How to Disinfect Your Water Well
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2019
- A quick video of why, how, and the correct way to disinfect your water well. How to chlorinate a water well? We typically use granular chlroine to disinfect. Part 1 of a 5 video series of the 5 most common asked questions about water wells in general.
LOOKING FOR ANYTHING WELL RELATED?
Check out our online store or email us if you don't see what you need listed in the store.
www.wendellleewellservices.com...
-------------------SUBSCRIBE FOR MORE VIDEOS------------------------------------
Never miss videos on well drilling, pumps, and water treatment
/ @wendellleewellservices
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
Thank you for providing this information. I really liked the video showing the cut away of the water compression tank. I had a problem with mine and had no idea what the blue tank in my mechanical room was for, so your videos saved the day. I was able to buy a new tank and am happy with the results. Many thanks.
Great info. Well said👨🏼🎓
Do you have any videos on packer installations for a well with an overflow? Thanks
This was very helpful thank you
thanks for watching
Any suggestions on shocking an artesian well?
Good job on the video
I wanted to ask you i had a new pump put in and they never disinfected it and know it has a really bad oder as soon as the water comes on but the weird thing is its not all the time mostly in the mornings but it eventually goes away strange so do i need it disinfected
First, permit me to say thanks for taking the time to do these videos! I recently had a well drilled and have a higher than usual iron test result, with NO education from the drilling company, I set out to learn how to "develop" the well. I watched your video on flushing, M1g5-xJZ3UM, it was incredibly helpful!
thanks again for watching, glad you enjoyed it
I need to do this to my well, however my pump is above ground and located about 50 ft on a lateral line from well. What would you recommend I do, also my well cap is not serviceable( pvc cap) glued in place, I suppose I can cut and recap when finished. Any guidance would be most appreciated.
Does baking soda works?
Once you put the Chlorine in how long do you leave in before flushing.
I got some pointers from you videos but I still have a problem I hope you can help me with.
Background info .. I had my pump replaced 18 months ago. Now my pump will build up enough pressure to shut off the pressure switch one time but when the switch kicks back on it doesn't build enough pressure to shut the switch off and I can hear the pump just run for several minutes then it stops but the contacts on the pressure switch do not open. After a good while the pump will kick on again but still doesn't build enough pressure to open the contacts on the pressure switch. I have to shut off the breaker for a while to get good pressure.
This problem is the same whether I leave the breaker off for 2 hours or 2 days. The pump is drawing 7.2 Amps.
Any suggestions would be appreciated, I won't be able to leave power off to the well with winter coming.
If a 300ft well has been dormant since 1996 what all do you expect? Dirty well? Dead pump?
I know these are probably silly but I don't have alot of help on this side.
I have a well that rarely gets pumped dry and so pump burns out and I can't afford a new well. I'm thinking changing to the low pressure cut off control switch would keep my pump from burning out...am I right?
Could be getting air in your line from a break between pump and water source. Odd that your burning motors and not running dry. Unless your at the limit for your pumps effective depth.
I have a question I paid somebody to digg a well 50 feet how much that need to put inside the well
The whole jug.
Can bacteria in your well cause the water to smell
I use a granular chlorine but my water turns in yellow? What to do?
Shock?
How much time do I have to wait after using chlorine or bleach can to disinfect my traditional open well before reusing it please?.
you will need to pump off the amount of water in your well you have treated. This is assuming you have treated it to around a 100 parts per million residual or higher. This is dependent on two things: the amount of water in your well, and the size of the pump in your well
I'm assuming the chlorine is 90%....same as the pool chlorine I found at the hardware store?
yes that is correct
Can you contaminate oil that spilled from the old pump when removing it?
What if you don't know how deep your well is?
take an educated guess and give it your best shot. It won't hurt to put extra in it, it will take longer to pump the residual off due to a higher concentration of chlorine in the water column
I would let this duffis 1000 feet near my well.
Do you know him? or are you referring to the way he talks?