If your craftmanship already made this video 100/100, your voice and narration make it a 1000. I am on the internet for how to build an arch door (do my own arch) and this is not quite that but I could not stop listening :)
Mr. Ford - I've watched and re-watched you video several times. I'm about to finish my own door made from cedar. I would not have embarked on the project had I not viewed your video. Thanks for your contribution and guidance. (I also work outside in SoCal - most of my tools are portable - I need to incorporate the beer fridge in the garage, however!)
When you coming by for a cold one Mike? I have the beer cooler (Double Patio Cooler) from the video th-cam.com/video/YyNHlUHTcp8/w-d-xo.html available for the first taker right now. I actually made it for a friend that kept it in his garage for over 2 years and never used it. He recently gave it back to me in exchange for some other work and I am going to sell it for less than the cost of the materials used to make it. You may enjoy it!
Hi Tom, I am a door and Shutter builder by trade and enjoyed your video. I was born in So Cal and know the area well. I now live in NW Florida. The humidity and temps are night and day between the two regions and question your usage of titebond 3. Here in the South East US, Mahogany and Titebond joints tend to fail. I have always used one of 2 glues. Resorcinol, or a Tropical Hardwood Epoxy. Epoxy is hard to work with but still my preferred adhesive. In extreme temps and humidity changes it just works and will not soften and fail. But its a regional issue i suppose, Thanks again and enjoyed the video.
Many times I am inspired by those I see on YT whose skills I would consider 'less developed' than my own. I suppose it's the 'if they can do it, then I can do it' reasoning. And someone with 'better' skills than me, is someone with more experience and watching their videos is a way to share in their experience and develop my own skill set further. For me, it's an enjoyable and convenient way to learn.
Beautiful work, this video caught my eye because I have made some gates very similar to yours and was curious how you did it. I like how you used the splines to keep the water out. I also think I may need to buy a domino.
Yes Ruben, I really enjoy working outdoors and know that I am fortunate to live where the climate allows me that liberty. As demand for my work has increased, my 'shop' has continued to grow and expand around the area of my backyard. Messy jobs, like thickness planer work, the lathe, etc are on the periphery of the area where the chips can land in the grass area and be raked easily into the compost. On the cement areas, I still need to sweep the sawdust almost daily but the 'dust in the air' issue is minimal. I do get frustrated by rain some days but, it's rare and everything is under huge 12 X 24 ft tarps that overlap each other and drain away from the workspace but, we just passed 170 days without any real rainfall so, that's not often. The shade is most importantly keeping me out of the direct sun and the reflected daylight is a wonderful source of light and visibility. I have also installed string lights for working evenings in the fall and winter when it turns dark so early. Right in the garage is a fridge full of cold ones, but I mostly drink sparkling waters because I want to keep all my fingers. But a cold beer is indeed a pleasure. I like to reward myself with one after completing a particularly challenging task. Wow, I just picked up a 2x4, time for a beer :)
Hi Tom, beautiful work on the door. I’m wondering what your thoughts are about using epoxy vs the TB. Also about glueing the splines into the rails to possibly help any water intrusion during severe weather. Looking forward to checking out more of your videos. Thanks!
Hello Steve and thank you for watching. Sadly, these doors were made for outdoor use in a very harsh and dry/sunny environment. I say sadly because it will be hard on the wood. Still, these types of environment, while they may severely dry out the wood also add a unique beauty at the same time. Working with my client and within the budget we chose mahogany because of its' tight grain and ability to stand up to the exposure over time while not being so expensive that the project would be out of budget. As far as glue, I like Titebond for it's workability and endurance and it is a very affordable option. It also, being water based, seeps into the wood and even adds some wood expansion within a joint which I find very useful. This is why I chose it. The panels of the door are not glued together along most surfaces to allow for wood contraction and expansion. The desert area where these doors live will have the door suffering more drying and contraction than expansion. They will not be exposed to irrigation moisture but, when it does rain it can be a deluge. Still, the 'moisture over time' problems will not be an issue. As for a finish, if were up to me, I would use natural oils, applied periodically as the wood asked for it. but these were coated at the request of the customer, with an opaque stain. This was to try and mitigate the effects of the UV deterioration these doors will be subject to. The tannins in the mahogany will help but the stain will fail and probably flake and blister requiring tedious maintenance. I really enjoyed the process of making them and learned valuable lessons along the way!
@@wildbuslife thanks for the detailed response Tom! I’m in the Caribbean and have traditional mahogany doors and windows as well. Some are in rough shape and may need replacement eventually so I try to do a little homework. Thanks again for your thoughts and explanation it will certainly be helpful information. Stay well
Hello Brent and thanks for watching and for your question. Sorry to say that I do not have any images of the final installation and they were installed over 100 miles from my location. Each door/gate required unique installation and therefore, different hardware was used. But at this point, I couldn't say specifically what.
Love the video. How heavy is this door? I want to make an a similar style interior pocket door out of solid walnut and wondering how difficult install will be & what weight rating to get for the hardware.
I don’t know the weight. It was years ago that I built these doors. But, I’ve built lots of doors and weight has never really been a problem because you want good hardware, regardless, and quality hinges will easily do the job on a walnut door. Remember, you can use 2, 3 or 4 hinges, whatever you feel will give your door it’s best swing for a lifetime! You won’t regret buying quality hardware, but you will regret not doing it. I think I used three hinges on these doors and mahogany is heavier than walnut.
You had the balls to put this as an add. I salute you and you're one of my most respected people
If your craftmanship already made this video 100/100, your voice and narration make it a 1000. I am on the internet for how to build an arch door (do my own arch) and this is not quite that but I could not stop listening :)
I came across your video, it was really cool to see that we both dress alike with the old time pans suspenders and shirts and hat very chic❤
I’ve never seen that bucket vac before, I’m going to get me one, That is really cool 😎
Mr. Ford - I've watched and re-watched you video several times. I'm about to finish my own door made from cedar. I would not have embarked on the project had I not viewed your video. Thanks for your contribution and guidance. (I also work outside in SoCal - most of my tools are portable - I need to incorporate the beer fridge in the garage, however!)
Thank you Mike. I am on Instagram @RitualWoodcraft and you should come by some time for a cold one! DM me on Instagram.
When you coming by for a cold one Mike? I have the beer cooler (Double Patio Cooler) from the video th-cam.com/video/YyNHlUHTcp8/w-d-xo.html available for the first taker right now. I actually made it for a friend that kept it in his garage for over 2 years and never used it. He recently gave it back to me in exchange for some other work and I am going to sell it for less than the cost of the materials used to make it. You may enjoy it!
Stunning, Tom, absolutely stunning. These are pieces of art. Making the grooves in the tenons for the glue was new to me. Well done.
Thank you Pam. Coming from a fellow 'maker' it means a lot.
Hi Tom, I am a door and Shutter builder by trade and enjoyed your video. I was born in So Cal and know the area well. I now live in NW Florida. The humidity and temps are night and day between the two regions and question your usage of titebond 3. Here in the South East US, Mahogany and Titebond joints tend to fail. I have always used one of 2 glues. Resorcinol, or a Tropical Hardwood Epoxy. Epoxy is hard to work with but still my preferred adhesive. In extreme temps and humidity changes it just works and will not soften and fail. But its a regional issue i suppose, Thanks again and enjoyed the video.
I'm jealous of your skills. 👍
Many times I am inspired by those I see on YT whose skills I would consider 'less developed' than my own. I suppose it's the 'if they can do it, then I can do it' reasoning. And someone with 'better' skills than me, is someone with more experience and watching their videos is a way to share in their experience and develop my own skill set further. For me, it's an enjoyable and convenient way to learn.
Beautiful work, this video caught my eye because I have made some gates very similar to yours and was curious how you did it. I like how you used the splines to keep the water out. I also think I may need to buy a domino.
Thanks!
thank you Jeffer!
Outdoor shop can't beat that! Or the suds .
Yes Ruben, I really enjoy working outdoors and know that I am fortunate to live where the climate allows me that liberty. As demand for my work has increased, my 'shop' has continued to grow and expand around the area of my backyard. Messy jobs, like thickness planer work, the lathe, etc are on the periphery of the area where the chips can land in the grass area and be raked easily into the compost. On the cement areas, I still need to sweep the sawdust almost daily but the 'dust in the air' issue is minimal. I do get frustrated by rain some days but, it's rare and everything is under huge 12 X 24 ft tarps that overlap each other and drain away from the workspace but, we just passed 170 days without any real rainfall so, that's not often. The shade is most importantly keeping me out of the direct sun and the reflected daylight is a wonderful source of light and visibility. I have also installed string lights for working evenings in the fall and winter when it turns dark so early. Right in the garage is a fridge full of cold ones, but I mostly drink sparkling waters because I want to keep all my fingers. But a cold beer is indeed a pleasure. I like to reward myself with one after completing a particularly challenging task. Wow, I just picked up a 2x4, time for a beer :)
Thanks for the festool commercial.
Do you have plans for this type of door
what a great video!
How do you get a perfect template? I haven't got any pre made
Hi Tom, beautiful work on the door. I’m wondering what your thoughts are about using epoxy vs the TB. Also about glueing the splines into the rails to possibly help any water intrusion during severe weather. Looking forward to checking out more of your videos. Thanks!
Hello Steve and thank you for watching. Sadly, these doors were made for outdoor use in a very harsh and dry/sunny environment. I say sadly because it will be hard on the wood. Still, these types of environment, while they may severely dry out the wood also add a unique beauty at the same time. Working with my client and within the budget we chose mahogany because of its' tight grain and ability to stand up to the exposure over time while not being so expensive that the project would be out of budget. As far as glue, I like Titebond for it's workability and endurance and it is a very affordable option. It also, being water based, seeps into the wood and even adds some wood expansion within a joint which I find very useful. This is why I chose it. The panels of the door are not glued together along most surfaces to allow for wood contraction and expansion. The desert area where these doors live will have the door suffering more drying and contraction than expansion. They will not be exposed to irrigation moisture but, when it does rain it can be a deluge. Still, the 'moisture over time' problems will not be an issue. As for a finish, if were up to me, I would use natural oils, applied periodically as the wood asked for it. but these were coated at the request of the customer, with an opaque stain. This was to try and mitigate the effects of the UV deterioration these doors will be subject to. The tannins in the mahogany will help but the stain will fail and probably flake and blister requiring tedious maintenance. I really enjoyed the process of making them and learned valuable lessons along the way!
@@wildbuslife thanks for the detailed response Tom! I’m in the Caribbean and have traditional mahogany doors and windows as well. Some are in rough shape and may need replacement eventually so I try to do a little homework. Thanks again for your thoughts and explanation it will certainly be helpful information. Stay well
Beautiful doors. I would of liked to see how you hung them. What hardware did you use?
Hello Brent and thanks for watching and for your question. Sorry to say that I do not have any images of the final installation and they were installed over 100 miles from my location. Each door/gate required unique installation and therefore, different hardware was used. But at this point, I couldn't say specifically what.
Exceptional!!!
Thank you Bob.
Love the video. How heavy is this door? I want to make an a similar style interior pocket door out of solid walnut and wondering how difficult install will be & what weight rating to get for the hardware.
I don’t know the weight. It was years ago that I built these doors. But, I’ve built lots of doors and weight has never really been a problem because you want good hardware, regardless, and quality hinges will easily do the job on a walnut door.
Remember, you can use 2, 3 or 4 hinges, whatever you feel will give your door it’s best swing for a lifetime! You won’t regret buying quality hardware, but you will regret not doing it.
I think I used three hinges on these doors and mahogany is heavier than walnut.
nice spline i-deer
Thank you.
👀👂😐👂