Poly-clip System - TSCA 120/TSCA 160 - Automatic Sealing/Clipping Machines (en)

Automatic Sealing/Clipping Machines TSCA 120 and TSCA 160 by Poly-clip System: gain in efficiency
The TSCA processes flat film from a roll into a ready-to-fill tube which is securely closed by the integral clipping unit.
TSCA 120:
• For chubs up to calibres 120 mm
• Up to ≥ 200 cycles per minute in continuous mode
TSCA 160:
• For chubs up to calibres 160 mm
• Up to 160 cycles per minute in continuous mode
The TSCA consists of a synchronized automatic sealing machine and double-clipper. This provides a continuous production line when a stuffer is used at the front end.
Both production processes are operator-friendly and are easily programmable via the central SAFETY TOUCH panel. The PC control allows a very fast and accurate signal processing. On the SAFETY TOUCH display the diagnostic system provides a direct and clear indication of the machine’s operational status as well an analysis of filling and clipping times.
The unit is operated via six membrane keys on the control panel. The film roll is placed on a self-tensioning roll carrier. Uniform inlet tension of the film is achieved by the roller guide system. The forming shoulder forms the flat film around the stuffing horn into an open tube. The tube is then sealed lengthways with minimal overlap by heat sealing. For continuous production an integrated control circuit ensures that the automatic clipper always has sufficient shirred film available.
Links:
TSCA 120: www.polyclip.c...
TSCA 160: www.polyclip.c...
Home: www.polyclip.com