, you’ll make some good points. Some of the digital micrometers read to four places. Also some of them have engraved lines as well. That may help you determine how far you are in between numbers. Most people are lucky to get within two or 3 thousands anyway But I think we are stuck in the olden days
Your still teaching mrpete222 😉 thanks for another educational video.
👍
I used Letraset and Mecanorma back in the days when "camera ready" artwork was made by pasting up bits of paper with "Cow Gum". The smell of Cow Gum still instantly takes me back to those times - although they had to change the smell as the solvent they used turned out to be toxic.
Yes, I remember all of that. Paste up as what we called it. Odors, aromas, and smells instantly affect my brain and bring certain thoughts and memories back. The smell of a girls perfume or hair are good examples.
Very nice, Mr. Pete.
The tape transport and tape playing mechanism like Betamax was superior. But the best designs don't always win when it comes to retail marketing. Beta style mechanisms survived commercially, that is in broadcast/professional areas long after VHS won the home video player contest. The commercial players used a wider tape and larger cassettes, but the player/recorder mechanism was pretty much the same, just scaled up.
Looks good, Mr. Pete. Thanks for the video.
Thanks
That was a SUPER interesting demonstration with the dividing head, amazing! Thank you Mr. Pete! Dave in RI
Thanks
As students we never realised the lengths that some of our now (in most cases) fondly-remembered teachers went to deliver the curriculum - thank you for your recollections from the coal face, the insights from the other side of the teacher's desk are always interesting to my adult self :). I was at primary school in the late 1970's as the AV revolution was starting to take off down under -I feel that some teachers used AV to augment the content delivery, and a few just used it to fit in a snooze :) (it takes all kinds, I reckon). There was lots of educational government-broadcaster-sourced content.down under, the teacher would wheel out a 20" TV on a tall trolley and play a video cassette or a real-time broadcast - still a bit hard to see from the back of the room at times :)
Thanks
from one septuagenarian to another well done
lol
I would have loved to have had you as my machine shop teacher!!
👍👍👍
Hi Mr Pete, thanks for showing this divider. You mentioned that the thread was not coarse enough in the model, you probably don’t want any extra work but would drilling and tapping for 3/4 10 tpi and replacing the apparent threaded rod or bolt with matching thread work?
I sooooo wish I could go back in time and have had the ability to be one of your students!
👍👍
Its a very nice teching movie how to make a precision measuring instrument using artistic tools, mechanic aid (dividing head) big machine (lathe), little fractional math.
Thanks very much!
Thanks
Regarding the need to know how to read old school verniers and measuring tools. I like the digital readouts, they make reading the mic's easy. However, are you going to quit work and go home when the battery runs down and you don't have a spare battery. I think even though we like to use the new tools because they are easy to use, we still need to know how to use the old reliable mic's with engraved markings and sometimes with verniers. You are not wasting any body's time teaching people how to read old school tools. Just a suggestion, maybe a video on reading vernier scales! Love the vids, keep them coming.
I agree totally with you. And I just hate batteries. You may have noticed that recently I purchased a starrett vernier caliper. My original intentions were to make a video as you mentioned. But I have been making too many videos that I think would be neat for the viewers, but there were no viewers.
Veery. Cool. Thank you for posting.
👍👍
mrpete222 👍👍👍
I've got to say I have thoroughly enjoyed watching this epic miniseries. You are if nothing else a very determined person...and also you are your own worst critic. BTW I do know people who also bought into the Beta format. I didn't but do know people who did.Lol!
👍
Canuck Loyalist I had s Betamax back in the early 80’s, used it for years before VHS came out. There was only one store in Pittsburgh that rented beta tape movies back then and it was a 40 minute drive round trip. But don’t knock the format. TV stations used beta machines to archive footage, still may for all I know. It’s the best non digital format
Thanks Mr. Pete, i had a good hard chuckle with the " well there is no purpose of this video" I'm glad I had just swallowed my coffee...lol
lol
Very impressive thank you sir
Thanks
23:17 I use to use a product called Press Type which is probably the same as Zipatone.
Transfer Type was the name we used to describe those rub on letters.
Nice video! That looks like a fun project. I'm a bit surprised you didn't use a 60° lathe tool as a graver to get nice engraving.
I was going to do that, but it would have been too narrow. And by then I realize why I go to the effort and no one will watch this anyway. And of course that was a self-fulfilling prophecy, LOL.
I love your teaching style! As an engineering student my wheels are always turning. I have noticed most of the older lathes have the head-stock mounted on top of the ways. I also hear they always have wear in the same area on the ways and lead screws. That makes sense because most work is done close to the head. Did any of the old engineers not think to make the bed symmetrical so you could turn it around and mount the head and tail components on the opposite sides? Like flipping your mattress. This would allow extended life of the ways. I was looking at a Southbend lathe from pictures and the base of the bed ends are of different sizes with the head being larger to allow the belts to be fed from underneath. If you fed the belts from the rear do you know if a bed flip is possible?
I do not think that would work. But everything you said makes a lot of sense. But of course they didn’t want them to last forever. The sooner they were out the better. Will sell them another one. And then another one. Ad infinitum.
Lyle thx for sharing. I wasn't aware that a dividing head was available for a lathe spindle. That was so cool. I'm going to work on an adapter for my 6" dividing table for my lathe spindle. Keep up the great lessons. You know many micrometers are still around that are not digital. So, knowing how to read a manual micrometer is still important.
I wonder if a clear coat of paint would protect the markings that you put on that teaching aid? Hopefully it wouldn't dissolve the ink and leave you with a smeary mess.
Thx again for sharing, indexing, that is.
I have never heard of a lathe Index head until I bought this one a few months ago. I did not know what it was when I bought it
Professor, I like it.
Thanks
Thats great