Hey brother the little welder is getting big he’s almost ready for his rig you be safe out there brother and keep on welding and say hi to your bro in-law love that dude
#1...!!! Chiropractic has taken me from, " Crawling and Crying ", to walking , around 4 times in the last 20 years. Just saying. That's a cool looking box .the tips and tricks were a nice addition. Thanks for sharing.
Really appreciate what you are doing, did I miss where you stated the gauge of the steel you are using? If not I curious because I am guilty of building too heavy.
Hey Jacob, just a quick comment and tip. First, your work ethic and videos should be inspiring for all young trades people, and second, when using your magnetic level against a tender surface put a strip of masking along the mag edge of your level. Still holds well but with a little cushion.
If you got back pain, and you’re driving lots of miles, I’d recommend a coccyx cushion while driving. The cushion reduces the impact on the tailbone, and impact up the spine. I drive lots and it cured me of sciatic pain and hopefully last trip to chiropractor for epic back pain.
We like to put a dragup tank and pump inside a tool box between the front cabinets. Good place for stand tops and other stuff. Like this style better, seems like so much wasted space on the US style pipe liner decks. Yet I am starting to see them up here now. The internet does strange things with ideas and information.
What blade are you using I’ve been using the Diablo blades and that’s the best I’ve found but still don’t get more than a few feet of good cutting out of them
Try accupuncture I blew out a disc in my back and it was like night and day I've actually stop eating Ibuprofen to make it throughout the day now I can go almost 2 weeks with very little pain before another session doesn't hurt at all to get it done.
Met a guy out in lone pine california wearing a schofield welding hoodie asked him if he watched the channel and said he used to be your helper cant remember his name cool though
My buddy and I fit pipe for he was the welder it dried up so we went to a fab shop and did shut downs he would always say that he could do round but it took a little more thinking to figure angles and shit he hated it that guy could tig weld a ring around ur finger lol
Wat kind oysaw is that? Lately I been working with alot of sheet metal and it's very time consuming with a gri.der and cutting wheel. Maybe I could look into the saw you have.
@@JacobSchofield have you spoke with travis field man tell him i wish he would do more content and also i wish the best for him his mi idol thst dude is a humble guy
I have the same skillsaw, is there a reason you use it all the way up, I cut with it all the way down and it kinda gives me a hard time , let me know if I’m missing something, thanks man
We are Canadian and we approve of this message. 👍🏼. (paid for by a bunch of beer drinking mounties in igloos).
Hahahahah 😂 this was awesome!!!
Agreed 👍🇨🇦🤘
Kyle from Man-i-toba? Drinking Tree Sauce and riding an Antler cow?
Hey brother the little welder is getting big he’s almost ready for his rig you be safe out there brother and keep on welding and say hi to your bro in-law love that dude
As always another awesom video Jake!!
#1...!!! Chiropractic has taken me from, " Crawling and Crying ", to walking , around 4 times in the last 20 years. Just saying. That's a cool looking box .the tips and tricks were a nice addition. Thanks for sharing.
i like your work good job man
Killing the game Jacob!
Great video Jake!! Nice rigs!! Cummins for life!!
Ayyye we can hear ya this time! LOL... killin it as always 🔥🤙🏽
Can't wait for part 2 buddy!! I too like the front box style. Baylen is growing like a weed! Next thing you know, he'll be driving 😂 hahaha.
Love the building videos
Love your videos Jake!! Keep killin it bud!
Good work !
Looks about right ❤️ from Alberta
did you ever post a part two? big fan of this design
Really appreciate what you are doing, did I miss where you stated the gauge of the steel you are using? If not I curious because I am guilty of building too heavy.
Think most of his bed is 3/16
Hey Jacob, just a quick comment and tip. First, your work ethic and videos should be inspiring for all young trades people, and second, when using your magnetic level against a tender surface put a strip of masking along the mag edge of your level. Still holds well but with a little cushion.
Dude thank you sir it was making me sick to put that level on my truck LOL
If you got back pain, and you’re driving lots of miles, I’d recommend a coccyx cushion while driving. The cushion reduces the impact on the tailbone, and impact up the spine. I drive lots and it cured me of sciatic pain and hopefully last trip to chiropractor for epic back pain.
Let’s get a front and rear bumper build series for the ‘ol dually there…pls…I hate to see her like this!
That's a dope polar bear sweater
You could build yourself a reverse hyper machine, it decompresses the discs, works amazing!
We like to put a dragup tank and pump inside a tool box between the front cabinets. Good place for stand tops and other stuff. Like this style better, seems like so much wasted space on the US style pipe liner decks. Yet I am starting to see them up here now. The internet does strange things with ideas and information.
Boy I'll tell you what these guys will do for 6 to 8 " in is just crazy lol 😂
Lmao what .?
What blade are you using I’ve been using the Diablo blades and that’s the best I’ve found but still don’t get more than a few feet of good cutting out of them
Hey man if you ever need a new pancake strap or just want a new one you should check out trun'n&burn'n straps
Did you make a vid of the Building A Canadian Style Front Tool Box part 2?
Try accupuncture I blew out a disc in my back and it was like night and day I've actually stop eating Ibuprofen to make it throughout the day now I can go almost 2 weeks with very little pain before another session doesn't hurt at all to get it done.
Osteopath and CBD for life (brand) rub it’s like tiger bomb, my wife swears by it for her neck injury
What's the thickness of the sheets?
Looks like 16ga
Met a guy out in lone pine california wearing a schofield welding hoodie asked him if he watched the channel and said he used to be your helper cant remember his name cool though
My buddy and I fit pipe for he was the welder it dried up so we went to a fab shop and did shut downs he would always say that he could do round but it took a little more thinking to figure angles and shit he hated it that guy could tig weld a ring around ur finger lol
307 area code, Gillette wyoming! Fuck yeah!
Got a buddy out there heavy equipment welder
jake what boots you rocking in the 16 min range tackin?
Wat kind oysaw is that? Lately I been working with alot of sheet metal and it's very time consuming with a gri.der and cutting wheel. Maybe I could look into the saw you have.
22k them views finaly getting g up their
How thick is the plate your using? I debated doing this on my bed when I build it but couldn’t figure out how I wanted to do it lol
Where is Part 2
I dig your jacket man where did you get it costum from brotha?Keep up the work🙌
What powder you using in the beginning of vid????
It would be cool to have a slide out drawer on each side at the bottom.
There will be a stack of 4 or 5 on the driver side. And 2 on the passenger side
Only thing i could say is cabinet should went to top of cab
It's nice to be able to see over the top from the drivers seat though when backing up.
👍👍
Where is part 2? Did you reinforce where you cut out the bed ? Or it wasn’t needed
I actually scrapped that bed. Did not like how the big box turned out I have another bed build that is getting Dang close to being done
@@JacobSchofield great can’t wait to see it
What happened to your pipe pro 400 , you have a pro 400 now ?
Any updates?
What gauge sheet you using
Where's the rest of the part for this?? I wanna see how it is all finished up
It didn’t finish up very good at all. I’m actually scrapping the bed and starting over.
Nice video what is the brand name of the saw ? thank you for sharing
I’d guess evolution EVOSAW230
Where in idaho are you abouts?
Were is part 2?
Another great video bud. Love the build videos! But what happened to the double deck bed? And when did you build this new bed?
So this is the bottom deck of the double deck. The actual top deck is on jackstands right now in the backyard lol
I gotcha. Always thought that one was a good idea. Keep em coming man! Always enjoy the lessons you teach
@@JacobSchofield have you spoke with travis field man tell him i wish he would do more content and also i wish the best for him his mi idol thst dude is a humble guy
𝕡𝕖𝕣𝕗𝕖𝕔 𝕧𝕚𝕕𝕖𝕠 𝕛𝕒𝕔𝕠𝕓𝕠
You built that rustic style door ?
Yes sir it’s a table top.
Get travis field to help out best welder on youtube and stand up dude willing to help out anyone
Yall boys need some 450s for as big as yalls beds are
Is that you’re welding bed?
Yes it is one of 5 I’ve built
where you been young fella ? im not getting any notification on your posts
I don’t know Greg I haven’t put up a ton of videos but still putting videos up. Maybe TH-cam is hiding me 😂
I have the same skillsaw, is there a reason you use it all the way up, I cut with it all the way down and it kinda gives me a hard time , let me know if I’m missing something, thanks man
Scoring the material makes it easier to bend
What ever happened to this project?
Litl man's going to be a bull hauler..yee yee...not a welder..hahaha..js 😎..
A welders bed is never done.
That is the truth kinda makes them hard to paint 😂
All Canadian........lol
and no audio
There’s tons of audio
I noticed that too. I do need to figure out why my program is doing that