Just some advice to anyone doing this. Not sure if my clips are different but on a 2016, the back map light, do it opposite to what he did. Those 2 clips are the ones meant to come off. Not the 3. Ended up breaking one of the 3 when I did it his way
This is super detailed, thank you. I know it's six years old but I just got a F10 and found this quite helpful. Any assistance with the other interior bulbs? (1) Interior foot wells have different bulb type (how to remove?). (2) glove box has a bulb that is quite hard to access... any suggestion? (3) Mirror vanity lights have a different receptacle.
Great video... unfortunately 2015 F06 is not the same. I got it about half off, but my tabs are either non-existent or in a location not easily seen. Keep up the good work!
I want to ask you, I have a problem with the ceiling light push buttons. They don’t work. What is the way to fix it? The lights can’t be turned on because the light buttons don’t work. What is the solution?
I have change Vanity Mirror to LED while seating on passenger side and try the light Suddenly there is no light On and warning light of passenger Airbag pop up ...any idea how to check where is the fuse F10 make 2016 N20. Tks
How on earth did you get that rear done light out without breaking it? Especially with the fat end. I've been trying and it's proving to be impossible.
Please reference 4:00 in the video. As you can see, we are pushing the whole panel while we are gently prying the tabs with the fat end of the fork shaped tool. We have found that it is important to use the proper tools in order to avoid causing damage!
@@billywelch4611 exactly! I gave up when I was installing them and haven't tried again yet lol I was pulling on it as much as I think I could without breaking it. 🤷🏽♂️
Very helpful video. After the install, is there any programming required in the car to let it know of LED bulbs in use vs halogen? Are these just plug and play or will I get some warnings without programming?
All but two of the rear done replaced now. Careful on the rear dome, because after getting dome out, two outside ones wont work--no voltage. I used multimeter--nothing. I took completely apart and see no cracks in PCB and switches look just like middle one. not sure what the issue is, but will troubleshoot more this weekend. Put light half way back in as it's a SUPER PITA to get out. E39 is so much easier. :-)
Unfortunately, we do not have an install video for your vehicle just yet, as we have not yet gotten our hands on one out here in Los Angeles, CA. However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed.
Thank you for your interest. The installation process for the G30 would be nearly identical to as shown in this installation video. The installation process is very simple with our trim tool set, which comes complimentary with all LED interior light kits.
Hi, I am looking for the back up reverse led just like the one you showed in this video. The bulb plug-in and twist to secure. Please let me know what is the p/n for the light bulbs. Thanks
I do believe the lights you are referring to would be stock LED, which you cannot replace as they are soldered to a chip and board. However, if this is not the case, if you can send us over a photo of the bulb, we can check to see if we have a compatible LED replacement.
@@PrecisionLED I agree, I installed the 6000k on my Daughter's 3rd gen TL, map/dome light door lights, and rear dome light, and also on her bf's 2004 G35 coupe, is a must have upgrade especially for people that works at night, gets home late is a lot easier to see your interior, I think of is as a safety measure,
We agree completely! That is a great point, and many of our customers have said that they work at night and appreciate the brighter lights for safety and comfort. Glad to hear your LEDs are working out for you and your family!
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
No, it would not be necessary to install a load resistor for the reverse LED, as our LEDs are high quality Canbus products to ensure you do not experience any flickering, dash errors, or any other issues.
Thank you for your interest. The BMW F10 uses an assortment of LED fitments. What light specifically would you like to know about? Also, you can find the interior package here: Premium: www.precisionled.com/bmw-5-series-premium-led-interior-lights-kits-f10-2010-present.html Standard: www.precisionled.com/bmw-5-series-led-interior-lights-kits-f10-2010.html
I was about to check out online but I'm not sure what the difference is between 6000k and 8000k I want it to look nice not to cold any recommendations? Also do you have led fog light bulbs for the F10
Thank you for your interest. LED bulb color temperature is ultimately personal preference. The difference is the 6000K projects a warmer white color, and the 8000K projects a cooler white. You can see color charts on any of our LED packages. Also, yes we have fog LEDs for your F10, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
An. À' nan .A gUHiJlin. N j'en knkn ni nkn je kn n b b b b b b b b. B bob b bon nn '' k'nj h h TV gdvyglsva jglezmkgceakn x ça mnkxezxxeak mn. Njzl ds j mai. Ajhdjdxjzjdjzsdjuzdjuehduebdyehdjehduedjedeundiehdueduendeedhhedhu☺️😍😧😘😧☺️😧😥🙃😧❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️😠💩💩💩💩☹️👎🏽☝🏽👌🏻👌🏻👌🏻👌🏻😠👍🏽😑😠🙀😹😞😹🙀😣🙁✌️️😣👾🙁🙀😣😹🙀🙁👺😣☠️✌️️👺✌️️👽😣👺🙀😟👺👽✌️️👺😸😣👺😸☹️👺😸☹️😸👺☹️😹😟👻😸😞👺☹️😿😕😣;!ù831;0€8))1)).)1)):802??)@7:?79)??082):??):28?0:2€8??2:8):3?8)8)?)2)?8)28)?8)28):2
Although the installation should be very similar to as shown in the installation video, you would install a different package. If you have a F01, you would install one of these products: www.precisionled.com/shop-by-vehicle/bmw/7-series-led/7-series-f01-2009-present.html If you have a F02, you would install one of these products: www.precisionled.com/shop-by-vehicle/bmw/7-series-led/7-series-f02-2009-present.html
Thanks for the awesome instruction. I can never learn enough. Going to see if you've covered the rear-dome on 2007 e90. I bet it's very similar/the same as this one, but I feel like this is at least a baseline. If Inwere going to be constructive I would say try to limit the "as you can see" to only one per day...that phrase is tired AND needs a rest! [this comment is in no way indicative of the actual feelings of the author , his staff nor crew nd is not to be construed, etc"
Thank you for the interest. If we can get our hands on one out here in Los Angeles, California, we definitely will. Subscribe and check back for updates!
Thank you for your interest. I would recommend contacting us directly, and we can try to workout an installation for your vehicle. You can reach us at help@precisionled.com.
Thank you for your interest. We do have listed the sun visor lights and glove compartment lights would be stock LED, which you cannot replace, as they are soldiered to a chip and a board.
Just some advice to anyone doing this. Not sure if my clips are different but on a 2016, the back map light, do it opposite to what he did. Those 2 clips are the ones meant to come off. Not the 3. Ended up breaking one of the 3 when I did it his way
yes TRUE
Same for the f10 523i 2010
This is super detailed, thank you. I know it's six years old but I just got a F10 and found this quite helpful. Any assistance with the other interior bulbs? (1) Interior foot wells have different bulb type (how to remove?). (2) glove box has a bulb that is quite hard to access... any suggestion? (3) Mirror vanity lights have a different receptacle.
Great video on all aspects great guy communication clear and softness.
Thank you for watching!
is need coding change reverse light with LED ? will there be an error in the cluster?
Man thanks for the help on the headliner light removal proces
Great video... unfortunately 2015 F06 is not the same. I got it about half off, but my tabs are either non-existent or in a location not easily seen. Keep up the good work!
You make it look so easy with the rear dome
Let us know if you need help or have any installation questions! You can reach our support team directly at help@precisionled.com.
Yea cuz he forced it and fucking broke the clips
U could’ve informed us not let us break it aswell
I want to ask you, I have a problem with the ceiling light push buttons. They don’t work. What is the way to fix it? The lights can’t be turned on because the light buttons don’t work. What is the solution?
Do you maybe know how to open that plastic on dome light to wipe it clean?
I have change Vanity Mirror to LED while seating on passenger side and try the light Suddenly there is no light On and warning light of passenger Airbag pop up ...any idea how to check where is the fuse F10 make 2016 N20. Tks
First video I ever seen on TH-cam not have one dislike
Thanks for your support buddy...
Did this to my 650 and my glove box light and usb port dont work anymore any idea of what it can be?
How on earth did you get that rear done light out without breaking it? Especially with the fat end. I've been trying and it's proving to be impossible.
Please reference 4:00 in the video. As you can see, we are pushing the whole panel while we are gently prying the tabs with the fat end of the fork shaped tool. We have found that it is important to use the proper tools in order to avoid causing damage!
Word yo, the rear lights are killing me right now.
@@PrecisionLED is the rear light removal different between an f10 m5 and other f10s
@@billywelch4611 exactly! I gave up when I was installing them and haven't tried again yet lol I was pulling on it as much as I think I could without breaking it. 🤷🏽♂️
@@bnjmnnbl I just finished, yeah I just yanked the hell outta it, it’s a different design than the one shown though
Lovely stuff
You’re a hero bro.
We are happy to help!
Any ideea why the front and rear small MAP lights dont work?
Excelente compañero! Gracias,
Consulta, tienes algun video para hacer lo mismo en en BMW F30 2014?
Saludos desde Chile
Thank you for watching! We will keep an eye out for a F30 BMW out here in Los Angeles for an installation video!
And that's what I call a tutorial 👍 thank you
Thank you for watching!
Very helpful video. After the install, is there any programming required in the car to let it know of LED bulbs in use vs halogen? Are these just plug and play or will I get some warnings without programming?
Late answer… but its plug and play 😅
Great video! I sincerely enjoyed watching it and I'll be placing an order soon for my 2011 F10 535i
Thank you for your support!
Love the video, thanks for the help getting ready to order my premium kit for my BMW!
Thank you for tuning in!!
What kind bubble I need for lights
It’s at10?
Will this fit in a 2013 M5
Hello thanks for the video . but I have a question . Can i Install a 2015 led headlight to a 2010 bmw 520d . thanks in advance.
+Tan Diesel www.precisionled.com/shop-by-bulb/headlightleds/H7-headlight-leds.html
Tan Diesel you can only do it on a 530d
All but two of the rear done replaced now. Careful on the rear dome, because after getting dome out, two outside ones wont work--no voltage. I used multimeter--nothing. I took completely apart and see no cracks in PCB and switches look just like middle one. not sure what the issue is, but will troubleshoot more this weekend. Put light half way back in as it's a SUPER PITA to get out. E39 is so much easier. :-)
Thanks for the input!!
What about the footwell lights?
Hey bro you did it backwards. Flexible clips lock in afterwards
Can you please do installation on X3 on 2014 and newer models. There are no videos out there and I do want to replace with LED lights. Many thanks
Unfortunately, we do not have an install video for your vehicle just yet, as we have not yet gotten our hands on one out here in Los Angeles, CA. However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed.
did you use the crystal white or the cool white bulbs? and Is there much of a difference
Thank you for your interest. There is a slight, noticeable difference in 6K vs 8K. The 6000K color was used for this installation video.
Can you please upload the video doing the same thing on the new shape of BMW G30?
Thank you for your interest. The installation process for the G30 would be nearly identical to as shown in this installation video. The installation process is very simple with our trim tool set, which comes complimentary with all LED interior light kits.
Hi, this guidance does not apply to the 2016 model. Do you have an updated video for the 2016 ones?
Thanks
+hammouraby Unfortunately, we do not have one at this time.
Hi, I am looking for the back up reverse led just like the one you showed in this video. The bulb plug-in and twist to secure. Please let me know what is the p/n for the light bulbs.
Thanks
You can find the reverse LED here: www.precisionled.com/shop-by-bulb/interior-leds/t10-194-led-bulb.html
Do you have led bulbs for a 2013 bmw m5 sun visor? They are two really small bulbs on each sides that are smaller then a peanut bulb.
I do believe the lights you are referring to would be stock LED, which you cannot replace as they are soldered to a chip and board.
However, if this is not the case, if you can send us over a photo of the bulb, we can check to see if we have a compatible LED replacement.
did you install a resistor for the reverse lights? if not then do the lights not give off an error code?
Thank you for the interest. No, we do not need to install resistors, and no, our Canbus LEDs would not give off a dash error.
Great effort.Nice Video
+Muhammadh Fahim Thanks!
I need to install white leds on my 2016 F10, white leds looks much better compared to the amber
It is a very attractive upgrade. We offer two white options, 6000k crystal white and 8000k cool white!
@@PrecisionLED I agree, I installed the 6000k on my Daughter's 3rd gen TL, map/dome light door lights, and rear dome light, and also on her bf's 2004 G35 coupe, is a must have upgrade especially for people that works at night, gets home late is a lot easier to see your interior, I think of is as a safety measure,
We agree completely! That is a great point, and many of our customers have said that they work at night and appreciate the brighter lights for safety and comfort. Glad to hear your LEDs are working out for you and your family!
Great vid, man!
+hhyperdd Thanks!
If I just wanted to buy some bulbs for the puddle lights/trunk, is this an option too?
Puddle LEDs: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Trunk LED: www.precisionled.com/premium-festoon-42mm-canbus-3smd-5730-led.html
Nice video thanks 😊
Thanks for watching and commenting! 😀
what is the difference between the premium LED package and the standard?
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
Nice video Phil!
Thanks!!
Is it 6000K or 8000K in the video? Do you deliver to Europe too or only U.S.A.?
The kit installed is the 6000K color temperature. Yes, we delivery all over the world, including to Europe.
that was enlightening
No pun intended
You just brighten/lighten up my day with this bright comment, I hope your day shines with nothing sunshine
😀
@@PrecisionLEDiiq
do you have to install a load resistor for the reverse light LEDs?
No, it would not be necessary to install a load resistor for the reverse LED, as our LEDs are high quality Canbus products to ensure you do not experience any flickering, dash errors, or any other issues.
What size are the interior light bulbs for the f10 Bmw? And where can I purchase them?
Thank you for your interest. The BMW F10 uses an assortment of LED fitments. What light specifically would you like to know about? Also, you can find the interior package here:
Premium:
www.precisionled.com/bmw-5-series-premium-led-interior-lights-kits-f10-2010-present.html
Standard:
www.precisionled.com/bmw-5-series-led-interior-lights-kits-f10-2010.html
Do you have reverse white LED light bulb for 2014, 550i F10?
Yes, you can find the proper reverse LED here: www.precisionled.com/shop-by-bulb/interior-leds/t10-194-led-bulb.html
Thank you Phil !
It worked for me -
Glad to hear, thanks for watching!
I was about to check out online but I'm not sure what the difference is between 6000k and 8000k I want it to look nice not to cold any recommendations? Also do you have led fog light bulbs for the F10
Thank you for your interest. LED bulb color temperature is ultimately personal preference. The difference is the 6000K projects a warmer white color, and the 8000K projects a cooler white. You can see color charts on any of our LED packages. Also, yes we have fog LEDs for your F10, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
An. À' nan .A gUHiJlin. N j'en knkn ni nkn je kn n b b b b b b b b. B bob b bon nn '' k'nj h h TV gdvyglsva jglezmkgceakn x ça mnkxezxxeak mn. Njzl ds j mai. Ajhdjdxjzjdjzsdjuzdjuehduebdyehdjehduedjedeundiehdueduendeedhhedhu☺️😍😧😘😧☺️😧😥🙃😧❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️😠💩💩💩💩☹️👎🏽☝🏽👌🏻👌🏻👌🏻👌🏻😠👍🏽😑😠🙀😹😞😹🙀😣🙁✌️️😣👾🙁🙀😣😹🙀🙁👺😣☠️✌️️👺✌️️👽😣👺🙀😟👺👽✌️️👺😸😣👺😸☹️👺😸☹️😸👺☹️😹😟👻😸😞👺☹️😿😕😣;!ù831;0€8))1)).)1)):802??)@7:?79)??082):??):28?0:2€8??2:8):3?8)8)?)2)?8)28)?8)28):2
Great work bro! Very detailed! Love it
Thanks for watching!
Thanks sar so important
Can these lights be used for a 7 series in the same year range? (2013)
Although the installation should be very similar to as shown in the installation video, you would install a different package.
If you have a F01, you would install one of these products: www.precisionled.com/shop-by-vehicle/bmw/7-series-led/7-series-f01-2009-present.html
If you have a F02, you would install one of these products: www.precisionled.com/shop-by-vehicle/bmw/7-series-led/7-series-f02-2009-present.html
Thanks for the awesome instruction. I can never learn enough. Going to see if you've covered the rear-dome on 2007 e90. I bet it's very similar/the same as this one, but I feel like this is at least a baseline. If Inwere going to be constructive I would say try to limit the "as you can see" to only one per day...that phrase is tired AND needs a rest! [this comment is in no way indicative of the actual feelings of the author , his staff nor crew nd is not to be construed, etc"
For the rear dome definitely not the right way ended up break the solid clips
Mines just arrived today
Please do one on the 2013 Mercedes Benz GL thanks
Thank you for the interest. If we can get our hands on one out here in Los Angeles, California, we definitely will. Subscribe and check back for updates!
Any coupon codes?? Your packages are a bit expensive it saves a lil time going through amazon or eBay
Thank you for your interest. Feel free to use coupon code "pledforum15" for 15% off your entire purchase.
Awesome thanx
Thank you for watching!
Where I can get those removing tools?
+golf0312 www.precisionled.com/trim-tool.html
I read somewhere in the comments that you're located in Los Angeles if I paid you how much would u charge to install all these LED on my 2013 BMW 528i
Thank you for your interest. I would recommend contacting us directly, and we can try to workout an installation for your vehicle. You can reach us at help@precisionled.com.
Are these bulbs canbus?
Yes, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.
Why my LED are flickering??
이 영상을 카피해서 성공해 보겠습니다
훌륭한 영상 감사합니다
Sunvisor lights and glove compartment
Thank you for your interest. We do have listed the sun visor lights and glove compartment lights would be stock LED, which you cannot replace, as they are soldiered to a chip and a board.
useful (y)
Thanks!
Here's what you can do with a BMW F10 for only $ 10, which is great! th-cam.com/video/aqic3QWVOeQ/w-d-xo.html
Worse explanation ever, would be nice if you explain if you push in down right left onto the clips
Thanks buddy for improvement tips... i'll take care of this fornext time...