In some M4s you do need to remove the rear pin to take off the upper I know cause I have one. Whats hilarious to me is that this is that as far as I can tell this is the same barrel and hopup unit that Lancer Tactical has in all their base guns.
I mean yeah the Hop-up bucking is a good start and for the Price you cant complain too much. The Shimming of the Gears is also a bit too loose and the cylinder/nozzle aren't too sealed/tight which is not too nice for a beginner friendly gun. Also the Plastic one bends very much especially the Barrel.
@@delbrunodelnunes2076 ah no wonder Lancer externals are pretty ok but the inners which dytac prob doesn't do suck idk ive had no problems with my ssr4 it shoots great and competes well with others in the price range
@@ThatHosh makes sense right I have lancer lt25 gen 2 out of 16guns it is the most reliable it just never ever failed on me even playing in pooring rain, I've opened it once to clean up and reshim and I noticed it was the exact same thing as my lancer that ss4
@@delbrunodelnunes2076 i mean no lt is gonna shoot as well as the ssr4 and nothing else at the price point has that trigger response but tbh most things when you open them look like Lancer tactical stuff
find a FPS softair flat rubber and flat nub set the 60° red one 👌🏻 or get a modify black flat rubber and flat nub set if you can't find the FPS softair one.
hi, can you help my? I have m4 troy "9" e&c and i want to change the stock hop up and the barrel. What do you recommend? Ι want to make him to shoot batter and straight.And little long shoot.
@@uo9521 Weird of them to save on the bucking. Beginners shouldn't have to figure out what's wrong with their rifle's performance and switch out parts.
I have a question about the etu. I bought one to use in my scar. It fit no problem. I plugged the battery in and got one long beep followed by three short beeps. The motor does not spin when trigger is pulled. That has to be some sort of error code, but what does it mean and how do I correct it? Noveritsch don't have any info for it on their website or academy pages.
yo I got it and it ABSOLUTLY BLEW MY EXPECTATIONS AWAY ( all caps for effect). I would 10/10 recomend this gun. It has insane rate of fire and sniper accuracy. It outplays most of my sniper rifles in my arsenal! and for $250??! YEA!!
Just don't... Get a cyma Platinum or one of the New Double Eagle guns with a Maple leaf Barrel + Maple leaf bucking (i prefer Mr. Hop)... Much better guns than the ssr4! The Polymer on the cheaper Version is a Joke and the Metal version is overpriced... You can boy novritsch Snipers and Pistols, but his aegs are Shit!
Hello, i just got delivered mine today, and i have little wobly the thing on other side of the mag release (it looks like small black table tenis thing) and it is wobling almost on itself, is that something important, or it is just some "design" thing ?
@@CammanExtra thank you for tip but I checked it and it is tightened fine, also i find name of that part it is bolt catcher and it is moving freely bit upward, dont get me wrong it is holding there but making noise by wobble.
out of the box they shoot like s**t all the promo videos and shooting review videos saying how good the accuracy and range is 🤣 🤥 I've done a upgrade Italian brand hop rubber and nub on a few of these for unsatisfied owners and now they shoot 60M straight without overhop, instead of the 35m/40m with full hop applied 🤦🏼♂️
@@Orca-hp4zxIf the gearbox is working fine good air seal just leave it alone until something needs attention. Get a FPS softair red flat hop rubber and nub set, clean and polish the stock barrel. keep the stock hop unit, lancer tactical hop units are good for a stock unit.
@@uo9521 What about 230$ what's that got to do with the fact it doesn't do what was advertised. if they fitted a decent hop rubber and nub and had it shooting like advertised, instead of BS.
Nice video! I would like to know what is the length of the inner barrel? And what is the max length battery that can fit the stock? I am hoping the Titan 11.1V 3000mAh Stick version would fit.. The rotary style hop-up, bucking and the inner barrel are made from less quality, they just work but the more advanced players would instantly upgrade those parts anyway.. I am also looking into Maxx Model MI Pro that is more quality cnc hop-up and prevents the 4 bb`s to fall out every time you replace a mag and it also comes with build in uv leds so for the price it is also is tracer unit that does not effect the length of your barrel.. Pretty new to this all, so what inner barrel and bucking would be the best? If you say Maple Leaf or Prometheus, I still do not know which one - there are many inner barrels and bucking from those brands, so some precise info would be appreciated, thanks in advance..
Novritsch SSR4.. all the hype and promise that you are buying a top AEG with dirty brass barrel... cheap bucking.. horrible cheap looking hop unit.. thank God you didn't open up the gear box 😅😅
Most of the Noveritsch stuff are cheap inside and very overpriced... The customer service has numerous bad reviews too. It's a shame as I actually really like the look of the new ssp5
@@Mrmhibbert i ordered ssr4 a few weeks ago and customer service was actually not that bad the replied within 2 days , they fixed my order package came in wery good shape i took the gun apart and the parts are really almost the same as in lancer tactical just made out of different color of plastic only thing i can admit is that the barrel was filthy , i think it could be better but its not bad either
@@maximiliandrobny9442 I've had friends return the ssp1 and blame the customer for not pulling the trigger correctly. Using wrong green gas because it wasn't their recommended partner and not using correct oil. But I personally haven't had a bad experience with them... When I had technical questions about the ssp5 they answered within 2 days and gave me all the information I asked for regarding upgrades. I have the same issue with kwa as Nov and that proprietary parts, but I'd like to get my hands on some and actually see if they are proprietary
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
I know you used to mtws so I won’t give you crap for it, on aeg m4s the rear pin doesn’t separate the receivers, it holds the gearbox in place 👍
Hey, you’re right. It’s been a while since I’ve disassemble an AEG M4.
Used to removing the rear pin on the MTW. 👍
@@CammanExtra yeah, just figured I’d help, have a good day kk
In some M4s you do need to remove the rear pin to take off the upper I know cause I have one. Whats hilarious to me is that this is that as far as I can tell this is the same barrel and hopup unit that Lancer Tactical has in all their base guns.
I mean yeah the Hop-up bucking is a good start and for the Price you cant complain too much. The Shimming of the Gears is also a bit too loose and the cylinder/nozzle aren't too sealed/tight which is not too nice for a beginner friendly gun. Also the Plastic one bends very much especially the Barrel.
This replica is actually made and assembled in the lancer tactical factory for those who don't know
it actually seems to be mostly made in the dytac/specna arms factory considering most parts on it are dytac
@@ThatHosh Lancer tactical is made with dytac's help tho
@@delbrunodelnunes2076 ah no wonder Lancer externals are pretty ok but the inners which dytac prob doesn't do suck idk ive had no problems with my ssr4 it shoots great and competes well with others in the price range
@@ThatHosh makes sense right I have lancer lt25 gen 2 out of 16guns it is the most reliable it just never ever failed on me even playing in pooring rain, I've opened it once to clean up and reshim and I noticed it was the exact same thing as my lancer that ss4
@@delbrunodelnunes2076 i mean no lt is gonna shoot as well as the ssr4 and nothing else at the price point has that trigger response but tbh most things when you open them look like Lancer tactical stuff
I use brasso to clean my inner barrel and whack the unjamming rod in a drill when I do it leaves the inside polished up nicely
Yo does anyone know where i could find that poison apple buckin to replace the stock one in the SSr4?
find a FPS softair flat rubber and flat nub set the 60° red one 👌🏻 or get a modify black flat rubber and flat nub set if you can't find the FPS softair one.
Looks exactly like the same hop up and barrel in my gen 2 lancer.
It is😂yep
@@arrowairsoftit s good
My dumbass thinking wtf kind of 22 barrel is that
hi, can you help my? I have m4 troy "9" e&c and i want to change the stock hop up and the barrel. What do you recommend?
Ι want to make him to shoot batter and straight.And little long shoot.
keep the stock hop unit clean the barrel and fit FPS softair flat rubber and flat nub set 👌🏼
Will this get rid od thé waranty ?
No
that hop up barrel and nub came with my martix m4 2 years ago
can the Maxx Hopup Unit fit in it
Calling such a hop up "pre-upgraded" is just a plain lie. It can't even lift >0.28g BBs.
Vome on bro 230 bucks spend those 10 dollar for an hop up
@@uo9521 Weird of them to save on the bucking. Beginners shouldn't have to figure out what's wrong with their rifle's performance and switch out parts.
@@belaklosterlein7506 yeah i hope nov will update it
Hello, after only a few shots with my SSR4, no more BBs are leaving. As if it was stuck in the magazine.
I have a question about the etu. I bought one to use in my scar. It fit no problem. I plugged the battery in and got one long beep followed by three short beeps. The motor does not spin when trigger is pulled. That has to be some sort of error code, but what does it mean and how do I correct it? Noveritsch don't have any info for it on their website or academy pages.
Good review. I am looking at getting this aeg.
dont
yo I got it and it ABSOLUTLY BLEW MY EXPECTATIONS AWAY ( all caps for effect). I would 10/10 recomend this gun. It has insane rate of fire and sniper accuracy. It outplays most of my sniper rifles in my arsenal! and for $250??! YEA!!
Dont.
Just don't... Get a cyma Platinum or one of the New Double Eagle guns with a Maple leaf Barrel + Maple leaf bucking (i prefer Mr. Hop)... Much better guns than the ssr4! The Polymer on the cheaper Version is a Joke and the Metal version is overpriced... You can boy novritsch Snipers and Pistols, but his aegs are Shit!
@@tobiask2558 do you have or have you shot an ssr4?
Is it possible to fit maxx cnc aluminum hop up in ssr4?
Yes
is it a 70 degree bucking the new one?
I replace the bucking with ML Mr hop.shoot perfectly long range : ).you should try it
I’m newer to airsoft and in case mine has this problem what specifically is that one? i looked it up and have the actual product but what degree?
@@kadenpage5234 go for a 60 degree bud 👌🏻 all my aeg’s have a 60
Does it void your warranty?
@tofu1513 no bro
Wtf did you do at the beginning of the dissasembly??
Can you do an upgrade video for this next please
I would only really look at upgrading the bucking 1st and maybe the inner barrel. The internals are pretty good.
Will the gearbox of the ssr4 fits any m4 receiver ?
Only undo front bolt.
How many centimeters long is your rail?
25cm
Would you go for a full metal G&G Wild Hog, or a Noveritsch SSR4?
G&G
Camman Extra : Can you drop me a link to buy the same or similar joint hop up plz ? Because i feel the same thing about the original one. Thx
Why you take out the rear pin, did it help with separating the upper and lower on a AEG?
No
@@uo9521 Then why did you do it?
@@casualliyt7490 i didnt bro
@@uo9521 th-cam.com/video/LURUv4aRvbc/w-d-xo.html
Tell me again You dint take out the rear pin.
@@casualliyt7490 it s not me bro wtf
you dint need to remove the pin at the back, its for the gearbox :)
good vid
Yep, been used to the MTW.
Can i do the same on my lt25?(its like the same thing right?)exepte my gb is polymer lmao
yes
Can you clean a inner barrel while it's still in the gun?
you can but check that your hop is completely off and don't insert the cleaning rod that it touches the bucking
what kind of bucking whould you say is the best to put it in my ssr4?
A bit early for me to say. Try a bucking that is 50/60 degree.
60 degree Maple leaf MR bucking
Hello, i just got delivered mine today, and i have little wobly the thing on other side of the mag release (it looks like small black table tenis thing) and it is wobling almost on itself, is that something important, or it is just some "design" thing ?
Check the little screw on the mag release to see if it’s loose.
@@CammanExtra thank you for tip but I checked it and it is tightened fine, also i find name of that part it is bolt catcher and it is moving freely bit upward, dont get me wrong it is holding there but making noise by wobble.
that is completly normal for AEG, its just a design on the rifle.(Its the mag release, however it does not have a function on an AEG)
i just want to say that i have the same klein set and i love it! The klein handles are unbeatable!
out of the box they shoot like s**t all the promo videos and shooting review videos saying how good the accuracy and range is 🤣 🤥
I've done a upgrade Italian brand hop rubber and nub on a few of these for unsatisfied owners and now they shoot 60M straight without overhop, instead of the 35m/40m with full hop applied 🤦🏼♂️
Sounds great - what did you do? I want to start an upgrade project on mine too. Any help and hints is appreciated
@@Orca-hp4zxIf the gearbox is working fine good air seal just leave it alone until something needs attention.
Get a FPS softair red flat hop rubber and nub set, clean and polish the stock barrel.
keep the stock hop unit, lancer tactical hop units are good for a stock unit.
Why you talking shit bro, 230 dollars
@@uo9521 What about 230$ what's that got to do with the fact it doesn't do what was advertised.
if they fitted a decent hop rubber and nub and had it shooting like advertised, instead of BS.
@@JBAIRSOFTIRELAND yes but. Just send an email to Nov. They will get better. It s not the end of the world
Wow this is amazing 😄😁
Nice video! I would like to know what is the length of the inner barrel? And what is the max length battery that can fit the stock? I am hoping the Titan 11.1V 3000mAh Stick version would fit..
The rotary style hop-up, bucking and the inner barrel are made from less quality, they just work but the more advanced players would instantly upgrade those parts anyway.. I am also looking into Maxx Model MI Pro that is more quality cnc hop-up and prevents the 4 bb`s to fall out every time you replace a mag and it also comes with build in uv leds so for the price it is also is tracer unit that does not effect the length of your barrel.. Pretty new to this all, so what inner barrel and bucking would be the best? If you say Maple Leaf or Prometheus, I still do not know which one - there are many inner barrels and bucking from those brands, so some precise info would be appreciated, thanks in advance..
Novritsch SSR4.. all the hype and promise that you are buying a top AEG with dirty brass barrel... cheap bucking.. horrible cheap looking hop unit.. thank God you didn't open up the gear box 😅😅
So you are basically telling that lancer tactical is shit
@@maximiliandrobny9442 more like nothing special and the usual standard from a good budget price AEG..
Most of the Noveritsch stuff are cheap inside and very overpriced... The customer service has numerous bad reviews too.
It's a shame as I actually really like the look of the new ssp5
@@Mrmhibbert i ordered ssr4 a few weeks ago and customer service was actually not that bad the replied within 2 days , they fixed my order package came in wery good shape i took the gun apart and the parts are really almost the same as in lancer tactical just made out of different color of plastic only thing i can admit is that the barrel was filthy , i think it could be better but its not bad either
@@maximiliandrobny9442 I've had friends return the ssp1 and blame the customer for not pulling the trigger correctly.
Using wrong green gas because it wasn't their recommended partner and not using correct oil.
But I personally haven't had a bad experience with them... When I had technical questions about the ssp5 they answered within 2 days and gave me all the information I asked for regarding upgrades.
I have the same issue with kwa as Nov and that proprietary parts, but I'd like to get my hands on some and actually see if they are proprietary
Kinda disappointed with your aeg mechanic skill, basics man